參考文獻 |
[1] 施敏,半導體元件物理與製作技術,第二版,國立交通大學,新竹市,2月 2007 年
[2] J.A. Robinsona, S.E. Mohneya, J.B. Boosb, B.P. Tinkhamb and B.R. Bennettb, " Pd/Pt/Au ohmic contact for AlSb/InAs0.7Sb0.3 heterostructures ", Solid-State Electronics, Vol. 50, Issue 3, pp. 429-432, March 2006
[3] R. Dormaier, Q. Zhang, B. Liu, Y. C. Chou, M. D. Lange, J. M. Yang, A. K. Oki, and S. E. Mohney, " Thermal stability of Pd/Pt/Au Ohmic contacts to InAlSb/InAs heterostructures for high electron mobility transistors ", J. Appl. Phys., Vol. 105, Issue 4 , pp.044505, February 2009
[4] E. Mairiaux, L. Desplanque, X. Wallart, and M. Zaknoune, " Improvement of Ohmic contacts to In0.65Ga0.35Sb using Mo refractory metal and surface preparation for 6.3 Å heterojunction bipolar transistors ", J. Vac. Sci. Technol B, Vol. 28, Issue 1, pp.17, January 2010
[5] N.S. Boltovets, R.V. Konakova, Ya.Ya. Kudryk, V.V. Milenin,V.F. Mitin, E.V. Mitin, O.S. Lytvyn, L.M. Kapitanchuk, " Ohmic contacts to Hall sensors based on n-InSb–GaAs(i) heterostructures ", Semiconductor Physics, Quantum Electronics & Optoelectronics, Vol. 9, pp. 58-60, November 2006
[6] Q. Zhang, R. Dormaier, S. Mohney, " Microstructural Investigation of Pd/Pt/Au and Pd/Ru/Au Ohmic Contacts to InAlSb/InAs Heterostructures for High Electron Mobility Transistors. ", Materials Science, Vol. 14, Suppl 2, pp. 458-459, August 2008
[7] Dormaier, R. Zhang, Q. Chou, Y.-C. Lange, M. D. Yang, J. M. Oki, A. Mohney, S. E., " Pd/Ru/Au Ohmic contacts to InAlSb/InAs heterostructures for high electron mobility transistors ", J. Vac. Sci. Technol B, Vol. 27 , Issue 5, pp. 2145-2152, September 2009
[8] H. H. BERGER, " Models For Contacts To Planar Devices ", Solid-Stare Electronics., Vol. 15, pp. 145-158, June 1972
[9] Dieter K. Schroder, Semiconductor material and device characterization, John Wiley and Sons, 2006
[10] 林麗娟, X光繞射原理及其應用, 工業材料86期, 2月 83年
[11] 林明彥, 張嘉升和黎文龍, 原子力顯微儀的原理, 科儀新知第二十七卷第二期,10月94年
[12] Keh-Ching Huang, David B. Janes, Kevin J. Webb, and Michael R. Melloch, " A Transfer Length Model for Contact Resistance of Two-Layer Systems with Arbitrary Interlayer Coupling Under the contact ", IEEE Transactions On Electron Devices, Vol. 43, No. 5, May 1996
[13]王中宇, 溫坤禮,葛樂矣, 測量誤差分析與數據處理, 初版, 五南, 臺北市, 2008
[14] Philip R. Bevington, D. Keith Robinson, Data reduction and error analysis for the physical sciences, 3rd, McGraw-Hill, Boston, 2003
[15] John R. Taylor., An introduction to error analysis : the study of uncertainties in physical measurements, 2nd , University Science Books, Sausalito, Calif., 1997
[16] Herbert Ipser and Klaus W. Richter, " Ni, Pd, or Pt as Contact Materials for GaSb and InSb Semiconductors: Phase Diagrams ", Journal of ELECTRONIC MATERIALS, Vol. 32, No. 11, April 2003
[17] H.S. Liu, C.L. Liu, C. Wang, Z.P. Jin and K. Ishida, " Thermodynamic Modeling of the Au-In-Sb Ternary System ", Journal of ELECTRONICMATERIALS, Vol. 32, No. 2, Setember 2003
[18] D. Mockel,W . Rossler and F. Baumann, " Electrical Resistivity of Amorphous Sb Films and Sb-Au Films ", Phys. Stat. Sol. (a), Vol.49, pp.103, September 1978
[19] S. Ruvimov, Z. Liliental Weber, J. Washburn, K.J. Duxstad, E.E. Haller, Z.F. Fan, S.N. Mohammed, W. Kim, A.-E. Botchkarev, and H. Morkoc, " Microstructure of Ti/Aland Ti/Al/Ni/Au Ohmic contacts for n‐GaN ", Appl. Phys. Lett., Vol.69, pp.1556, 1996
[20] K. Ishidaa, T. Shumiya, a, H. Ohtania, M. Hasebeb and T. Nishizawa, "Phase diagram of the Al-In-Sb system ", Journal of the Less Common Metals, Vol. 143, Issues 1-2, pp. 279-289, October 1988
