應用於氧氣還原反應之高效能鉑金陰極催化劑其製備、改質與鑑定

以作者查詢圖書館館藏

、以作者查詢臺灣博碩士

、以作者查詢全國書目

、勘誤回報

、線上人數：117

、訪客IP：18.221.55.135

姓名

劉丞偉(Chen-Wei Liu) 查詢紙本館藏

畢業系所

材料科學與工程研究所

論文名稱

應用於氧氣還原反應之高效能鉑金陰極催化劑其製備、改質與鑑定
(Preparation, Modification and Characterization of Highly Effective PtAu Catalyst for Oxygen Reduction Reaction)

相關論文

★ 高效能直接甲醇燃料電池陽極觸媒之製備、改質與鑑定研究	★ 金-白金陰極催化劑應用於氧氣還原反應之製備與鑑定：金合金化以及氧化鈰添加之提升效應
★ 利用熱處理改質引發表面偏析現象以增進鉑釕觸媒之甲醇氧化反應活性	★ 藉添加鈀鎳與鈀鈷合金觸媒提升氮化鋰的氫化性質
★ 鉑釕觸媒應用於乙醇氧化反應之結構與活性關係研究：錫的添加和氧化處理之提升效應	★ 硼氫化鋰脫氫性質之研究：以添加鈀氫氧化鎳觸媒提升其脫氫反應
★ 表面活性劑對硒化鎘及硒化鋅鎘奈米合金在高溫有機金屬製程中的效應	★ 鈀銅觸媒應用於鹼性溶液中之乙醇氧化反應其結構與活性關係研究
★ 鈀鈷添加物對於硼氫化鋰及鋰硼氮氫四元化合物脫氫性質之提升效應	★ 成長溫度及配位體比例對硒化鋅鎘量子點光學性質的效應
★ 製備、改質及鑑定高效能鈀鈷觸媒應用於陰極氧還原反應	★ 金屬(鈰、鈷、錫)氯化物和氧化物的添加對於硼氫化鋰脫氫性質之提升效應
★ 界面活性劑比例及沉澱現象對硒化鎘量子點光學性質的效應	★ 雙元鉑基合金奈米顆粒及奈米棒之製備及其應用於氧氣還原反應
★ 錳的添加對於鉑鈷觸媒氧氣還原活性提升效應	★ 鈀金鎳觸媒在鹼性乙醇氧化環境下結構與活性的關係

檔案

[Endnote RIS 格式]

[Bibtex 格式]

[相關文章]

[文章引用]

[完整記錄]

[館藏目錄]

[檢視]

[下載]

本電子論文使用權限為同意立即開放。
已達開放權限電子全文僅授權使用者為學術研究之目的，進行個人非營利性質之檢索、閱讀、列印。
請遵守中華民國著作權法之相關規定，切勿任意重製、散佈、改作、轉貼、播送，以免觸法。

摘要(中)

