參考文獻 |
[1] Ayre, R. S., and Jacobsen, L. S., “Transverse Vibration of a Two-Span Beam Under Action of s Moving Alternating Force,” Applied Mechanics Division, Vol. 50, pp. 283-290, (1950).
[2] Ayre, R. S., Ford, G.., and Jacobsen, L. S., “Transverse Vibration of a Two-Span Beam Under Action of a Moving Constant Force,” Applied Mechanics Division, No. 49, pp. 1-12, (1950).
[3] Ting, E. C., Genin J., and Ginsberg J. H., “A General Algorithm for Moving Mass Problems,” Journal of Sound and Vibration, Vol. 33, pp. 49-58, (1974).
[4] Richardson, H. H., and Wormley, D. N., “Transportation Vehicle Beam - Elevated Guieway Dynamic Interactions - a State-of-the-Art Review,” Journal of Dynamic Systems, Measurement, and Control, Vol. 96, pp. 169-179,(1974).
[5] Sridharan, N., and Mallik, A. K., “Numerical Anlysis of Vibration of Beams Subjected to Moving Loads,” Journal of Sound and Vibration, Vol. 65, pp. 147-150, (1979).
[6] Zibdeh, H. S., “Stochastic Vibration of an Elastic Beam due to Random Moving Loads and Deterministic Axial Forces,” Engineering Structures, Vol. 17, pp. 530-535, (1995).
[7] Yang, Y. B., and Lin, B. H., “Vehicle-Bridge Interaction Analysis by Dynamic Condensation Method,” Journal of Structural Engineering, Vol. 121, pp. 1636-1643, (1995).
[8] Theodorakopoulos, D. D., Chassiakos, A. P., and Beskos, D.E., “Dynamic Effects of Moving Load on a Poroelastic Soil Medium by an Approximate Method,” International Journal of Solids and Structures, Vol. 41, pp. 1801-1822, (2004).
[9] MartInez-Castro, A. E., Museros, P., and Castillo-Linares, A., “Semi-Analytic Solution in the Time Domain for Non-uniform Multi-Span Bernoulli–Euler Beams Traversed by Moving Loads,” Journal of Sound and Vibration, Vol. 294, pp. 278-297, (2006).
[10] Filho, F. V., “Dynamic Influence Lines of Beams and Frames,” Journal of the Structural Division, Vol.50, pp. 371-386, (1996).
[11] Wu, J. S., and Dai, C. W., “Dynamic Responses of Multi-Span Nonuniform Beam due to Moving Loads,” Journal of Structural Engineering, Vol. 113, pp. 458-74, (1987).
[12] Wu, J. S., Lee, M. L., and Lai, T. S., “The Dynamic Analysis of a Flat Plate under a Moving Load by the Finite Element Method,” International Journal for Numerical Method in Engineering, Vol. 24, pp. 743-762, (1987).
[13] Olsson, M., “On the Fundamental Moving Load Problem,” Journal of Sound and Vibration, Vol. 145, pp. 299-307, (1991).
[14] Wu, J. J., Whirttaker, A. R., and Cartmell, M. P., “The Use of Finite Element Techniques for Calculating the Dynamic Response of Structures to Moving Loads,” Computers and Structures, Vol. 78, pp. 789-799, (2000).
[15] Cai, Y., Chen, S. S., Rote, D. M., and Coffey, H. T., “Vehicle /Guideway Interaction for High Speed Vehicles on a Flexible Guideway,” Journal of Sound and Vibration, Vol. 175, pp. 625-646, (1994).
[16] Tiago, C. M., and Leitao, V. M. A., “Development of a EFG Formulation for Damage Analysis of Reinforced Concrete Beams,” Computers and Structures, Vol. 82, pp. 1503-1511, (2004)
[17] Law, S. S. Chan, T. H. T., and Zeng, Q. H., “Moving Force Identification - a Time Domain Method,” Journal of Sound and Vibration, Vol. 201, pp. 1-22, (1997).
[18] Chang, T. P., and Liu, Y. N., “Dynamic Finite Element Analysis of a Nonlinear Beam subjected to a Moving Load,” International Journal of Solids and Structures, Vol. 33, pp. 1673-1688, (1996).
