參考文獻 |
ANSYS, “ANSYS Fluent user’s guide,” ANSYS, Inc., 2009.
Bassiouny, M.K., Martin, H., “Flow distribution and pressure drop in PHE-I, U-type arrangement,” Chem. Eng. Sci., 39:693-700, 1984.
Bejan, A., ‘‘A study of entropy generation in fundamental convective heat transfer,’’ J. Heat Transfer, 101:718–725, 1979.
Bejan, A., “Entropy generation minimization: The new thermodynamics of finite-size devices and finite-time processes,” J. Applied Physics, 79:1191-1218, 1996.
Ciofalo, M., Stasiek, J., and Collins, M.W., “Investigation of flow and heat transfer in corrugated passages-II. Numerical simulations,” Int. J. Heat and Mass Transfer, 39: 165–192, 1996.
Ciofalo, M., Piazza, I., and Stasiek, J., “Investigation of flow and heat transfer in corrugated-undulated passages,” Heat and Mass Transfer, 36:449–462, 2000.
Dovic, D., Palm, B., Svaic, S., “Generalized correlations for predicting heat transfer and pressure drop in plate heat exchanger channels of arbitrary geometry,” Int. J. Heat and Mass Transfer, 52:4553-4563, 2009.
Focke, W.W., Knibble, P.G., Flow visualization in parallel plate ducts with corrugated walls, CSIR report CENC M-519, CSIR, Pretoria, South Africa, 1984.
Galeazzo, F.C.C., Miura, R.Y., Gut, J.A.W., Tadini, C.C., “Experimental and numerical heat transfer in a plate heat exchanger,” Chemical Engineering Science, 61: 7133-7138, 2006.
Huang, P., Bradshaw, P., Coakley, T., “Skin friction and velocity profile family for compressible turbulent boundary layers,” AIAA Journal, 31(9):1600-1604, 1993.
Incropera, F.P., Dewitt, D.P., Fundamentals of Heat and Mass Transfer, John Wiley & Sons, New York, 2001.
Jain, S., Joshi, A., Bansal, P.K., “A new approach to numerical simulation of small sized plate heat exchangers with chevron plates,” J. Heat Transfer, 129:291-297, 2007.
Jayatilleke, C., “The influence of prandtl number and surface roughness on the resistance of the laminar sublayer to momentum and heat transfer,” Prog. Heat Mass Transfer, 1:193-321, 1969.
Kader, B., “Temperature and concentration profiles in fully turbulent boundary layers,” Int. J. Heat Mass Transfer, 24(9):1541-1544, 1981.
Kanaris, A.G., Mouza, A.A., Paras, S.V., “Flow and heat transfer in narrow channels with corrugated walls a CFD code application,” Chemical Engineering Research and Design, 83:460-468, 2005.
Kays, W.M., and London, A.L., Compact Heat Exchangers, McGraw-Hill, New York, 1984.
Kim, S.E., Choudhury, D., “A near-wall treatment using wall functions sensitized to pressure gradient,” Separated and Complex Flows, In ASME FED Vol.217, 1995.
Ko, T.H., Ting, K., “Optimal Reynolds number for the fully developed laminar forced convection in a helical coiled tube,” Energy, 31:2142-2152, 2006.
Ko, T.H., “Analysis of optimal Reynolds number for developing laminar forced convection in double sine ducts based on entropy generation minimization principle,” Energy Conversion and Management, 47:655-670, 2006.
Launder, B.E., Spalding D.B., Lectures in Mathematical Models of Turbulence, Academic Press, 1972.
Mehrabian, M.A., Poulter, R., “Hydrodynamics and thermal characteristics of corrugated channels: computational approach,” Applied Mathematical Modeling, 24: 343-364, 2000.
Muley, A., Manglik, R.M., “Experimental study of turbulent flow heat transfer and pressure drop in a plate heat exchanger with chevron plates,” J. HeatTransfer, 121: 110–117, 1999.
Muley, A., Manglik, R.M., Metwally, H. M., “Enhanced heat transfer characteristics of viscous liquid flows in a chevron plate heat exchanger,” J. Heat Transfer, 121: 1011–1017, 1999.
Naterer, G.F., Camberos, J.A., Entropy-based design and analysis of fluids engineering systems, CRC Press, New York, 2008.
Okada, K., Ono, M., Tomimura, T., Okuma, T., Konno, H., Ohtani, S., “Design and heat transfer characteristics of new plate heat exchanger,” Heat Transfer Jpn. Res., 1:90–95, 1972.
Paakkonen, T.M., Riihimaki, M., Ylonen, R., Muurinen, E., Simonson, C.J. and Keiski, R.L., “Evaluation of heat transfer boundary conditions for CFD modeling of a 3D plate heat exchanger geometry,” Proceedings of 7th Int. Conference on heat exchanger fouling and cleaning challenges and opportunities, Vol. 5, Tomar, Portugal, 2007.
Rao, B.P., Das, S.K., “An experimental study on the influence of flow maldistribution on the pressure drop across a PHE,” J. Fluids Eng., 126:680-691, 2004.
Sahin, A.Z. and Ben-Mansour, R., “Entropy generation in laminar fluid flow through a circular pipe”, Entropy, 5:404-416, 2003.
Shih T.H., Liou W.W., Shabbir A., Yang Z., Zhu J., “A new k-ε eddy-viscosity model for high Reynolds number turbulent flows - model development and validation,” Computers Fluids, 24:227-238, 1995.
Tsai, Y.C., Liu, F.B., Shen, P.T, “Investigations of the pressure drop and flow distribution in a chevron-type plate heat exchanger,” Int. Communications in Heat and Mass Transfer, 36:574-578, 2009.
White, F., Christoph, G., “A simple new analysis of compressible turbulent skin friction under arbitrary conditions,” Technical Report AFFDL-TR-70-133, 1971.
Wolfstein, M., “The velocity and temperature distribution of one-dimensional flow with turbulence augmentation and pressure gradient,” Int. J. Heat Mass Transfer, 12:301-318, 1969.
Yakhot, V., Orszag, S.A., “Renormalization group analysis of turbulence: I. basic theory,” J. Scientific Computing, 1(1):1-51, 1986.
Zimparov, V., “Extended performance evaluation criteria for enhanced heat transfer surfaces: heat transfer through ducts with constant wall temperature,” Int J. Heat Mass Transfer, 43:3137–3155, 2000.
Zimparov, V., “Energy conservation through heat transfer enhancement techniques,” Int. J. Energy Res., 26:675–696, 2002.
王啟川,熱交換器設計,五南圖書出版有限公司,台中,2001。
曾廣彬,「板式熱交換器之流場模擬與流動分佈不均勻態分析」,國立中央大學機械工程研究所,碩士論文,2010。
羅弘達,「板式熱交換器之入出口壓降實驗分析」,國立中央大學機械工程研究所,碩士論文,2006。
翁嘉鴻,「水對水板式熱交換器性能測試分析」,國立中央大學機械工程研究所,碩士論文,2002。
|