一協同設計專案團隊組成方法- 以安全監視器產品為例

以作者查詢圖書館館藏

、以作者查詢臺灣博碩士

、以作者查詢全國書目

、勘誤回報

、線上人數：51

、訪客IP：3.133.141.201

姓名

黃禎泉(Chen Chuan) 查詢紙本館藏

畢業系所

工業管理研究所在職專班

論文名稱

一協同設計專案團隊組成方法- 以安全監視器產品為例
(A method for organizing the collaborative design team - a case of security camera product)

相關論文

★ 應用MFM 與PPM 監控協同設計之執行流程	★ 應用DSM與DRFT於汽車電子之協同開發流程
★ 應用認知工程開發全球化光纖通訊系統	★ 羽絨產業策略規劃-應用品質機能展開分析法
★ 重電業協同專案管理績效之研究-以變電所統包工程為例	★ 以屬性導向新產品開發之流程塑模與分析– 以醫療器材產業為案例
★ 以品質機能展開法應用於主管管理職能之建構	★ 應用參考模型以及流程建模改善供應鏈績效-以投影機產業為例
★ 協同產品開發之流程管理 - 以汽車零件為例	★ 配電系統之高壓電纜接頭供應商評選
★ 應用品質機能展開於產品開發之流程分析-以刀鋒式伺服器為例	★ 實施精實六標準差改進製程良率－以機頂盒表面黏著技術為例
★ 太陽能模組產業之決策營運研究	★ 新產品開發階段導入替代料之流程建模及潛在風險分析
★ 應用實驗設計研發PET複合膜及改善厚膜翹曲問題	★ 應用先期產品品質規劃系統開發新產品-以工業電腦為例

檔案

[Endnote RIS 格式]

[Bibtex 格式]

[相關文章]

[文章引用]

[完整記錄]

[館藏目錄]

至系統瀏覽論文 ( 永不開放)

摘要(中)

全球化時代來臨，使得任何產品都必須面臨高度競爭，尤其電子化產品必須接受市場產品壽命考驗，所以必須要有好的協同設計專案團隊，才能以最佳時機、最佳時間、最佳價格達到顧客手裡，因此在本論文中使用認知工作方法(CWA; Cognitive Work Analysis)來分析，並以供應鏈操作參考模式(SCOR; Supply-Chain Operations Reference model)、設計鏈操作參考模式(DCOR; Design-Chain Operations Reference model)論述，建構一個協同設計專案團隊，加速企業獲利能力提昇。
本論文藉由A公司技術移轉B地生產中心，來運用認知工作分析 (CWA)，分析安全監視器產品供應鏈關係後，提供策略、組織、使用者資源與價值分析。將使目標、資料、工作、作業流程、資訊、優先次序等能更清楚而快速達成決策及目標。

摘要(英)

Global marketing business models are coming; all products will face the high competition. Especially, all electronic products have their product life cycle, which must accept the market challenge, so must organizing the collaborative design team. Supporting customer are the best opportunity, best time, optimum price. So use Cognitive Work Analysis (CWA) method to analyze in this thesis, and describe Supply-Chain Operations Reference model (SCOR), Design-Chain Operations Reference model (DCOR), build and construct one of collaborative design teams improved the enterprise’’s benefit and capacity.
Using Cognitive Work Analysis CWA analyzed the CCTV camera products supply chain, organization, resource and value analysis. This thesis applies one company created collaborative design team project. Goal, materials, work flows, and information can have the best priority and decision. Clearly reach decision and goal fast.

關鍵字(中)

★ 認知工作方法分析
★ 協同產品設計

關鍵字(英)

★ New product development
★ Collaborative product development
★ Cognitive work analysis