[21] H. Gotoh, K. Sasamotso, K. Uroda, and M. Kimata, " Molecular Beam Epitaxy of AlSb on GaAs and GaSb on AlSb Films ", Phys. Stat. Sol. (a), Vol. 76, pp.641, 1983
[22] Monika M. Bienera, b, Juergen Bienerc, 1, Richard Schalekc and Cynthia M. Friend, " Surface alloying of immiscible metals: Mo on Au(1 1 1) studied by STM ", Surface Science, Vol. 594, Issues 1-3, 1, pp. 221-23, December 2005
[23] X L Li, G Ouyang and G W Yang, " Surface alloying at the nanoscale: Mo on Au nanocrystalline films ", Nanotechnology, Vol.19, pp.505303, 2008
[24] Z. Bukowski, D. Badurski, J. St pie -Damm and R. Tro, " Single crystal growth and superconductivity of Mo3Sb7 ", Solid State Communications, Vol. 123, Issues 6-7, pp. 283-286, August 2002
[25] W. E. Liu and S. E. Mohney, " Condensed phase equilibria in transition metal–In–Sb systems and predictions for thermally stable contacts to InSb ", Materials Science and Engineering B, Vol. 103, Issue 2, pp. 189-201, October 2003
[26] D. Manasijevića, D. Minićb, D. Živkovića, J. Vřešt’álc, A. Aljiljib, N. Talijand, J. Stajić-Trošićd, S. Marjanovića and R. Todoroviće, " Experimental investigation and thermodynamic calculation of the Cu–In–Sb phase diagram ", Calphad, Vol. 33, Issue 1, pp. 221-226, March 2009
[27] C.S. Hsu, H.Y. Hsieh and J.S. Fang, " Enhancement of Oxidation Resistance and Electrical Properties of Indium-Doped Copper Thin Films ", Journal of Electronic Materials, Vol. 37, No 6, pp.852-859, 2008
[28] Tao Sui, Jing Feng Li, Song Zhe Jin, " Joining CoSb3 to Metal Surface of FGM Electrode for Thermoelectric Modules by SPS ", Key Engineering Materials, Vol. 368-372, pp. 1858-1861, February 2008
[29] Watts, John F., An introduction to surface analysis by XPS and AES, 1st, J. Wiley, New York, 2003.
[30] Paul L. Rossiter, The electrical resistivity of metals and alloys, Cambridge University Press, 2003
[31] John Penn and Edward Miller, " Electrical resistivity and Seebeck coefficients of CoSb and NiSb ", J. Appl. Phys., Vol. 44, pp.177, 1973
[32] Y. H. Tseng, M. S. Yeh, and T. H. Chuang, " Interfacial reactions between liquid indium and nickel substrate ", Journal of Electronic Materials, Vol. 28, No. 2, pp. 105-108, 1999
[33] Z. Marinkovic and V. Simic, " Room Temperature Interactions in Ni/Metal Thin Film Couples ", Thin Solid Films, Vol. 98, pp. 95-100, 1982
[34] Yennai Wang, Junhong Chi, Karan Banerjee, Detlev Grützmacher, Thomas Schäpers and Jia G. Lu, " Field effect transistor based on single crystalline InSb nanowire ", J. Mater. Chem., Vol. 21, pp. 2459-2462, December 2010
[35] S. Nazira, S. Auluckb, J.J. Pulikkotila, N. Singha and U. Schwingenschlögla, " First-principles comparison of the cubic and tetragonal phases of Mo3Sb7 ", Chemical Physics Letters, Vol. 504, Issues 4-6,pp. 148-152, March 2011
[36] G. Bergmann, " Hall-resistivity of amorphous ferromagnetic Ni-Au-alloys ", Zeitschrift für Physik B Condensed Matter, Vol. 25, Number 3, pp.255-258, 1976
[37] Xiao Yiyonga and Li Qiao, " A study of InSb---NiSb magnetoresistance material ", Sensors and Actuators A: Physical, Vol. 35, Issue 3, pp. 273-277, February 1993
[38] Takamaro Kikkawa, Hidemitsu Aoki, Eiji Ikawa, and John M. Drynan, " A Quarter-Micrometer Interconnection Technology Using a TiN/ AlSiCu/ TiN/ AlSiCu/ TiN/Ti Multilayer Structure ", IEEE Transactions On Electron Devices, Vol. 40, No. 2, February 1993
[39] Wen-Kuan Yeha, Mao-Chieh Chena, Pei-Jan Wangb, Lu-Min Liub and Mou-Shiung Linb, " Thermal stability of AlSiCu/W/n+p diodes with and without TiN barrier layer ", Thin Solid Films, Vol. 270, Issues 1-2, pp. 526-530, 1 December 1995
|