[19] Bhashyam, G.. R., and Prathap, G., “Galerkin Finite Element Method for Non-Linear Beam Vibrations,” Journal of Sound and Vibration, Vol. 72, pp. 191-203, (1980).
[20] Hino, J., Yoshimura, T., and Konishi, K., “A Finite Method Prediction of the Vibration of a Bridge Subjected to a Moving Vehicle Load,” Journal of Sound and Vibration, Vol. 96, pp. 45-53,(1984).
[21] Hino, J., Yoshimura, T., and Ananthanarayana, N., “Vibration Analysis of Non-Linear Beams Subjected to a Moving Load Using the Finite Element Method,” Journal of Sound and Vibration, Vol. 100, pp. 477-491, (1985).
[22] Timoshenko, S. P., On the Forced Vibrations of Bridges, Phil. Mag., London, England ; (1922).
[23] Steele, C. R., “The Finite Beam with a Moving Load,” Journal of Applied Mechanics, ASME, Vol. 34, pp. 111-118, (1967).
[24] Lin, Y. H., “Comments on ‘Dynamic Response of a Beam with Intermediate Point Constraints Subject to a Moving Load,” Journal of Sound and Vibration, Vol. 180, pp. 809-812, (1995).
[25] Fryba, L., Vibration of Solids and Structures under Moving Loads, Groningen, The Netherlands: Noordhoff International Publishing; (1971).
[26] Wu, J. J., “Dynamic Analysis of a Rectangular Plate under a Moving Line Load using Scale Beams and Scaling Laws,” Computers and Structures, Vol. 83, pp. 1646-1658, (2005).
[27] Lee, S. Y., and Yhim, S. S., “Dynamic Analysis of Composite Plates Subjected to Multi-moving Loads Based on a Third Order Theory,” International Journal for Numerical Method in Engineering, Vol. 41, pp 4457-4472, (2004)
[28] Yang, Y. B., Yau, J. D., and Hsu, L. C., “Vibration of Simple Beams due to Trains Moving at High Speeds,” Engineering Structures, Vol. 19, pp. 936-944, (1997).
[29] Yang, Y. B., Lin, C. L., Yau, J. D., and Chang, D. W., “Mechanism of Resonance and Cancellation for Train-Induced Vibrations on Bridges with Elastic Bearings,” Journal of Sound and Vibration, Vol.269, pp. 345-360, (2004).
[30] Yau, J. D., and Yang, Y. B., “Vertical Accelerations of Simple Beams due to Successive Loads Traveling at Resonant Apeeds,” Journal of Sound and Vibration, Vol. 289, pp. 210-228, (2006)
[31] Gbadeyan, J. A., and Oni, S. T., “Dynamic Behaviour of Beams and Rectangular Plates under Moving Loads,” Journal of Sound and Vibration, Vol. 71, pp. 566-584, (1995).
[32] Henchi, K., Fafard, M., Dhatt G., and Talbot, M., “Dynamic Behavior of Multi-Span Beams under Moving Loads,” Journal of Sound and Vibrations, Vol. 199, pp. 33-50, (1997).
[33] Zhu, X. Q., and Law, S. S., “Precise Time-Step Integration for the Dymanic Response of a Continuous Beam under Moving Loads,” Journal of Sound and Vibration, Vol. 240, pp.962-970, (2001).
[34] Lee, H. P., “Dynamic Response of a Beam with Intermediate Point Constraints Subject to a Moving Load,” Journal of Sound and Vibration, Vol. 171,pp. 361-368, (1994).
[35] Lee, H. P., “Dynamic Response of a Multi-Span Beam on One-Sided Point Constraints Subject to a Moving Load ,” Computers and Structures, Vol. 55, pp. 615-623, (1995).
[36] Dugush, Y. A., and Eisenberger, M., “Vibrations of Non-Uniform Continuous Beams under Moving Loads,” Journal of Sound and Vibration, Vol. 254, pp. 911-926, (2005).
[37] Wang, R. T., and Lin, J. S., “Vibration of Multi-Span Timoshenko Frames due to Moving Loads,” Journal of Sound and Vibration, Vol. 212, pp. 417-434, (1998).
[38] Wang, R. T., and Lin, T. Y., “Random Vibration of Multi-Span Timoshenko beam due to a Moving Load,” Journal of Sound and Vibration, Vol. 213, pp. 127-138, (1998).
[39] Mackertich, S., “Moving Load on a Timoshenko Beam,” The Journal of the Acoustical Society of America, Vol. 88, pp. 1175-1178, (1990).
[40] Li, J., and Su, L., “The Resonant Vibration for a Simply Supported Girder Bridge under High-Speed Trains,” Journal of Sound and Vibration, Vol. 224, pp. 897-915, (1999).
[41] Mahmoud, M. A., “Stress Intensity Factors for Single and Double Edge Cracks in a Simple Beam subject to a Moving Load,” International Journal of Solids and Structures, Vol. 111, pp 151-161, (2001).
[42] Stanisic M. S., and Hardin C. H., “On the Response of Beams to an Arbitrary Number of Concentrated Moving Masses,” Journal of The Franklin Institute, Vol. 287, No. 2, pp. 115-123, (1969).
[43] Ichikawa M., Miyakawa Y., and Matsuda A., “Vibration Analysis of The Continuous Beam Subjected to a Moving Mass,” Journal of Sound and Vibration, Vol. 230, No. 3, pp. 493-506, (2000).
[44] Akin J. E., and Mofid M., “Numerical Solution for Response of Beams with Moving Mass,” Journal of Structure Engineering, Vol. 115, No. 1, pp. 120-131, (1989).
[45] Cifuentes A. O., “Dynamic Response of a Beam Excited by a Moving Mass,” Finite Elements in Analysis and Design, Vol. 5, pp. 237-246, (1989).
[46] Lin, Y. H., and Trethewey, M. W., “Finite Element Analysis of Elastic Beams Subjected to Moving Dynamic Loads,” Journal of Sound and Vibrations, Vol. 136, pp 323-342, (1990).
[47] Lin, Y. H., Trethewey, M. W., Reed, H. M., Shawley, J. D., and Sager, S. J., “Dynamic Modeling and Analysis of a High-Speed Precision Drilling Machine,” Journal of Vibration and Acoustics, Vol. 112, pp 355-365, (1990).
[48] Wu J. J., Whittaker A. R., and Cartmall M. P., “Dynamic Responses of Structures to Moving Bodies Using Combined Finite Element and Analytical Methods,” International Journal of Mechanical Sciences, Vol. 43, pp. 2555-2579, (2001).
[49] Wu J. J., “Dynamic Responses of a Three-Dimensional Framework Due to a Moving Carriage Hoisting a Swinging Object,” Int. J. Numer. Meth. Engng, Vol. 59, pp. 1679-1702, (2004).
[50] Lee H. P., “Dynamic Response of a Beam with a Moving Mass,” Journal of Sound and Vibration, Vol. 191, No. 2, pp. 289-294, (1996).
[51] Lee H. P., “Transverse Vibration of a Timoshenko Beam Acted on by an Accelerating Mass,” Applied Acoustics, Vol. 47, No. 4, pp. 319-330, (1996).
[52] Mofid M., and Shadnam M., “On The Response of Beams with Internal Hinges, under Moving Mass,” Advances in Engineering Software, Vol. 31, pp. 323-328, (2000).
[53] Vu-Quoc L., and Olsson M., “A Computational Procedure for Interaction of High-Speed Vehicles on Flexible Structures Without Assuming Known Vehicle Nominal Motion,” Computer Methods in Applied Mechanics and Engineering, Vol. 76, pp. 207-244, (1989).
[54] Vu-Quoc L., and Olsson M., “Formulation of Basic Building Block Model for Interaction of High Speed Vehicles on Flexible Structures,” Journal of Applied Mechanics, Vol. 56, pp. 451-458, (1989).
[55] Xu X., Xu W., and Genin J., “A Non-Linear Moving Mass Problen,” Journal of Sound and Vibration, Vol. 204, No. 3, pp. 495-504, (1997).
[56] Wayou A. N., Tchoukuegno R., and Woafo P., “Non-Linear Dynamics of an Elastic Beam under Moving Loads,” Journal of Sound and Vibration, Vol. 273, pp. 1101-1108, (2004).
[57] Blejwas T. E., Feng C. C., and Ayre R. S., “Dynamic Interaction of Moving Vehicles and Structures,” Journal of Sound and Vibration, Vol. 67, No 4, pp. 513-521, (1979).
[58] Schneider H. J., Elf H. P., and Kolle P., “Modeling of Travelling-Loads and Time-Dependent Masses with Adina,” Computer and Structure, Vol. 17, No. 5-6, pp. 749-755, (1983).
[59] Delgado R. M., and Santos S. M., “Modelling of Railway Bridge-Vehicle Interaction on High Speed Tracks,” Computers and Structures, Vol. 63, No. 3, pp. 511-523, (1997).
[60] Wu J. J., “Dynamic Analysis of an Inclined Beam Due to Moving Loads,” Journal of Sound and Vibration, Vol. 288, pp. 107-131, (2005).
[61] Mahmoud M. A., Zaid M. A. A., “Dynamic Response of a Beam with a Crack Subject to a Moving Mass,” Journal of Sound and Vibration, Vol. 256, No. 4, pp. 591-603, (2002).
[62] Sung Y. G.., “Modelling and Control with Piezoactuators for a Simply Supported Beam under a Moving Mass,” Journal of Sound and Vibration, Vol. 250, No. 4, pp. 617-626, (2002).
[63] Esmailzadeh E., and Ghorashi M., “Vibration Analysis of a Timoshenko Beam Subjected to a Travelling Mass,” Journal of Sound and Vibration, Vol. 199, No. 4, pp. 615-628, (1997).
[64] Rieker J. R., and Yertheway M. W., “Finite Element Analysis of an Elastic Beam Structure Subjected to a Moving Distributed Mass Train,” Mechanical Systems and Signal Processing, Vol. 13, No. 1, pp. 31-51, (1999).
[65] Wu J. J., “Vibration Analyses of a Portal Frame under The Action of a Moving Distributed Mass Using Moving Mass Element,” Int. J. Numer. Meth. Engng (in press), (2005).
[66] Delgado R. M., and Santos S. M., “Modelling of Railway Bridge-Vehicle Interaction on High Speed Tracks,” Computers and Structures, Vol. 63, No. 3, pp. 511-523, (1997).
[67] Yang Y. B., Wu C. M., and Yau J. D., “Dynamic Responses of a Horizontally Curved Beam Subjected to Vertical and Horizontally Moving Loads,” Journal of Sound and Vibration, Vol. 242, No. 3, pp. 519-537, (2001).
[68] Yang, F., and Fonder, G. A., “An Iteration Solution Method for Dynamic Response of Bridge -Vehicles Systems,” Earthquake Engineering and Structural Dynamics, Vol. 25, pp. 195-215, (1996).
[69] Yang, Y. B., and Yau, J. D., “Vehicle-Bridge Interaction Element for Dynamic Analysis,” Journal of Structural Engineering, ASCE, Vol. 121, No. 11, pp. 1512-1518, (1997).
[70] Yang Y. B., Chang C. H., and Yau J. D., “An Element for Analysing Vehicle-Bridge Systems Considering Vehicle's Pitching Effect,” Int. J. Numer. Meth. Engng. Vol. 46, pp. 1031-1047, (1999).
[71] Michaltsos, G., Sophianopoulos, D. and Kounadis, A. N., “The Effect of a Moving Mass and other Parameters on the Dynamic Response of a Simply Supported Beam,” Journal of Sound and Vibration, Vol. 191, No. 3, pp. 246-251, (1996).
[72] Olsson M., “Finite Element, Model Co-Ordinate Analysis of Structures Subjected to Moving Loads,” Journal of Sound and Vibration, Vol. 99, No. 1, pp. 1-12, (1985).
[73] Yanabe M., Yamada Y., and Wakui H., “Modal Method for Interaction of Train and Bridge,” Computer and Structure, Vol. 27, No. 1, pp. 119-127, (1987).
[74] Wu J. J., and Whittaker A. R., “The Natural Frequencies and Mode Shapes of a Uniform Cantilever Beam with Multiple Two-Dof Spring–Mass Systems,” Journal of Sound and Vibration, Vol. 227, No. 2, pp. 361-381, (1999).
[75] Wu J. J., “Study on The Inertia Effect of Helical Spring of The Absorber on Suppressing The Dynamic Responses of a Beam Subjected to a Moving Load,” Journal of Sound and Vibration, Vol. 297, pp. 981-999, (2006).
[76] Wu J. J., “Free Vibration Analysis of Beams Carrying a Number of Two-Degree-of-Freedom Spring-Damper-Mass Systems,” Finite Elements in Analysis and Design, Vol. 40, pp. 363-381, (2004).
[77] Wu J. J., “Use of Equivalent-Damper Method for Free Vibration Analysis of a Beam Carrying Multiple Two Degree-of-Freedom Spring–Damper–Mass Systems,” Journal of Sound and Vibration, Vol. 281, pp. 275-293, (2005).
[78] Hino J., Yoshimura T., and Ananthanarayana N., “Vibration Analysis of a Non-Linear Beam Subjected to Moving Loads by Using The Galerkin Method,” Journal of Sound and Vibration, Vol. 104, No. 2, pp. 179-186, (1986).
[79] Yoshimura T., Hino J., Kamata T., and Ananthanarayana N. “Random Vibration of a Non-Linear Beam Subjected to a Moving Load: A Finite Element Method Analysis,” Computer and Structure, pp. 317-329, (1988).
[80] Genin, J.,Ting, E. C. and Vafa, Z., “Curve Bridge Response to a Moving Vehicle,” Journal of Sound and Vibration, Vol. 81, pp. 469-475, (1982).
[81] Chang, T. P., and Liu, Y. N., “Dynamic Finite Element Analysis of a Nonlinear Beam subjected to a Moving Load,” International Journal of Solids and Structures, Vol. 33, pp 1673-1688, (1996).
[82] Chompooming K., and Yener M., “The Influence of Roadway Surface Irregularities and Vehicle Deceleration on Bridge Dynamics Using The Method of Lnes, “Journal of Sound and Vibration, Vol. 183, No. 4, pp. 567-589, (1995).
[83] Law S. S., and Zhu X. Q., “Bridge Dynamic Responses Due to Road Surface Roughness and Braking of Vehicle,” Journal of Sound and Vibration, Vol. 282, pp. 805-830, (2005).
[84] Chu R. B., Garg V. K., and Dhar C, L., “Railway-Bridge Impact: Simplified Train and Bridge Model,” Railway-Bridge Impact, pp. 1823-1844, (1979).
[85] Gupta R. K., and Traill-Nash R. W., “Bridge Dynamic Loading Due to Road Surface Irregularities and Braking of Vehicle,” Earthquake Engineering and Structural Dynamics, Vol. 8, pp. 83-96, (1980).
[86] Huang D. and Wang, T. L., “Vibration of highway steel bridges with longitudinal grades,” Computers and Structures, Vol. 69, pp. 235-245, (1998).
[87] Abdel-Rohman M., and Al-Duaij J., “Dynamic Response of Hinged-Hinged Single Span Bridges with Uneven Deck,” Computers and Structures, Vol. 59, No. 2, pp. 291-299, (1996).
[88] Au F. T. K., Wang J. J., and Cheung Y. K., “Impact Study of Cable-Stayed Bridge under Railway Traffic Using Various Models,” Journal of Sound and Vibration, Vol. 240, No. 3, pp. 447-465, (2001).
[89] Yau J. D., and Yang Y. B., “Vibration Reduction for Cable-Stayed Bridges Traveled by High-Speed Trains,” Finite Elements in Analysis and Design, Vol. 40, pp. 341-359, (2004).
[90] Yang Y. B., Lee T. Y., and Tsai I. C., “Response of Multi-Degree-of-Freedom Structures with Sliding Supports,” Earthquake Engineering and Structural Dynamics, Vol. 19, pp. 739-752, (1990).
[91] Nielsen J. C. O., and Abrahamsson T. J. S., “Coupling of Physical and Modal Components for Analysis of Moving Non-Linear Dynamic Systems on General Beam Structures,” International Journal for Numerical Methods in Engineering, Vol. 33, pp. 1843-1859, (1992).
[92] Hwang E. S., and Nowak A. S., “Simulation of Dynamic Load for Bridges,” Journal of Structure Engineering, Vol. 117, No. 5, pp. 1413-1434, (1991).
[93] Zhang Q. L., Vrouwenvelder A., and Wardenier J., “Dynamic Amplification Factors and EUDL of Bridges under Random Traffic Flows,” Engineering Structures, Vol. 23, pp. 663-672, (2001).
[94] Wu J. J., “Free Vibration Characteristics of a Rectangular Plate Carrying Multiple Three-Degree-of-Freedom Spring–Mass Systems Using Equivalent Mass Method,” International Journal of Solids and Structures, Vol. 43, pp. 727-746, (2006).
[95] Mulcahy N. L., “Bridge Response with Tractor-Trailer Vehicle Loading,” Earthquake Engineering and Structural Dynamics, Vol. 11, pp. 649-665, (1983).
[96] Taheri M. R., and Ting E. C., “Dynamic Response of Plate to Moving Loads: Structural Impedance Method,” Computer and Structure, and 1379-1393, (1989).
[97] Taheri M. R., and Ting E. C., “Dynamic Response of Plates to Moving Loads: Finite Element Method,” Computer and Structure, Vol. 34, No. 3, pp. 509-521, (1990).
[98] Cheung Y. K., Au F. T. K., Zheng D. Y., and Cheng Y. S., “Vibration of Multi-Span Non-Uniform Bridges under Moving Vehicles and Trains by Using Modified Beam Vibration Functions,” Journal of Sound and Vibration, Vol. 228, No. 3, pp. 611-628, (1999).
[99] Zhu X. Q., and Law S. S., “Practical Aspects in Moving Load Identification,” Journal of Sound and Vibration, Vol. 258, No. 1, pp. 123-146, (2002).
[100] Wu J. J., “Use of Effective Stiffness Matrix for The Free Vibration Analyses of a Non-Uniform Cantilever Beam Carrying Multiple Two Degree-of-Freedom Spring–Damper–Mass Systems,” Computers and Structures, Vol. 81, pp. 2319-2330, (2003).
[101] Yang Y. B., and Wu Y. S., “A Versatile Element for Analyzing Vehicle–Bridge Interaction Response,” Engineering Structures, Vol. 23, pp. 452-469, (2001).
[102] Esmailzadeh E., and Jalili N., “Vehicle–Passenger–Structure Interaction of Uniform Bridges Traversed by Moving Vehicles,” Journal of Sound and Vibration, Vol. 260, pp. 611-635, (2003).
[103] Chatterjee P. K., Datta T. K., and Surana C. S., “Vibration of Continuous Bridges Under Moving Vehicles,” Journal of Sound and Vibration, Vol. 169, No. 5, pp. 619-632, (1994).
[104] Yang Y. B., Liao S. S., and Lin B. H., “Impact Formulas for Vehicles Moving Over Simple and Continuous Beams,” Journal of Structure Engineering, pp. 1646-1650, (1995).
[105] Kwon, H. C., Kim, M. C. and Lee, I. W., “Vibration control of bridges under moving loads,” Computers and Structures, Vol. 66, No. 4, pp. 473-480, (1998).
[106] Tan, G. H., Brameld, G. H. and Thambiratnam, D. P., “Development of an Analytical Model for Treating Bridge-Vehicle Interaction,” Engineering Structures, Vol. 20, pp. 54-61, (1998).
[107] Chan, T. H. T., Law, S. S., Yung, T. H. and Yuan X. R., “An Interpretive Method for Moving Force Identification,” Journal of Sound and Vibration, Vol. 219, No. 3, pp. 503-524, (1999).
[108] Chan, T. H. T., Yu, L. and Law, S. S., “Moving Force Identification Studies, I:Theory,” Journal of Sound and Vibration, Vol. 247, pp. 59-76, (2001).
[109] Chan, T. H. T., Law, S. S. and Yung, T. H., “Moving Force Identification Using an Existing Prestressed Concrete Bridge,” Engineering Structures, Vol. 22, pp. 1261-1279, (2001).
[110] Wang J. F., Lin C. C., and Chen B. L., “Vibration Suppression for High-Speed Railway Bridges Using Tuned Mass Dampers,” International Journal of Solids and Structures, Vol. 40, pp. 465-491, (2003).
[111] Ting, E. C., Shih, C., and Wang, Y. K., “Fundamentals of a vector form intrinsic finite element: Part I. basic procedure and a plane frame element,” Journal of Mechanics, Vol. 20, No. 2, pp. 113-122, (2004).
[112] Ting, E. C., Shih, C., and Wang, Y. K., “Fundamentals of a vector form intrinsic finite element: Part II. plane solid elements,” Journal of Mechanics, Vol. 20, No. 2, pp. 123-132, (2004).
[113] Shih, C., Wang, Y. K., and Ting, E. C., “Fundamentals of a vector form intrinsic finite element: Part III. Convected material frame and examples,” Journal of Mechanics, Vol. 20, No. 2, pp. 133-143, (2004).
[114] Wang, R. Z., Chuang, C. C., Wu, T.Y., and Wang, C.Y., “Vector form analysis of space truss structure in large elastic-plastic deformation,” Journal of the Chinese Institute of Civil Hydraulic Engineering, Vol. 17, No. 4, pp. 633-646, (2005).
[115] Wang, C. Y., Wang, R. Z., Chuang, C. C., and Wu, T. Y., “Nonlinear analysis of reticulated space truss structures,” Journal of Mechanics, Vol. 22, No. 3, pp. 199-212, (2006).
[116] Wang, C. Y., Wang, R. Z., Wu, T. Y., Ting, E. C., and Kang, L. C., “Nonlinear Discontinuous Deformation Analysis of Structure,” Proceedings of the Sixth International Conference on Analysis of Discontinuous Deformation (ICADD-6), Ming Lu , 79-91, A. A. Balkema Publishers, (2003).
[117] Wang, C. Y., Wang, R. Z., Kang, L. C., and Ting, E. C., “Elastic-Plastic Large Deformation Analysis of 2D Frame Structure,” 21st International Union of Theoretical and Applied Mechanics, IUTAM, August 15-21, Warsaw, Poland, (2004).
[118] Wu, T. Y., Wang, R. Z., and Wang, C. Y., “Large deflection analysis of flexible planar frames,” The Journal of the Chinese Institute of Engineers, Vol. 29, No. 4,593-606, (2006).
[119] 王仁佐、康龍全、吳東岳、王仲宇、丁承先,「二維剛架結構之彈塑性大變形分析」,第27屆全國力學會議,台灣,(2003)。
[120] 王仁佐、康龍全、吳思穎、王仲宇,「管路揮擊問題之模擬與分析」,結構工程,第二十卷,第四期,第120-143頁,台灣,(2005)。
[121] 王仁佐、吳俊霖、林柏州、楊元森、蔡克銓,「向量式有限元之RC數值模擬分析」, 第30屆全國力學會議,台灣,(2006)。
[122] 王仁佐,「向量式結構運動分析」,國立中央大學土木工程學研究所博士論文,台灣,(2005)。
[123] 王仁佐、康龍全、王仲宇、吳東岳,「三維桁架向量式有限元」,中華民國第七屆結構工程研討會,(2004)。
[124] 陳彥樺、王仁佐、王仲宇、陳銘鴻,「橋梁結構移動荷載模擬方法」,清雲土木工程研討會,(2006)。
[125] 王仁佐、吳東岳、王仲宇、蕭輔沛,「向量式空間剛架大變形分析」,中華民國第八屆結構工程研討會,(2006)。
[126] 王仁佐、陳彥樺、陳世凱、王仲宇,「向量式有限元之移動荷載模擬方法」 第30屆力學研討會,(2006)。
[127] 王仲宇,王仁佐、「空間剛架大變形分析」,2006海峽兩岸工程力學研討會,台灣,(2006)。
[128] Wang, R. Z., Wang, C. Y., and Tsai, K. C., “Vector form intrinsic finite element method of the failure and collapse of space frame under seismic,” The Eighth Taiwan-Korea-Japan Joint Seminar on Earthquake Engineering for Building Structures, SEEBUS 2006, Nagoya, Japan, December 4-5, (2006).
[129] 王仲宇、王仁佐、陳彥樺、莊清鏘,「移動荷載與質量作用下之平面剛架非線性動力分析」,第四屆海峽兩岸結構與大地工程學術研討會,浙江,杭州,(2007)。
[130] Clough, R. W., and Penzien, J., Dynamics of Structures, New York, McGraw-Hill; (1993).
[131] 陳明聖,「高速列車行經連續橋之車橋反應分析」,國立中央大學土木工程學研究所碩士論文,台灣,(2001)。
[132] Raid, K., Response of Cable Stayed and Suspension Bridges to Moving Vehicles Analysis methods and practical modeling techniques, Sweden, TRITA,-BKN. Bulletin; (1998). |