參考文獻 |
第一章
1. G.F. Benedict, Nontraditional manufacturing processes, Marcel Dekker, New York, 1987.
2. E.J. Weller, Nontraditional manufacturing processes, Publish by the Society of Manufacturing Engineers, Dearborn, Michigan, U.S.A, 1983.
3. L.C. Lim, L.C. Lee, Y.S. Wong, H.H. Lu, Solidification microstructure of electrodischarge machined surfaces of tool Steels, Materials Science and Technology, Vol.7, pp.239-248, 1991.
4. L.C. Lee, L.C. Lim, V. Narayanan, V.C. Venkatesh, Quantification of surface damage of tool steels after EDM, International Journal of Machine Tools and Manufacture, Vol.28. No.4, pp.359-372, 1988.
5. S.M. Pandit, K.P. Rajurkar, Crater geometry and volume form electro-discharge machined surface profiles by data dependent systems, Journal of Engineering for Industry, Vol.102, pp.289-295, 1980.
6. K.P. Rajurkar, S.M. Pandit, Quantitative expressions for some aspects of surface integrity of electro-discharge machined components, Journal of Engineering for Industry, Vol.106, pp.171-177, 1984.
7. P.C. Pandey, S.T. Jilani, Plasma channel growth and the resolidified layer in EDM, Precision Engineering, Vol.8, No.2, pp.104-109, 1986.
8. T. Tsutsui, T. Tamura, Effect of the electro-discharge machined surface on the mechanical properties-on the surface defect and transverse rupture strength of cemented carbide-, Bull. Japan Society of Precision Engineering Vol.20 No.1 pp.60-61, 1986.
9. T. Tsutsui, T. Tamura, Effect of the electro-discharge machined surface on the mechanical properties-on the fatigue strength of cemented carbide-, Bull. Japan Society of Precision Engineering, Vol.21, No.1, pp70-71, 1987.
10. A.G. Mamalis, G.C. Vosniakos, N.M. Vaxevanidis, Macroscopic and microscopic phenomena of electro-discharge machined steel surfaces: An experimental investigation, Journal of Mechanical Working Technology, Vol.15, pp.335-356, 1987.
11. Y.S. Wong, L.C. Lee, and L.C. Lee, EDM-induced surface defects on steel, ISEM-9, pp.263-266, 1989.
12. L.C. Lee, L.C. Lim, Y.S. Wong, H.H. Lu, Towards a better understanding of the surface features of Electro-discharge machined tool steels, Journal of Materials Processing Technology, Vol.24, pp.513-523, (1990).
13. M. Nakamura, I. Shigematsu, K. Kanayama, Y. Hirai, Surface damage in ZrB2-based composite ceramics induced by electro-discharge nachining, Journal of Materials Science, Vol. 26, pp.6078-6082, 1991.
14. J.E. Fuller, The EDM surface-topography, chemistry and metallurgy, SME Technical Paper, MS-91-484, 1991.
15. I. Ogata, Y. Mukoyama, Residual Stress on Machined by Wire Electric Discharge, International Journal of Japan Society Precision Engineering, Vol.25, No.4, pp.273-278, 1991.
16. K. Masui, T. Sone, Surface integrity and its improvement of EDM, Journal of the Japan Society of Precision Engineering, Vol.57, No.6, pp.945-948, 1991.
17. L.C. Lee, L.C. Lim, Y.S. Wong, Crack susceptibility of electro-discharge machined surfaces, Journal of Materials Processing Technology, Vol.29, pp.213-221, 1992.
18. Y. Yang, Y. Mukoyama, H. Kato, T. Hanaka, Analysis of crack generative region in crater machined by impulsive electrical discharge, 精密工學會誌, Vol.60, No.3, p388-392, 1994.
19. Y.S. Wong, L.C. Lee, L.C. Lim, Effects of flushing on electro-discharge machined surfaces, Journal of Materials Processing Technology, Vol. 48, pp.299-305, 1995.
20. H.E. Bruyn, Some aspects of the influence of gap flushing on the accuracy in finishing by spark erosion, Annals of the CRIP, Vol.18, pp.147-161, 1970.
21. M. Kuneida, T. Masuzawa, A fundamental study on a horizontal EDM, Annals of the CIRP, Vol.37, No.1, pp.187-190, 1988.
22. K.P. Rajurkar, G.F. Royo, Improvement in EDM performance by R.F. control and orbital motion, American Society of Mechanical Engineers, Vol. 34, pp.51-62, 1989.
23. M. Kunieda, S. Furuoya, Improvement of EDM efficiency by supplying oxygen gas into gap, Annals of the CIRP, Vol.40, pp.215-218, 1991.
24. V.S.R. Murti, P.K. Philip, An analysis of the debris in ultrasonic-assisted electrical discharge machining, Wear, 117, pp.241-250, 1987.
25. V.S.R. Murti, P.K. Philip, A comparative analysis of machining characteristics in ultrasonic assisted EDM by the response surface methodology, Int. J. Prod. Res., Vol.25, No.2, pp.259-272, 1987.
26. V.S.R. Murthy, P.K. Philip, Pulse train analysis in ultrasonic assisted EDM, International Journal of Machine Tools and Manufacture, Vol.27, No.24, pp.469-477, 1987.
27. D. Kremer, J.L. Lebrun, B. Hosari, A, Moisan, Effect of ultrasonic vibrations on the performances in EDM, Annals of CIRP, Vol.38, No.1, pp.199-202, 1989.
28. S. Enache, C. Opran, G. Stoica, E. Strajescu, The study of EDM with forced vibration of tool-electrode, Annals of CIRP, Vol.39, No.1, pp.167-170, 1990.
29. D. Kremer, C. Lhiaubet, A, Moisan, A study of the effect of synchronizing ultrasonic vibrations with pulse in EDM, Annals of the CIRP, Vol.40, No.1, pp.211-214, 1991.
30. B.H. Yan, M.D. Chen, Effect of ultrasonic vibration on electrical discharge machining characteristic of Ti-6Al-4V alloy, Journal of Japan Institute of Light Metals, Vol.44, No.5, pp.281-285, 1993.
31. J. Zhixin, Z. Jianhua, A. Xing, Ultrasonic vibration pulse electro-discharge machining of holes in engineering ceramics, Journal of Materials Processing Technology, Vol.53, pp.811-816, 1995.
32. J. Zhixin, A. Xing, Z. Jianhua, Study on mechanical pulse electric discharge machining, Precision Engineering Vol.17 No.2, pp.89-94, 1995.
33. Y. Imai, A. Satake, A. Taneda and K. Kobayashi, Improvement of EDM machining speed by using frequency response actuator, International Journal of Electrical Machining, No.11, pp.21-26, 1996.
34. S.L. Chen, F.Y. Huang, Y. Suzuki, B.H. Yan, Improvement of material removal rate of Ti-6Al-4V alloy by electrical discharge machining with multiple ultrasonic vibration, Journal of Japan Institute of Light Metals, Vol.47 No.4, pp.220-225, 1997.
35. J. