參考文獻 |
[1] Jang, D. M. ; Ryu, C.; Lee, K. Y. ; Cho, B. H.; Kim, J. ; Oh, T. S.; Lee, W. J. ; Yu, J. “Development and evaluation of 3-D SiP with vertically interconnected through silicon vias (TSV)“, Electronic Components and Technology Conference 57th, Nevada,USA , pp. 847-852, May 2007,
[2] K. Kondo, T. Yonezawa, D. Mikami, T. Okubo, Y. Taguchi, K. Takahashi, and D. P. Barkey, “High-aspect-ratio copper-via-filling forthree -dimensional chip stacking,” J. Electrochem. Soc. , vol 152, pp. 173–177 , 2005.
[3] R. Beica, C. Sharbono, T. Ritzdorf, “Through Silicon Via Copper electrodeposition for 3D Integration” Proc. Electronic Components and Technology Conference, Florida, USA , pp. 577-583, May 2008.
[4] O. Luhna,, C. Van Hoof , W. Ruythooren, J.-P. Celis, “Barrier and seed layer coverage in 3D structures with different aspect ratios using sputtering and ALD processes” Microelectronic Engineering ,vol 85, pp.1947–1951,2008.
[5] C. K. Hu and J. M. E. Harper, “Copper interconnection and reliability”, MaterialsChemistry and Physics , vol 52, pp.5-12,1998.
[6] D.C. Perng, J.B. Yeh , K.C Hsu: "Grain Boundaries Stuffed Ru Film for Advanced Cu Diffusion Barrier". Proceedings of the Fifth International Symposium on Control of Semiconductor Interfaces (ISCSI) Tokyo, Japan, pp.173-176 , Nov 2007.
[7] E. Beyne, “3D System Integration Technologies” in Proceedings of the International Symposium on VLSI Technology, Systems and Applications, Hsinchu, Taiwan, pp. 19–27, April 2006 .
[8] H. Yonemuraa, S. Natsukob, J. Suyamab, S. Yamadaa, “Orientation and organization of gold nanorods on a substrate using a strong magnetic field: Effect of aspect ratio” J. Photochemistry and Photobiology , vol 220, pp. 179–187, 2011.
[9] H.Y. Song, Y.H. Choi . “ Effect of time-varying axial magnetic field on high aspect ratio contact hole etching” Thin Solid Films , vol 435 , pp.247–251 2003.
[10] R. Martin, H. Finlay “ Enhanced deposition of high aspect ratio aerosols in small airway bifurcations using magnetic field alignment” Aerosol Science ,vol 39 , pp. 679-690 , 2008.
[11] A. Furuya, S. Hirano, “Target magnetic-field effects on deposition rate in rf magnetron sputtering” J. Appl. Phys. ,vol 68, pp. 304-311, 1990.
[12] Y.J. Kim , Kyung S. Shin, S. H. , Choi, G. Han, “High deposition rate microcrystalline silicon films prepared by magnetic Mirror assisted RF-PECVD” Current Applied Physics, vol 10, pp.354–356, 2010.
[13] W. Makoto Nakamura, H. Matsuzaki, H. Sato, Y. Kawashima, “ High rate deposition of highly stable a-Si:H films using multi-hollow discharges for thin films solar cells” Surface & Coatings Technology , vol 205, pp.241–245, 2010.
[14] T. Goto , T. Matsuoka,T. Ohmi. “ Rotation magnet sputtering: Damage-free novel magnetron sputtering using rotating helical magnet with very high target utilization“ Journal of Vacuum Science & Technology ,vol 27, pp. 653-659, 2009 .
[15] T. Takahashi, N. ikeda , M. nao “ Improvement of toroidal plasma (tp) type sfwering for depositing co-cr fims on plasma-free sbstrates“ IEEE transactions on magnetics, vol 26 , pp. 1611-1613 ,1990.
[16] K. Ichihara, K. Tateyama, R. Sakai, T. Ishigami “ Composition Change in
Magnetron-Sputtered Fe–Zr–N Film with Erosion of Fe–Zr Alloy Target “ IEEE transactions on magnetics, vol 33, pp. 4449-4453,1997 .
[17] A. Furuya, S. Hirano “Target magnetic-field effects on deposition rate in rf magnetron sputtering“ J. Appl. Phys. ,vol 68, pp. 304-311, 1990.
[18] N. I-Ienis, A. Torrado and J. M. Bmndkrfin “ Magnetic Design of a Cathodic Arc and Sputtering Polyvalent Source for Vapour Deposition “IEEE Transactions On Magnetics, vol. 30, pp. 4683-4685, 1994.
[19] P. J Martin,., “ Filtered Arc Evaporation,” Surface. Coating. Technology, vol 9, pp. 51-58, 1993.
[20] N. N Iosad, et al , “Reactive Magnetron Sputter-Deposition of NbN and (Nb,Ti)N Films Related to Sputtering Source Characterization and Optimization,” J. Vac. Sci. Technol., vol. 19, pp.1840-1845, 2001.
[21] M. Kashiwagi, S. Ido, “ Computational analyses of a magnetron sputtering system with a ferrromagnetic target” J. Vac. Sci. Technol , vol. 53 , pp. 33-36 ,1999 .
[22] Sakai Natsukob, Junichi Suyamab, Sunao Yamadaa, Hiroaki Yonemuraa,“Orientation and organization of gold nanorods on a substrate using a strong magnetic field: Effect of aspect ratio” J. Photochemistry and Photobiology A: Chemistry ,vol 220, pp. 179–187 ,2011.
[23] H.i Matsuzaki et al, “ High rate deposition of highly stable a-Si:H films using multi-hollow discharges for thin films solar cells” Surface & Coatings Technology ,vol 205, pp. 241–245,2010.
[24] John L. Voseen ,Werner Kern , Glow Discharge Processes, John Wiley & Sons, 1980.
[25] M. Shao, C. N. Feng , R. G. Bohn, , “RF Sputtered CdS/CdTe Solar Cells: Effects of Magnetic Field, RF Power, Target Morphology, and Substrate Temperature,” First WCPEC, Hawaii , pp 111-114, May 1994.
[26] P. L. Dimitris , J. E Demetre , “Two-Dimensional Simulation of Polysilicon Etching with Chlorine in a High Density Plasma Reactor,” IEEE Trans. on Plasma Sci., vol 23, pp. 573-580, 1995.
[27] N. G Elistratov, K. A Titov, A. M Zimin, “Investigation of Low Pressure Discharge Generated by Magnetron Plasma Device,” IEEE XVIIth International Symposium on Discharges and Electrical Insulation in Vacuum, Berkeley,, pp. 707-711,1996.
[28] C. Engström , T. Berlind, J. Birch, L. Hultman, I. P. Ivanov, S. R.Kirkpatrick, “Design, Plasma Studies, and Ion Assisted Thin Film Growth in an Unbalanced Dual Target Magnetron Sputtering System with a Solenoid Coil,” J. Vac. Sci. Technol, vol 56 , pp. 107-113, 2000.
[29] Da Zhang, Phillip J. Stout, and Peter L. G. Ventzek , “ Plasma and process characterization of high power magnetron physical Vapor “ J. Vac. Sci. Technol ,vol . 21,2002 , pp. 265-273.
[30] 葉家豪, “以流體式數值模擬直流磁控電將濺鍍系統之磁場影響, ” 國立中央大學機械系研究所碩士論文,2010.
[31] 韓嘉緯, “ 以射頻磁控濺鍍方式鍍製含氫微晶矽薄膜並探討其應用於薄膜太陽能電池之可能性 ”國立中央大學光電科學研究所碩士論文,2007 .
|