論文目次

中文提要 …………………………………………………… i
Abstract …………………………………………………… ii
Acknowledgement …………………………………………………… iii
Table of Contents …………………………………………………… iv
List of Figures …………………………………………………… v
List of Tables …………………………………………………… vi
Chapter I Introduction……………………………………… 1
1.1 Background Overview…………………………… 1
1.2 Motivation………………………………………… 1
1.2.1 Enterprise competitive phase for Consumer Electronics Production…………………………… 1
1.2.2 Problem statement………………………………… 2
1.2.3 Create the integrated information system for design chain & supply chain……………………………… 3
1.2.4 Reasons to Use CWA……………………………… 4
1.3 Research Objectives……………………………… 5
1.4 Thesis Organization……………………………… 6
Chapter II Literature Review………………………………… 7
2.1 New Product Development Content……………… 7
2.1.1 Value Stream Analysis Applied to the Product development Process……………………………8
2.1.2 Life cycle cost analysis………………………… 9
2.2 Design Chain Operations Reference Model & Supply-Chain Operations………………………… 12
2.2.1 Introduction to DCOR…………………………… 12
2.2.2 Introduction to SCOR…………………………… 14
2.2.3 Introduction to CCOR…………………………… 17
2.3 Integrated Information system……………………18
2.3.1 Information sharing and Product Data Management 19
2.3.2 Collaborative PLM system………………………… 21
2.3.3 MES system, ERP system EDI system…………… 21
2.4 Introduction to Cognitive work analysis………… 23
2.5 Project Management……………………………… 25
2.6 Collaborative Design Process…………………… 26
2.7 Product modularization and supply chain design and coordination 28
Chapter III Overview of the Cognitive work analysis and Proposed Methodology…………………………… 29
3.1 Collaborative Design Chain……………………… 29
3.1.1 New Product Development Process……………… 30
3.2 Cognitive work analysis…………………………… 31
3.2.1 Work domain analysis…………………………… 32
3.2.2 Common and control for CWA…………………… 34
3.2.3 For complex systems using means-ends relation of CWA……………………………………………… 35
3.2.4 Training information systems for CWA………… 38
3.3 Process Modeling and Analysis…………………… 39
3.3.1 NDP in CWA Model……………………………… 39
3.3.2 A CWA-Based Technique for Team Design……… 40
3.3.3 CWA in production scheduling…………………… 41
Chapter IV Case study………………………………………… 42
4.1 Introduce the CCTV cameras Industry manufacture 42
4.1.1 Introduce a case of Security Camera Production Company . ………………………………………… 45
4.1.2 Analyzing to make the enterprise profits 46
4.2 Design a team for collaborative…………………… 49
4.2.1 Collaborative manufacturing and design process for security camera product Production……………… 52
4.2.2 Implement related methodology in CCTV camera Industrial for information system sharing………… 56
Chapter V Conclusions……………………………………… 60
Reference ……………………………………………………