本研究目標為製備與改質高效能鉑金觸媒以應用於氧氣還原反應(oxygen reduction reaction, ORR)。改質的方法包含添加氧化鈰(CeO2)¬或二氧化鈦(TiO2)當做改質劑，在氫氣、氮氣或空氣氣氛中進行熱處理，以及製備具有核殼結構之一維奈米棒，利用上述方法調控鉑金觸媒之結構/表面組成，使其具有較高的催化活性。所製備觸媒之結構、形貌、表面物種、表面組成以及電催化活性分別使用X光繞射儀(X-ray diffraction, XRD)、高解析穿透式電子顯微鏡(high resolution transmission electron microscope, HRTEM)、程式溫控還原儀(temperature programmed reduction, TPR)/光電子能譜儀(X-ray photoelectron spectroscopy, XPS)/循環伏安法(cyclic voltammograms, CV)和旋轉盤電極(rotating disc electrode, RDE)來鑑定。
本研究共包含五個部分，第一部分為製備Pt/Au原子比為1且金屬負載量為10 wt %的碳載體鉑金(PtAu/C)觸媒，並添加15 wt % CeO2當作改質劑(PtAuCe)。接著將PtAuCe觸媒放置於520和620 K的氫氣下進行熱處理(H520和H620)。由實驗結果指出PtAuCe樣品具有Au 核/Pt 殼結構且表面物種為富Pt合金的型態，在氫氣熱處理之後，表面Pt和Au的氧化物被還原並伴隨著Au逐漸偏析至觸媒表面，造成表面零價Pt組成的提升。其中以H520的活性表現最佳。
第二部分中則將PtAuCe 觸媒在520、570和 620 K的高溫中進行氮氣熱處理(N520、N570和 N620)。。由PtAu系統的熱力學模型可得知，在高溫環境下會發生Au的表面偏析現像產生，但當加入CeO2改質後， CeO2會誘發Pt偏析至表面造成表面重組的現象發生。由實驗結果顯示，表面富含Pt或Au將使得ORR活性提升或劣化。
第三部份為製備金屬負載量46 wt % 的Pt90Au10/C 觸媒並以不同劑量的TiOx (x = 1, 3 和 7 wt %)改質。 (PtAuTi-1, PtAuTi-2 和 PtAuTi-3)。實驗結果顯示，在加速穩定度測試(accelerated durability test, ADT)後，PtAuTi-2和PtAuTi-3觸媒的ORR活性分別高於商用Pt/C觸媒2.7 和 1.9 倍，此提升乃由於次氧化物(suboxide)形成和強大的金屬(Pt)與支撐物(TiO2)間的交互作用力(strong metal–support interaction, SMSI) 以及適當的Pt/Au表面組成。
在第四部份則製備以TiO2C做支撐物並具有金屬負載量為35 wt %的Pt75Au25觸媒(PtAu/TiO2C)並以空氣或氫氣氣氛熱處理(PtAu/TiO2C(Air)和 PtAu/TiO2C(H2))，以期能提升ORR穩定性，。在ADT後，PtAu/TiO2C(Air) 觸媒，其ORR活性比商用Pt/C觸媒高3.0倍，此活性的提升是因其表面為富Pt的型態。
第五部分則成功地以濕式化學還原法製備金屬負載量45 wt % 且具有核殼結構的Pt75Au25/C 奈米棒觸媒，其ORR活性以及穩定度均優於商用材Pt/C，此乃由於一維奈米結構可助於ORR活性的提升，此外，這結果也顯示Au核/Pt殼奈米棒相較於表面富Au的PtAu殼奈米棒有較佳的ORR活性。

摘要(英)

In this study, the highly effective PtAu catalysts are prepared and promoted for oxygen reduction reaction (ORR). Several methods, including addition of modifier (ceria (CeO2) and titanium dioxides (TiO2)), post heat treatment (H2, N2 or air) and preparation of 1-dimesional (1-D) nanorods (NRs) with core/shell structure are used to synthesize PtAu/C catalysts with tunable structure/surface compositions and high catalytic activity. The basic comprehension on the correlation between structures, morphologies, surface species, surface compositions, and electrocatalytic activities of prepared catalysts are characterized by X-ray diffraction (XRD), high resolution transmission electron microscope (HRTEM), temperature programmed reduction (TPR)/X-ray photon spectroscopy (XPS)/cyclic voltammograms (CV), and rotating disc electrode (RDE) techniques, respectively.
The study is divided into five parts. In the first part, the 10 wt % of PtAu/C alloy catalysts with the Pt/Au ratio of 1:1 modified by CeO2 (denoted as PtAuCe) are prepared and then further treated at 520 and 620 K under H2 (denoted as H520 and H620). The as-reduced Pt50Au50/Ce15C (PtAuCe) sample has an Au core/Pt shell structure with a Pt-rich alloy surface (APt) species dominating on its surface. After heating in H2, reduction of Pt and Au oxides and surface segregation of Au occur, and thus the surface metallic Pt composition increases. As a result, H520 exhibits the best ORR activity.
In the second part, PtAuCe catalysts are treated at 520-620 K under N2 (denoted as N520, N570, and N620). The inherent surface segregation of Au of PtAu systems at high temperatures based on the thermodynamic models has been changed due to the CeO2 modification. CeO2-induced Pt surface segregation and surface reconstruction takes place. Consequently, the enhancement of Pt or Au surface composition causes the promotion or deterioration in ORR activity for heat-treated catalysts, respectively.
In the third part, the 46 wt % of Pt90Au10/C catalysts with 1, 3 and 7 wt % of TiOx addition, denoted as PtAuTi-1, PtAuTi-2 and PtAuTi-3, respectively) are prepared. After accelerated durability test (ADT), the ORR activity of PtAu/C catalysts of PtAuTi-2 and (PtAuTi-3 is 2.7 and 1.9 times higher than that of the commercial Pt/C, respectively. The enhancement of ORR activity is attributed to the suboxide formation, strong metal–support interaction (SMSI) between the metal oxides and the adjacent Pt atoms and moderate surface Pt/Au ratio.
In the fourth part, the 35 wt % of Pt75Au25 alloy catalysts supported on TiO2C are prepared for ORR (denoted as PtAu/TiO2C) and then treated at air or H2 atmosphere (denoted as PtAu/TiO2C(Air) and PtAu/TiO2C(H2), respectively) in order to enhance their durability. After ADT, the ORR activity of PtAu/TiO2C(Air) catalysts is 3 times higher than that of the commercial Pt/C. The enhancement of ORR activity is attributed to the surface enrichment of Pt.
In the fifth part, the 45 wt % Pt75Au25/C NRs with core/shell structure are prepared by a facile wet chemical reduction method successfully. The ORR activities and long-term durability of PtAu NRs are both better than that of commercial Pt/C nanoparticles. The promotional effect of the PtAu NRs may be attributed to the 1-D morphology, favorably enhancing the ORR activity. The results also suggests that the Au in the core part of the Pt shell NRs may show a better promotional effect on the ORR performance than the surface Au in the PtAu shell NRs.

關鍵字(中)

★ 鉑金催化劑
★ 氧化鈰
★ 二氧化鈦
★ 氧氣還原反應
★ 後熱處理
★ 奈米棒
★ 核殼結構
★ 加速穩定度測試
★ 電化學表面積

關鍵字(英)

★ PtAu
★ CeO2
★ TiO2
★ Oxygen reduction reaction
★ Post heat treatment
★ Nanorods
★ Core/shell structure
★ Accelerated durability test
★ Electrochemical surface area

論文目次

摘要 iv
Abstract vi
List of Figures xii
List of Tables xvii
Chapter 1 Introduction 1
1.1 Mechanism of oxygen reduction reaction (ORR) 2
1.2 Cathode catalysts in the PEMFCs 4
1.3 PtAu catalysts and their surface segregation 5
1.4 Cerium dioxide (CeO2) modifier 9
1.5 Titanium dioxide (TiO2) modifier 11
1.6 Post heat treatment 13
1.7 Nanostructured materials 16
1.8 Motivation in this study 18
Chapter 2 Experimental Section 19
2.1 Preparation and modification of PtAu/C catalysts 19
2.1.1 Preparation of Pt50Au50/C catalysts 19
2.1.2 Preparation of Pt50Au50/Ce15C catalysts 19
2.1.3 H2 heat treatment for Pt50Au50/Ce15C catalysts 21
2.1.4 N2 heat treatment for Pt50Au50/Ce15C catalysts 21
2.2 Preparation and modification of PtAu catalysts by addition of TiOx or TiO2C 23
2.2.1 Preparation of Pt90Au10TiOx/C catalysts 23
2.2.2 Heat treatment of Pt75Au25/TiO2C catalysts 23
2.3 Preparation of PtAu core/shell NRs 27
2.4 Characterization of catalysts 29
2.4.1 Inductively coupled plasma-atomic emission spectroscopy (ICP-AES) 29
2.4.2 Thermal gravimetric analysis (TGA) 29
2.4.3 X-ray diffraction (XRD) 29
2.4.4 High resolution transmission electron microscope (HRTEM) 31
2.4.5 Ultra high resolution scanning electron microscopy (UHR-SEM) 31
2.4.6 Temperature programmed reduction (TPR) 32
2.4.7 X-ray photoelectron spectroscopy (XPS) 32
2.4.8 Linear sweep voltammetry (LSV) 32
2.4.9 Cyclic voltammograms (CV) 34
2.4.10 Accelerated durability test (ADT) 34
Chapter 3 Results and Discussion 35
3.1 Promotion of CeO2-modified PtAu/C cathode catalysts for ORR by H2-induced surface segregation 35
3.1.1 TGA 35
3.1.2 XPS 35
3.1.3 XRD 41
3.1.4 HRTEM and EDS 41
3.1.5 LSV 44
3.1.6 TPR 44
3.1.7 Summary 49
3.2 Surface condition manipulation and ORR enhancement of PtAu/C catalysts synergistically modified by CeO2 addition and N2 treatment 51
3.2.1 XRD 51
3.2.2 XPS 53
3.2.3 TPR 60
3.2.4 HRTEM 60
3.2.5 CV results 63
3.2.6 EDS 63
3.2.7 LSV 66
3.2.8 Summary 71
3.3 Highly enhanced ORR activity and durability of TiOx modified PtAu/C electrocatalysts 72
3.3.1 TGA, EDS and ICP-AES results 72
3.3.2 XPS 72
3.3.3 XRD and HRTEM 75
3.3.4 LSV 78
3.3.5 ADT 80
3.3.6 Summary 80
3.4 Enhanced oxygen reduction activity and durability for titanium carbide modified PtAu/C electrocatalysts by synergistically post heat treatment 82
3.4.1 TGA and ICP-AES results 82
3.4.2 XPS 82
3.4.3 XRD and HRTEM 84
3.4.4 LSV 86
3.4.5 ADT 89
3.4.6 Summary 91
3.5 PtAu core/shell NRs: preparation and applications as electrocatalysts for fuel cells 92
3.5.1 TGA, EDS and ICP-AES results 92
3.5.2 HRTEM and UHR-SEM 92
3.5.3 XRD 97
3.5.4 CV 97
3.5.5 EDS 100
3.5.6 ECSA 102
3.5.7 LSV 102
3.5.8 ADT 106
3.5.9 Summary 108
Chapter 4 Conclusions 109
References 111
Appendix 118
Publications List 134

參考文獻

1. L. S. Sarma, C. H. Chen, S. M. S. Kumar, G. R. Wang, S. C. Yen, D. G. Liu, H. S. Sheu, K. L. Yu, M. T. Tang, J. F. Lee, C. Bock, K. H. Chen, B. J. Hwang, Langmuir 2007, 23, 5802.
2. T. R. Ralph, M. P. Hogarth, Platinum Metals Rev. 2002, 46, 3.
3. T. R. Ralph, M. P. Hogarth, Platinum Metals Rev. 2002, 46, 117.
4. T. R. Ralph, M. P. Hogarth, Platinum Metals Rev. 2002, 46, 146.
5. S. Zhou, G. S. Jackson, B. Eichhorn, Adv. Funct. Mater. 2007, 17, 3099.
6. O. M. Lovvik, S. M. Opalka, Surf. Sci. 2008, 602, 2840.
7. J. L. Fernandez, D. A. Walsh, A. J. Bard, J. Am. Chem. Soc. 2005, 127, 357.
8. J. K. Nørskov, J. Rossmeisl, A. Logadottir, L. Lindqvist, J. R. Kitchin, T. Bligaard, H. J. Jonsson, J. Phys. Chem. B 2004, 108, 17886.
9. E. Antolini, J. R. C. Salgado, E. R. Gonzalez, J. Electroanal. Chem. 2005, 580, 145.
10. V. R. Stamenkovic, B. S. Mun, M. Arenz, K. J. J. Mayrhofer, C. A. Lucas, G. Wang, P. N. Ross, N. M. Markovic, Nat. Mater. 2007, 6, 241.
11. X. Z. Yuan, H. Wang, PEM Fuel Cell Electrocatalysts and Catalyst Layer Fundamental and Application, Springer Lindon, 2008.
12. R. R. Adzic, Recent advances in the kinetics of oxygen reduction, New York: Wiley-VCH, 1998, 197.
13. J. Bockris, S. Khan, Phenomenological electrode kinetics. In: Surface electrochemistry: a molecular level approach, New York: Plenum Press, 1993, 211.
14. V. Stamenkovic, B. S. Mun, K. J. J. Mayrhofer, P. N. Ross, N. M. Markovic, J. Rossmeisl, J. Greeley, J. K. Nørskov, Angew. Chem. Int. ed. 2006, 118, 2963.
15. J. R. C. Salgado, E. Antolini, E. R. Gonzalez, J. Phys. Chem. B 2004, 108, 17767.
16. H. Yang, N. Lamy, C. Alonso-Vante, D. L. Akins, J. Electrochem. Soc. 2005, 152, A704.
17. M. H. Shao, T. Huang, P. Liu, J. Zhang, K. Sasaki, M. B. Vukmirovic, R. R. Adzic, Langmuir 2006, 22, 10409.
18. J. R. C. Salgado, E. Antolini, E. R. Gonzalez, Appl. Catal. B 2005, 57, 283.
19. J. Luo, P. N. Njoki, Y. Lin, L. Wang, C. Zhong, J. Electrochem. Commun. 2006, 8, 581.
20. J. Miomir, B. Vukmirovic, Y. Xu, M. Mavrikakis, R. R. Adzic, Angew. Chem. Int. Ed. 2005, 44, 2132.
21. A. U. Nilekar, M. Mavrikakis, Surf. Sci. 2008, 602, L89.
22. P. Hernandez-Fernandez, S. Rojas, P. Ocon, A. D. Frutos, J. M. Figueroa, P. Terreros, M. A. Pena, J. L. G. Fierro, J. Power Sources 2008, 177, 9.
23. P. Hernandez-Fernandez, S. Rojas, P. Ocon, J. L. Gomez de la Fuente, J. San-Fabian, J. Sanza, M. A. Pena, F. J. Garcıa-Garcıa, P. Terreros, J. L. G. Fierro, J. Phys. Chem. C 2007, 111, 2913.
24. J. Zhang, K. Sasaki, E. Sutter, R. R. Adzic, Science 2007, 315, 220.
25. C. W. Liu, Y. C. Wei, K. W. Wang, J. Colloid Interface Sci. 2009, 336, 654.
26. J. Wang, G. Yin, G. Wang, Z. Wang, Y. Gao, Electrochem. Commun. 2008, 10, 831.
27. G. C. Bond, Platinum Metals Rev. 2007, 51, 63.
28. S. V. Victor, M. Horia, Surf. Sci. 2007, 601, 5332.
29. A. J. Bard, R. Parsons, J. Jordan, Standard Potentials in Aqueous Solutions, Marcel Dekker: New York, 1985, 314.
30. Y. Liu, P. Wynblatt, Surf. Sci. 1993, 290, 335.
31. A. Vazquez, F. Pedraza, Appl. Surf. Sci. 1996, 99, 213.
32. K. W. Park, J. H. Choi, B. K. Kwon, S. A. Lee, Y. E. Sung, H. Y. Ha, S. A. Hong, H. Kim, A. Wieckowski, J. Phys. Chem. B 2002, 106, 1869.
33. P. Wynblatt, R. C. Ku, Surf. Sci. 1977, 65, 511.
34. L. Z. Mezey, J. Giber, J. Phys. C: Solid State Phys. 1983, 16, 5683.
35. Y. Ma and P. B. Balbuena, Surf. Sci. 2008, 602, 107.
36. H. B. Liu,U. Pal, J. A. Ascencio, J. Phys. Chem. C 2008, 112, 19173.
37. H. B. Yu, J. H. Kim, H. I. Lee, M. A. Scibioh, J. Lee, J. Han, S. P. Yoon, H. Y. Ha, J. Power Sources 2005, 140, 59.
38. K. W. Wang, S. Y. Huang, C. T. Yeh, J. Phys. Chem. C 2007, 111, 5096.
39. C. W. Liu, Y. C. Wei, K. W. Wang, Chem. Commun. 2010, 46, 2483.
40. Y. C. Wei, C. W. Liu, K. W. Wang, ChemPhysChem 2009, 10, 1230.
41. Y. C. Wei, C. W. Liu, K. W. Wang, ChemPhysChem 2010, 11, 3078.
42. C. W. Liu, Y. C. Wei, K. W. Wang, Electrochem. Commun. 2009, 11, 1362.
43. K. Huang, K. Sasaki, R. R. Adzic, Y. Xing, J. Mater. Chem. 2012, 22, 16824.
44. G. Liu, H. M. Zhang, Y. F. Zhai, Y. Zhang, D. Y. Xu, Z. G. Shao, Electrochem. Commun. 2007, 9, 135.
45. D. S. Kim, S. Y. Kwak, Appl. Catal. A: Gen. 2007, 323, 110.
46. S. Sathiyanarayanan, S. Syed Azim, G. Venkatachari, Electrochim. Acta 2007, 52, 2068.
47. J. Shim, C. R. Lee, H. K. Lee, J. S. Lee, E. J. Cairns, J. Power Sources 2001, 102, 172.
48. W. Q. Han, Y. Zhang, Appl. Phys. Lett. 2008, 92, 203117.
49. F. C. Walsh, R. G. A. Wills, Electrochim. Acta 2010, 55, 6342.
50. S. V. Mentus, Electrochim. Acta 2004, 50, 27.
51. X. Liu, J Chen, G. Liu, L. Zhang, H. Zhang, B. Yi, J. Power Sources 2010, 195, 4098.
52. A. Sarkar, A. V. Murugan and A. Manthiram, J. Phys. Chem. C 2008, 112, 12037.
53. X. Li, I. M. Hsing, Electrochim. Acta 2006, 52, 1358.
54. Y. C. Wei, C. W. Liu, W. J. Chang, K. W. Wang, J. Alloys Compd. 2011, 509, 535.
55. Z. Chen, M. Waje, W. Li, Y. Yan, Angew. Chem. Int. Ed. 2007, 46, 4060.
56. B. Lim, M. Jiang, P. H. C. Camargo, E. C. Cho, J. Tao, X. Lu, Y. Zhu, Y. Xia, Science 2009, 324, 1302.
57. C. Koenigsmann, W. P. Zhou, R. R. Adzic, E. Sutter, S. S. Wong, Nano Lett. 2010, 10, 2806.
58. M. T. M. Koper, Fuel cell catalysts, Ed. Wiley Interscience: Hoboken, 2009.
59. M. Subhramannia, V. K. Pillai, J. Mater. Chem. 2008, 18, 5858.
60. L. Cademartiri, G. A. Ozin, Adv. Mater. 2009, 21, 1013.
61. Y. Xia, P. Yang, Y. Sun, Y. Wu, B. Mayers, B. Gates, Y. Yin, F. Kim, H. Yan, Adv. Mater. 2003, 15, 353.
62. C. He, S. Desai, G. Brown, S. Bollepalli, Electrochem. Soc. Interface 2005, 14, 41.
63. Y. Shao, G. Yin, Y. Gao, J. Power Sources 2007, 171, 558.
64. C. Wang, M. Waje, X. Wang, J. M. Tang, R. C. Haddon, Y. Yan, Nano Lett. 2004, 4, 345.
65. J. K. Hyung, S. K. Yong, H. S. Min, M. C. Sung, C. Joungmo, W. H. George, B. K. Won, Electrochem. Commun. 2010, 12, 32.
66. V. M. Dhavale, S. M. Unni, H. N. Kagalwala, V. K. Pillai, S. Kurungot, Chem. Commun. 2011, 47, 3951.
67. S. L. Gojkovic, S. K. Zecevic, R. F. Savinell, J. Electrochem. Soc. 1998, 145, 3713.
68. E. Irissou, F. Laplante, S. Garbarino, M. Chaker, D. Guay, J. Phys. Chem. C 2010, 114, 2192.
69. H. R. Colon-Mercado, B. N. Popov, J. Power Source 2006, 155, 253.
70. A. Pozio, M. De Francesco, A. Cemmi, F. Cardellini, L. Giorgi, J. Power Sources 2002, 105, 13.
