摘要(英) |
In this research, we discussed the influence of the absorption light path length entering the solar cells by the surface texture on the silicon solar cells.
On the single crystalline silicon wafer, this research used nano-sphere lithography by plasma etching to construct the nano-cylinders structure. After that, we used the ion source to bombard the nano-cylinders in order to alter the surface topography and also used the sputtering system to sputter a layer of AR-coating on the surface. This AR-coating can decrease the surface reflectance which results in the increasing luminous flux that improves the absorption path length of light. Finally, we discussed the impact on the optical properties by changing the width of structures. It can be discussed the effects of the surface topography or the different width structures by measuring the reflectance, transmittance, and the scattering of the nano-cylinders. Low reflectivity can decrease the loss that caused by the reflection. And, the haze parameter is proportional to the absorption path length of light entering the solar cells.
Experimental results showed the highest haze parameter from the pacifier shape at the top of nano-cylinders by additional ion etching. Then, the GZO AR-coating on nano-cylinders can decrease surface reflection about 20%, and the nano-cylinders have low reflection at different angle. Finally, the nano-cylinders of 337 nm in width forming from the nano-spheres of 300 nm in diameter show the best result.
|
參考文獻 |
[1] 謝宏健,“以奈米小求提升矽薄膜太陽能電池吸收之研究”,國立中央大學碩士論文 (2008)。
[2] A. C. Pan and etc,“Effect of thickness on bifacial silicon solar cells”, 6th Spanish Conference on Electronic Devices (2007).
[3] K. A. Münzer and etc,“Transactions on Electron Devices”, IEEE, Vol. 46, No. 10, 2055 (1999).
[4] N. Mason and etc,“Proceedings of the 21th European Photovoltaic Solar Energy Conference and Exhibition”, Dresden, pp. 521-523 (2006).
[5] R. Lago-Aurrekoetxea,“Recombinación superficial y de volumen en
células solares con tecnología fósforo-aluminio sobre silicio”, Ph. D. Thesis, UPM, Madrid (2002 ).
[6] 蔡進譯,“超高效率太陽能電池-從愛因斯坦的光電效應談起”,物理雙月刊 (廿七卷五期) 10月 (2005)。
[7] 吳乾禎,“單晶矽太陽能電池之表面結構設計與光學計量模型之建立”,國立成功大學碩士論文 (2008)。
[8] J. Y. Lin and etc,“Photovoltaic Improvement of Single-Crystalline Si Space Solar Cell”, National EDMS, p. 167.
[9] C. T. Sah,“Reduction of Solar Cell Efficiency Across the Back Surface Field Junction”, Solid State Electronics, Vol. 31, pp.451-457(1984).
[10] J. Zhao and etc,“24% Efficient PERL Silicon Solar Cell: Recent improvements in High Efficiency Silicon Cell Research”, Solar Energy Material and Solar Cells, 41/42, 87-99 (1996).
[11] J. Zhao and etc,“Improvements in silicon solar cell performance”, IEEE, Vol. 90, pp. 399-401 (1991).
[12] 王宗新,“金字塔抗反射構之製作及其單晶矽太陽能電池之應用”,國立中山大學碩士論文 (2007)。
[13] Michael Berginski and etc,“The effect of front ZnO:Al surface texture and optical transparency on efficient light trapping in silicon thin-film solar cells”, J. Appl. Phys. 101, 074903 (2007).
[14] Tao Meng and etc,“Surface texturing by solution deposition for omnidirectional antireflection”, Appled Physics Letters 91, 08118 (2007).
[15] Bermel Peter and etc,“Improving thin-film crystalline silicon solar cell efficiencies with photonic crystals”,Optics express, Vol.15, No.25 (2007).
[16] 詹佳樺,“溶膠-凝膠法治被聚甲基丙烯酸甲酯/二氧化矽混成體之研究”,國立中央大學碩士論文 (2001)。
[17] 廖益廷,“溶膠凝膠法合成單一分散之氧化矽奈米微球”,逢甲大學專題研究 (2006)。
[18] 梁致遠,“次微米灰階氮化矽結構對發光二極體光型修整機制之研究”,國立中央大學碩士論文 (2007)。
[19] 張勁燕,“半導體製程設備”,五南出版社 (2000)。
[20] Shojiro Kawakami and etc, “Mechanism of shape formation of three-dimensional periodic nanostructures by bias sputtering”,
Appl. Phys. Lett., Vol. 74, No. 3, 18 January (1999).
[21] Satoshi Tazawa and etc,“A General Characterization and Simulation Method for Deposition and Etching Technology”, IEEE Transactions on Semiconductor Manufacturing, Vol. 5. No. 1, February (1992).
[22] 葉渝雯,“自我複製結構膜光學性質之研究”,國立中央大學碩士論文 (2008)。
[23] A. J. Cox and etc,“An experiment to measure Mie and Rayleigh total scattering cross sections”, Am. J. Phys. 70 (6), June (2002).
[24] J. Krč and etc,“Optical modeling of a-Si:H solar cells deposited on textured glass/SnO2 substrates”, J. Appl. Phys., Vol. 92, No. 2, 15 July (2002).
[25] Klaus Jäger and etc,“Light scattering properties of surface-textured substrates”, Phys. Status Solidi C, 1-4 (2010).
[26] 欒丕綱、陳啟昌 ,“光子晶體”,五南圖書出版社 (2005)。
[27] 翟光耀,“光子晶體偏振分光鏡之設計與製作”,國立中央大學碩士論文 (2009)。
[28] 李正中,“薄膜光學與鍍膜技術”,藝軒出版社 (2006)。
[29] Leadership in Reflectance Technology,“A Guide to Integrating Sphere Theory and Applications”.
|