希爾伯特-黃變換(HHT)在旋轉機械之軸承故障診斷的應用

以作者查詢圖書館館藏

、以作者查詢臺灣博碩士

、以作者查詢全國書目

、勘誤回報

、線上人數：19

、訪客IP：18.220.64.128

姓名

傅翰敏(Han-min Fu) 查詢紙本館藏

畢業系所

機械工程學系

論文名稱

希爾伯特-黃變換(HHT)在旋轉機械之軸承故障診斷的應用
(Application of Hilbert-Huang Transform to the Bearing Fault Diagnosis of Rotating Machinery)

相關論文

★ 四弦型非對稱光學讀取頭致動器模態共振分析與抑制	★ 網路連接儲存裝置熱分析與設計
★ 小型垂直軸風力發電機之有限元素分析	★ 平板受聲源作用之振動與輻射聲場分析
★ 壓電吸振器應用於平板的振動與噪音控制	★ 主動式吸振器應用於薄板減振與減噪
★ 離散振動系統之分析軟體製作	★ 有洞薄方板之動態分析與激振後之聲場
★ 撓性結構之主動振動控制	★ 速度與位移回饋式壓電吸振器之減振研究
★ 以LabVIEW為介面之模態測試軟體製作	★ 電壓回饋壓電吸振器對平板之振動控制
★ 可調式消音閥的分析與最佳設計	★ 旋轉樑的動態分析與壓電吸振器之減振設計
★ 自感式壓電吸振器之設計與應用於矩形板之減振	★ 多孔薄方板之振動與聲場分析

檔案

[Endnote RIS 格式]

[Bibtex 格式]

[相關文章]

[文章引用]

[完整記錄]

[館藏目錄]

[檢視]

[下載]

本電子論文使用權限為同意立即開放。
已達開放權限電子全文僅授權使用者為學術研究之目的，進行個人非營利性質之檢索、閱讀、列印。
請遵守中華民國著作權法之相關規定，切勿任意重製、散佈、改作、轉貼、播送，以免觸法。

摘要(中)

本篇的主要目的在於使用後處理總體經驗模態分解法來改善之前總體經驗模態分解法的缺點，即模態混雜與端點效應。首先將旋轉機械之振動訊號透過後處理總體經驗模態分解法分解成一組數個無模態混雜且符合內稟模態函數基本條件的內稟模態函數，並選擇其中含有故障特徵的內稟模態函數進行分析。
軸承故障特徵的提取則是將內稟模態函數的包絡線經過希爾伯特轉換後繪出時頻譜，最後計算出希爾伯特邊際譜，觀察是否含有軸承故障特徵頻率以達到故障檢測目的，本篇除了檢測軸承故障的種類外，並將進行軸承故障程度上的辨別。

摘要(英)

In order to improve the drawbacks of Ensemble Empirical Mode Decomposition (EEMD), such as mode mixing and end effect problem, we present an improved HHT approach based on post-processing of EEMD to solve the problem in this paper. Once the Intrinsic Mode Functions (IMFs) are obtained from the decomposition process, the crucial step is to extract the fault features from the information-contained IMFs.
The amplitude modulation (AM) phenomenon can be discovered in the IMFs with fault information. In this paper, we not only classify the types of bearing fault but also identify the level of the fault.

關鍵字(中)

★ 希爾伯特-黃變換
★ 故障診斷

關鍵字(英)

★ HHT
★ fault diagnosis

論文目次

摘要 i
ABSTRACT ii
ACKNOWLEDGEMENT iii
LIST OF TABLES v
LIST OF FIGURES vi
1. INTRODUCTION 1
1.1 Motivation 1
1.2 Literature Survey 2
2. BACKGROUND INFORMATION 4
2.1 Hilbert-Huang Transform (HHT) 4
2.2 Empirical Mode Decomposition (EMD) 4
2.3 Ensemble EMD, EEMD and post-processing of EEMD 5
2.4 Envelope Analysis and Marginal Hilbert Spectrum 7
3. EXPERIMENTAL VERIFICATION 9
4. CONCLUSIONS 12
5. FUTURE WORK 13
REFERENCES 14

參考文獻

[1] Norden E. Huang, Zheng Shen, Steven R. Long, Manli C. Wu, Hsing H. Shih, Quanan Zheng, Nai-Chyuan Yen,Chi Chao Tung, Henry H. Liu, “The empirical mode decomposition and Hilbert spectrum for nonlinear and non-stationary time series analysis,” Proceedings of the Royal Society London A, Vol. 454, pp.903–995, 1998.
[2] Norden E. Huang, Class note of “Introduction to HHT”, Research Center for Adaptive Data Analysis, National Central University, 2008.
Web site: http://rcada.ncu.edu.tw/
[3] Yu Yang, Dejie Yu, Junsheng Cheng, “A roller bearing fault diagnosis method based on EMD energy entropy and ANN,” Journal of Sound and vibration, Vol.294, pp.269-277, 2006.
[4] Ruqiang Yan, Robert X. Gao, “Hilbert-Huang Transform-Based vibration signal analysis for machine health monitoring,” IEEE Transactions on instrumentation and measurement, Vol. 55, No. 6, 2006.
[5] Yu Yang, Yigang He, Junsheng Cheng, Dejie Yu, “A gear fault diagnosis using Hilbert spectrum based on MODWPT and a comparison with EMD approach,” Measurement, Vol. 42, pp.542-551, 2009.
[6] Dejie Yu, Junsheng Cheng, Yu Yang, “Application of EMD method and Hilbert Spectrum to the diagnosis of roller bearings,” Mechanical Systems and Signal Processing, Vol. 19, pp.259-270, 2003.
[7] Yu Yang, Dejie Yu, Junsheng Cheng, “A fault diagnosis approach for roller bearing based on IMF envelope spectrum and SVM,” Measurement, Vol. 40, pp.943-950, 2006.
[8] Junsheng Cheng, Dejie Yu, Yu Yang, “A fault diagnosis approach for roller bearings based on EMD method and AR model,” Mechanical Systems and Signal Processing, Vol. 20, pp.350-362, 2006.
[9] Dejie Yu, Yu Yang, Junsheng Cheng, “Application of time-frequency entropy method based on Hilbert-Huang transform to gear fault diagnosis,” Measurement, Vol. 40, pp.823-830, 2007.
[10] 于德介、程軍聖、楊宇編，機械故障診斷的Hilbert-Huang變換方法，
科學出版社。(2006)
[11] Wu, Z. and Huang, N. E., “Ensemble Empirical Mode Decomposition: a noise-assisted data analysis method,” Advances in Adaptive Data Analysis, Vol. 1, No. 1, pp. 1-41, 2009.
[12] Yaguo Lei, Zhengjia He, Yanyang Zi, “Application of the EEMD method to rotor fault diagnosis of rotating machinery,” Mechanical Systems and Signal Processing, Vol. 23, pp.1327-1338, 2009.
[13] Yaguo Lei, Ming J. Zuo, “Fault diagnosis of rotating machinery using an improved HHT based on EEMD and sensitive IMFs,” Measurement Science and Technology, Vol. 20, 125701(12pp), 2009.
[14] T Y Wu, Y L Chung, “Misalignment diagnosis of rotating machinery through vibration analysis via the hybrid EEMD and EMD approach,” Smart Materials and Structures, Vol. 18, 095004(13pp), 2009.
[15] M.P. Norton, Fundamental of Noise and Vibration Analysis for Engineers, Cambridge University Press, 1989.
[16] Patrick Flandrin, Gabriel Rilling, Paulo Gon?alv?s, “Empirical mode decomposition as a filter bank”, SIGNAL PROCESSING LETTERS, Vol. 11, No. 2, 2004

指導教授

黃以玫、吳天堯
(Yi-mei Huang、Tian-yau Wu)

審核日期

2010-7-28

推文