71. E. A. Ticianelli, J. G. Beery, S. Srinivasan, J. Appl. Electrochem. 1991, 21, 597.
72. E. Antolini, L. Giorgi, A. Pozio, E. Passalacqua, J. Power Source 1999, 77, 136.
73. L. Vitos, A. V. Rubana, H. L. Skrivera, J. Kollarb, Surf. Sci. 1998 411, 186.
74. S. Xiao, W. Hua, W. Luo, Y. Wu, X. Li, H. Deng, Eur. Phys. J. B 2006, 54, 479.
75. J. W. Guo, T. S. Zhao, J. Prabhuram, R. Chen, C. W. Wong, J. Power Sources 2006, 156, 345.
76. J. Zeng, J. Yang, J. Y. Lee, W. Zhou, J. Phys. Chem. B 2006, 110, 24606.
77. J. J. Choi, K. W. Park, I. S. Park, K. Kim, J. S. Lee, Y. E. Sung, J. Electrochem. Soc. 2006, 153, A1812.
78. S. Y. Huang, C. M. Chang, K. W. Wang, C. T. Yeh, ChemPhysChem 2007, 8, 1774.
79. S. Y. Huang, S. M. Chang, C. T. Yeh, J. Phys. Chem. B 2006, 110, 234.
80. K. W. Wang, C. T. Yeh, J. Colloid Interface Sci. 2008, 325, 203.
81. C. W. Chou, S. J. Chu, H. J. Chiang, C. T. Huang, C. J. Lee, S. R. Sheen, T. P. Perng, C. T. Yeh, J. Phys. Chem. B 2001, 105, 9113.
82. K. W. Wang, S. R. Chung, C. W. Liu, J. Phys. Chem. C 2008, 112, 10242.
83. W. Wang, Q. Huang, J. Liu, Z. Zou, M. Zhao, W. Vogel, H. Yang, J. Catal. 2009, 266, 156.
84. H. B. Liu, U. Pal, J. A. Ascencio, J. Phys. Chem. C 2008, 112, 19173.
85. Y. Ma, H. Zhang, H. Zhong, T. Xu, H. Jin, X. Geng, Catal. Commun. 2010, 11, 434.
86. L. Y. Mo, X. M. Zheng, C. T. Yeh, Chem. Commun. 2004, 12, 1426.
87. N. Kristian, X. Wang, Electrochem. Commun. 2008, 10, 12.
88. L. Jin, L. Wang, D. Mott, P. N. Njoki, T. Lin, T. He, Z. Xu, B. N. Wanjana, I. I. S. Lim, C. J. Zhong, Adv. Mater. 2008, 20, 4342.
89. J. Jiang, B. Yi, J. Electroanal. Chem. 2005, 577, 107.
90. Y. H. Shih, G. V. Sagar, S. D. Lin, J. Phys. Chem. C 2008, 112, 123.
91. H. Song, X. Qiu, F. Li, W. Zhu, L. Chen, Electrochem. Commun. 2007, 9, 1416.
92. W. Gopel, G. Rocker, R. Feierabend, Phys. Rev. B 1983, 28, 3427.
93. B. C. Beard, P. N. Ross, J. Electrochem. Soc. 1990, 137, 3368.
94. J. H. Choi, K. W. Park, I. S. Park, K. Kim, J. S. Lee, Y. E. Sung, J. Electrochem. Soc. 2006, 153, A1812.
95. C. W. Liu, Y. C. Wei, K. W. Wang, J. Phys. Chem. C 2011, 115, 8702.
96. S. Sun, F. Jaouen, J. P. Dodelet, Adv. Mater. 2008, 20, 3900.
97. J. Y. Chen, T. Herricks, M. Geissler, Y. N. Xia, J. Am. Chem. Soc. 2004, 126, 10854.
98. J. Chen, B. J. Wiley, Y. Xia, Langmuir 2007, 23, 4120.
99. T. Kijima, T. Yoshimura, M. Uota, T. Ikeda, D. Fujikawa, S. Mouri, Angew. Chem. Int. Ed. 2004, 43, 228.
100. E. P. Lee, Z. Peng, W. Chen, S. Chen, H. Yang, Y. Xia, ACS Nano 2008, 2, 2167.
101. S. Sun, G. Zhang, D. S. Geng, Y. Chen, M. N. Banis, R. Li, M. Cai, X. Sun, Chem. Eur. J. 2010, 16, 829.
102. J. D. Hoefelmeyer, K. Niesz, G. A. Somorjai, T. D. Tilley, Nano Lett. 2005, 5, 435.
103. A. Hamelin, J. Electroanal. Chem. 1996, 407, 1.
104. R. Woods, Electrochim. Acta 1971, 16, 655.
105. B. Brown, S. D. Wolter, B. R. Stoner, J. T. Glass, J. Electrochem. Soc. 2008, 155, B852.
106. W. Zhu, J. P. Zheng, R. Liang, B. Wang, C. Zhang, G. Au, E. J. Plichta, J. Electrochem. Soc. 2009, 156, B1099.
107. J. Wang, G. Yin, Y. Shao, S. Zhang, Z. Wang, Y. Gao, J. Power Sources 2007, 171, 331.

指導教授

王冠文(Kuan-Wen Wang)

審核日期

2013-7-4

推文