參考文獻 |
[1] B. Asli et al. ,“ Melt-blowing thermoplastic polyurethane and polyether -block-amide elastomers : Effect of processing conditions and crystallization on web properties .”, Polym. Eng. Sci. , 49(7) , 1340-1349 , 2009
[2] B. Asli et al. ,“ Crystallization behavior of elastomeric block copolymers : thermoplastic polyurethane and polyether-block-amide .”, J. of Appl. Polym. Sci. , 111(3) , 1246-1256 , 2009
[3] S. P. Lin et al. ,“ Volume shrinkages and mechanical properties of various fiber-reinforced hydroxyethyl methacrylate-polyurethane/unsaturated polyester composites .”, Composites Sci. and Technol. , 68(3-4) , 709-717 , 2008
[4] M. N. S. Kumar and Siddaramaiah ,“ Thermo gravimetric analysis and morphological behavior of castor oil based polyurethane–polyester nonwoven fabric composites .” J. of Appl. Polym. Sci. , 106(5) , 3521-3528 , 2007
[5] D. J. Hourston et al. ,“ Structure-property study of polyurethane anionomers based on various polyols and diisocyanates .”, J. of Appl. Polym. Sci. , 66(10) , 2035-2044 , 1997
[6] R. A. Phillips et al. ,“ Structure-property relationships and moisture sensitivity of PDMS/PTMO mixed soft segment urethane elastomers .”, J. of Macromol. Sci. Phys. , 27(2-3) , 245-274 , 1988
[7] X. H. Yu et al. ,“ Polydimethylsiloxane-polyurethane elastomers : Synthesis and properties of segmented copolymers and related zwitterionomers .”, J. of Polym. Sci. Polym. Phys.-Ed. , 23(11) , 2319-2338 , 1985
[8] T. A. Speckhard et al. ,“ Properties of polyisobutylene polyurethane block copolymers : 2. Macroglycols produced by the ‘inifer’ technique .”, Polymer , 26(1) , 55-69 , 1985
[9] D. B. Klinedinst et al. ,“ Structure–property behavior of segmented polyurethaneurea copolymers based on an ethylene–butylene soft segment .”, Polymer , 46(23) , 10191-10201 , 2005
[10] T. K. Chen et al. ,“ Effects of number-average molecular weight of network chain on physical properties of cis-polybutadiene-containing polyurethane .”, Polym. Eng. Sci. , 32(2) , 115-121 , 1992
[11] C. Li et al. ,“ Morphology of segmented polybutadiene-polyurethane elastomers .”, Macromol. , 21(8) , 2367-2375 , 1988
[12] B. Bengtson et al. ,“ Thermal and mechanical properties of solution polymerized segmented polyurethanes with butadiene soft segments .”, Polymer , 26(6) , 895-900 , 1985
[13] C. M. Brunette et al. ,“ Structural and mechanical properties of polybutadiene-containing polyurethanes .”, Polym. Eng. Sci. , 21(3) , 163-171 , 1981
[14] N. S. Schneider and R. W. Matton ,“ Thermal transition behavior of polybutadiene containing polyurethanes .”, Polym. Eng. Sci. , 19(15) , 1122-1128 , 1979
[15] K. Ono et al. ,“ Effects of number-average molecular weight of liquid Hydroxy-terminated polybutadiene on physical properties of the elastomers .”, J. of Appl. Polym. Sci. , 21(23) , 3223-3235 , 1977
[16] G. N. Petrov and A. S. Lykin ,“ Synthesis of oligomers with reactive end groups and elastomers derived from them. Review .”, Polym. Sci. U.S.S.R. , 20(6) , 1351-1362 , 1977
[17] P. W. Ryan ,“ Polyurethane based on hydroxyl-terminated polybutadienes .”, Brit. Polym. J. , 3(3) , 145-153 , 1971
[18] T. A. Speckhard and S. L. Cooper ,“ Ultimate tensile properties of segmented polyurethane elastomers : factors leading to reduced properties for polyurethanes based on nonpolar soft segments .”, Rub. Chem. Technol. , 59(3) , 405-431 , 1986
[19] C. Hepburn , Polyurethane Eastomers , Appl. Sci. , London , 1982
[20] Oertel and Guenter Eds. , Polyurethane Handbook , Hanser Publisher. , New York , 1985
[21] S. B. Clough and N. S. Schneider ,“ Structural studies on urethane elastomers .” , J. of Macromol. Sci.-Phys. , B2(4) , 553-566 , 1968
[22] D. Nissen and R. A. Markovs ,“ Aromatic diamines as chain extenders in RIM urethane elastomers .” , J. of Elastomers and Platics , 15(2) , 96-112 , 1983
[23] D. Tyagi et al. ,“ Morphology and properties of segmented polyurethane-urea copolymers prepared via t-alcohol "chain extension" .”, Polmer Preprints , 26(2) , 12 , 1985