參考文獻

Reference:
Bralla, J. G. (1996). Design for Excellence. New York: McGraw-Hill. pp 127-148, pp 255-266, pp165-181
Bill Edwards. (2001), “R&D / Conceptual Design Phase Cost and Schedule”, Lawrence Berkeley National Lab.
Ernst, R. and Kamrad, B. (2000), “Theory and methodology: evaluation of supply chain structures through modularization and postponement”, European Journal of Operational Research, Vol. 124, pp. 495-510.
Farrokh, Mistree, Janet K. Allen, David W., Rosen, Suresh K., Sitaraman, Marie C. Thursby, Jye-Chyi (JC) Lu. (2005), “A Framework for Agile Collaboration in Engineering ”.
Frank, Stegherr. (2006) “Control the Uncertainties of Demand and Supply Using the SCOR Model.” Supply Chain Council – Taiwan.
Hanna Bahemia, Brian Squire, (2007),“Integrating Knowledge Management into New Product Development”, The Chartered institute of purchasing & supply, Manchester business school.
Hunsche, C. H. (2005). Introducing the design-chain: Does design really chain?
PCOR.com, http://www.pcor.com (2006/10/20).
McManus, Hugh, L. and Richaed, L., Millard. (2002), “Value Stream Analysis and Mapping for Product Development” –Toronto Canada Massachusetts Institute of Technology
Kamal, S. Z., Karandikar, H. M, Mistree, F. and Muster, D. (1987), “Knowledge Representation for Discipline-Independent Decision Making”, Expert Systems inComputer-Aided Design (Gero J., Ed.), Elsevier Science Publishers B.V., Amsterdam, pp. 289-321.
Kinsley, A. M. (1994). “Application of ecological interface design to advanced manufacturing: Revised dissertation proposal.”, Unpublished report, Center for Cognitive Science, State University of New York, Buffalo.
Kim, Ki-Chan. (2002), “Customization effects of e-supply chain design with reference to the B2B at the automobile industry”. - http://www.gerpisa.univ-evry.fr
Kuric, I. and Debnár R. (1998), “Computer support system ware”, P10- 12.
Lee, Hau L. and Whang, Seungjin. (2001), November. “E-Business and Supply Chain Integration” , Stanford Global Supply Chain Management Forum.
Lintern, G. (2003). “Work Domain Analysis: Tutorial”, General Dynamics, Dayton, Ohio.
Moira, Chin. and Penelope, Sanderson. (1999), “Cognitive Work Analysis of Command and Control Work Domain”, Marcus Watson.
Mohammad Alam. (2003), “Product Life Cycle Design”, Development of Modular Products-Autumn”.
Naikar, N., Moylan A. and Pearce, B. (2006), “Analyzing activity in complex systems with cognitive work analysis”, Theoretical Issues in Ergonomics Science Vol. 7, No. 4, July–August 2006, 371–394 concepts, guidelines and case study for control task analysis
Naikar, N., Pearce, B., Drumm, D. and Sanderson, P.M. (2003), “Designing Teams for First-of-a-Kind, Complex Systems Using the Initial Phases of Cognitive Work Analysis: Case Study”, Human Factors, 2003-Summer, 202-217
Naikar, N., Gavan Lintern, Simon Goss, Neil A., Ernst, Greg A., Jamieson John Mylopoulos. (2002), “Integrating requirements engineering and cognitive work analysis: A case study ”.
Oppl, S. and Stary C. (2005), “Towards Human-Centered Design of Diagrammatic Representation Schemes, In Proceedings of the 4th International Workshop, on Task Models and Diagrams for User Interfaced Design”, Gdansk, Poland.
Ou-Yang, C. and Jiang, T. A. (2002), “Developing an Integration Framework to Support the Information Flow Between PDM and MRP”, International J Adv Manuf Technol Springer-Verlag, London Limited.
Pahl, G. and Beitz, W. (1996), “Engineering Design - A Systematic Approach, 2nd edition, London: Springer”. pp. 340-349
Peter, G. Higgins. (1998), “Extending Cognitive Work Analysis to Manufacturing Scheduling”, OzCHI’98, Adelaide, November 30-December 4, 1998, pp. 236-243
Richard, C. Linger., Howard, F. Lipson., John McHugh., Nancy R. Mead. and Carol A. (1999), “Use of cognitive work analysis across the system life cycle: from requirements to decommissioning”, Proceedings of the 43rd Annual Meeting of the Human Factors and Ergonomics Society.
Sanderson, P. (1998), “Cognitive Work Analysis and the Analysis, Design, and Evaluation of Human-Computer Interactive Systems”, Proceedings of OzCH198, Adelaide, South Australia .IEEE Computer Society Press.
Sanchez, R. and Mahoney, J.T. (1996), “Modularity, flexibility, and knowledge management are in product and organization design”, Strategic Management Journal, Vol. 17, pp. 63-76.
Scott Stephens. (2006), “Supply Chain Operations (SCOR) Reference Model and the Integrated Business Reference Framework”, http://www.supply-chain.org
Seepersad, C.C., M. G. Fernández, J. H. Panchal, H. Choi, J. K. Allen, D. L.McDowell, and F. Mistree, (2004), “Foundations for a Systems-Based Approach for Materials Design”, 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Albany, New York. Paper Number: AIAA-2004-4300.
Shinichiro Hori*, Kim J. Vicente, Yujiro Shimizu, and Isao Takami, (2001), “Putting cognitive work analysis to work in industry practice: integration with ISO13407 on human centered design”, Mitsubishi Heavy Industries, Ltd. Proceedings of the Human Factors and ergonomics society 45th annual– meeting.
Sledge. (2002) , “Life-Cycle Models for Survivable Systems” . That was created in the performance of Federal Government Contract Number F19628-00-C-0003 with Carnegie Mellon University by Carnegie Mellon University
Thomas, Phelps. (2006), “SCOR and Benefits of Using Process Reference Models”, Supply Chain International Conference –12th January, Taipei
Tim, McLaren., Milena, Head. and Yufei Yuan. (2002), “Supply chain collaboration alternatives: understanding the expected costs and benefits”, Electronic Networking Applications and Policy Volume 12, Number 4.
Womack, J. , Jones, E. , and Roos, D. (1992), “The Machine That Changed the World”. Harper Perennial.
Vicente, K. J. (1999), “Cognitive Work Analysis: Towards safe, productive, and healthy computer-based work.” Mahweh, NJ: LEA.
Vicente, K. J., & Rasmussen, J. (1992), “Ecological Interface Design: Theoretical foundations”, IEEE Transactions on Systems, Man, and Cybernetics, SMC-22, 589-606.
Virdzek, P. et al.: (2005).Progressive. “Progressive Methods in Design and their Application in Engineering Industry”, Received - Primljeno: Accepted - Prihvaćeno: 2005-10-20.Review Paper - Pregledni rad.
Younghwan, Choi., Kim, Kwangsoo. and Kim, Cheolhan. (2004),“A Design Chain Collaboration Framework Using Reference Models”, http://home.postech.ac.kr
Yu, Eric S. (1997), “Towards modeling and reasoning support for early-phase requirements engineering”. In International Symposium on Requirements Engineering, pages 226–235, Annapolis, Maryland.

指導教授

高信培(Hsing-Pei Kao)

審核日期

2008-7-9

推文