[24] C. S. Schollenberger and F. D. Stewart ,“ Thermoplastic urethane structure and ultraviolet stability .”, Advances in urethane Sci. and Technol. , 2 , 71-108 ,1973
[25] R. R. Aitken and G. M. F. Jeffs ,“ Thermoplastic polyurethane elastomers based on aliphatic diisocyanates. Thermal transitions .”, Polymer , 18(2) , 197-198 , 1977
[26] J. W. Britain and P. G. Gemeinhardt ,“ Catalysis of the isocyanate-hydroxyl reaction .”, J. of Appl. Polym. Sci. , 4 , 207-211 , 1960
[27] M. Serrano et al. ,“ Transport-morphology relationships in segmented polybutadiene polyurethanes : 1. Experimental results .”, Polymer , 28(10) , 1667-1673 , 1987
[28] M. Serrano et al. ,“ Transport-morphology relationships in segmented polybutadiene polyurethanes : 2. Analysis .”, Polymer , 28(10) , 1674-1679 , 1987
[29] D. J. Meier ,“ Theory of the morphology of block copolymers .”, Polym. Prepr. Am. Chem. Soc. Div. Polym. Chem. , 11(2) , 400-405 , 1970
[30] C. Li and S. L. Cooper ,“ Direct observation of the micromorphology of polyether polyurethanes using high-voltage electron microscopy .”, Polymer , 31(1) , 3-7 , 1990
[31] D. J. Kinning et al. ,“ Effect of morphology on the transport of gases in block copolymers .”, Macromol. , 20(5) , 1129-1133 , 1987
[32] J. Blackwell and K. H. Gardner ,“ Structure of the hard segments in polyurethane elastomers .”, Polymer , 20(1) , 13-17 , 1979
[33] J. Blackwell et al. ,“ Structure of polyurethane elastomers. X-ray diffraction and conformational analysis of MDI-propandiol and MDI-ethylene glycol hard segments .”, Polymer , 22(11) , 1534-1539 , 1981
[34] R. Bonart ,“ Thermoplastic elastomers .”, Polymer , 20(11) , 1389-1403 , 1979
[35] J. Blackwell and M. R. Nagarajan ,“ Conformational analysis of poly(MDI-butandiol) hard segment in polyurethane elastomers .”, Polymer , 22(2) , 202-208 , 1981
[36] M. Xu et al. ,“ Structure and morphology of segmented polyurethanes. 1. Influence of incompatability on hard-segment sequence length .”, Polymer , 24(10) , 1327-1332 , 1983
[37] T. A. Speckhard et al. ,“ Properties of polyisobutylene-polyurethane block copolymers. I. Macroglycols from ozonolysis of isobutylene-isoprene copolymer .”, Polym. Eng. Sci. , 23(6) , 337-349 , 1983
[38] T. L. Smith ,“ Tensile strength of polyurethane and other elastomeric block copolymers .”, J. of Polym. Sci. Polym. Phys.-Ed. , 12(9) , 1825-1848 , 1974
[39] T. L. Smith ,“ Strength of elastorners — a perspective .”, Polym. Eng. Sci. , 17(3) , 129-143 , 1977
[40] R. Bonart and K. Hoffmann ,“ Orientational behavior of segmented polyether urethanes as a function of strain and solvents used .”, Macromol. Chem. Phys. , 184(7) , 1529-1546 , 1983
[41] J. T. Koberstein et al. ,“ Compression-molded polyurethane block copolymers. 1. Microdomain morphology and thermomechanical properties .”, Macromol. , 25(23) , 6195-6204 , 1992
[42] J. T. Koberstein and L. M. Leung ,“ Compression-molded polyurethane block copolymers. 2. Evaluation of microphase compositions .”, Macromol. , 25(23) , 6205-6213 , 1992
[43] 邱家永,「嵌段式PU的結構與性質(I)」,國立中央大學,博士論文,民國86年
[44] C. Z. Yang et al. ,“ Morphology and properties of polybutadiene- and polyether-polyurethane zwitterionomers .”, Macromol. Chem. , 184(3) , 651-668 , 1983
[45] T. A. Speckhard et al. ,“ Properties of segmented polyurethane zwitterionomer elastomers .”, J. of Macromol. Sci.-Phys. , B23(2) , 175-199 , 1984
[46] Y. Camberlin et al. ,“ Model hard segments from diphenylmethane diisocyanate and different chain extenders, and corresponding linear block polyurethanes .”, J. of Polym. Sci. Polym. Phys.-Ed. , 20(6) , 1445-1456 , 1982
[47] I. Yilgor et al. ,“ Siloxane-urea segmented copolymers. 1. Synthesis and characterization of model polymers from MDI and α,ω-bis(aminopropyl)polydimethylsiloxane .”, Polym. Bull. , 8(11-12) , 535-542 , 1982
[48] Y. Camberlin et al. ,“ Synthesis and DSC study of model hard segments from diphenylmethane diisocyanate and butane diol .”, J. of Polym. Sci. Polym. Chem. Ed. , 20(2) , 383-392 , 1982
[49] Y. Li et al. ,“ Multiphase structure of a segmented polyurethane: effects of temperature and annealing .”, Macromol. , 25(26) , 7365-7372 , 1992
[50] P. W. Seymour and S. L. Cooper ,“ Thermal Analysis of Polyurethane Block Polymers .”, Macromol. , 6(1) , 48-53 , 1973
[51] T. R. Hesketh et al. ,“ Differential scanning calorimetry analysis of morphological changes in segmented elastomers .”, Polym. Eng. Sci. , 20(3) , 190-197 , 1980
[52] L. M. Leung and J. T. Koberstein ,“ DSC annealing study of microphase separation and multiple endothermic behavior in polyether-based polyurethane block copolymers .”, Macromol. , 19(3) , 706-713 , 1986
[53] J. T. Koberstein and T. P. Russell ,“ Simultaneous SAXS-DSC study of multiple endothermic behavior in polyether-based polyurethane block copolymers .”, Macromol. , 19(3) , 714-720 , 1986
[54] Y. Li et al. ,“ Multiphase structure of segmented polyurethanes: its relation with spherulite structure .”, J. of Polym. Sci. Polym. Phys.-Ed. , 31(7) , 853-867 , 1993
[55] 謝添壽,「嵌段式PU的結構與性質(II)」,國立中央大學,博士論文,民國87年
[56] Z. S. Petrovic et al. ,“ The effect of soft-segment length and concentration on phase separation in segmented polyurethanes .”, J. of Polym. Sci. Polym. Phys.-Ed. , 27(3) , 545-560 , 1989
[57] J. W. C. Van Bogart et al. ,“ Structure-property relationships in polycaprolactone-polyurethanes .”, J. of Polym. Sci. Polym. Phys.-Ed. , 21(1) , 65-95 , 1983
[58] S. C. S. Paik et al. ,“ Properties of segmented poly(urethaneureas) based on 2,4-toluene diisocyanate. 1. Thermal transitions, x-ray studies, and comparison with segmented poly(urethanes) .”, Macromol. , 13(1) , 111-116 , 1980
[59] N. S. Schneider et al. ,“ Structure and properties of polybutadiene-containing polyurethanes .”, Advance in Urethane Sci. and Technol. , 8 , 49-74 , 1981
[60] C. P. Christenson et al. ,“ Model MDI/butanediol polyurethanes : molecular structure, morphology, physical and mechanical properties .”, J. Polym. Sci. Polym. Phys. , 24(7) , 1401-39 , 1986
[61] M. Minsheng et al. ,“ Studies on cure reaction kinetics of diisocyanates and hydroxyl terminated polybutadiene by IR .”, 高分子材料科學與工程 , 1993(02) , 9:65 , 1993
[62] C. Zhang et al. ,“ Amide II and amide III bands in polyurethane model soft and hard segments .”, Polym. Bull. , 60(1) , 97-101 , 2008
[63] J. Lin et al. ,“ Preparation and characterization of waterborne polyurethaneurea composed of dimer fatty acid polyester polyol .”, Journal of Nanomaterials , 2006(1) , 1-10 , 2006
[64] Y. Ren et al. ,“ Synthesis of polyurethane acrylates by hydrogenated castor oil and dimer-based polyester diol and study on pressure-sensitive adhesive .”, J. of Appl. Polym. Sci. , 98(4) , 1814-1821 , 2005
[65] Y. Ren et al. ,“ Synthesis of polyurethane acrylate and application to ultraviolet-curable pressure-sensitive adhesive .”, Polymer-Plastics Technol. and Eng. , 45(4) , 495-502 , 2006
[66] 廖家陽,「巨大基團對Polyurethane urea結構與性質的影響」,國立中央大學,碩士論文,民國96年
[67] 李國銘,「硬質鏈上巨大基團對防水性polyester PU的影響」,國立中央大學,碩士論文,民國99年
[68] 李俊德,「軟質段分子量及硬質段鏈延長劑對PB-based PU 之影響」,國立中央大學,碩士論文,民國83年
[69] J. Blackwell et al. ,“ Structure of polyurethane elastomers : effect of chain extender length on the structure of MDI/diol hard segments .”, Macromol. Sci. , 23(7) , 950-956 , 1982
[70] Y. Camberlin and J. P. Pascault ,“ Quantitative DSC evaluation of phase segregation rate in linear segmented polyurethanes and polyurethaneureas .”, J. of Polym. Sci. Polym. Phys.-Ed. , 21(2) , 415-423 , 1983
[71] A. Takahara et al. ,“ Microphase separated structure and blood compatibility of segmented poly(urethaneureas) with different diamines in the hard segment .”, Polymer , 26(7) , 978-986 , 1985
[72] J. Blackwell and C. D. Lee ,“ Hard-segment polymorphism in MDI/diol-based polyurethane elastomers .”, J. of Polym. Sci. Polym. Phys. Ed. , 22(4) , 759-772 , 1984
[73] 黃世敏,「非極性式水性聚胺基甲酸酯-?酯之合成、結構與物性」,國立中央大學,博士論文,民國97年
[74] 高世濱,「巨大基團對Polyurethane結構與性質的影響」,國立中央大學,碩士論文,民國98年
[75] J. W. C. Van Bogart et al. ,“ Annealing-induced morphological changes in segmented elastomers .”, Polymer , 22(10) , 1428-1438 , 1981
|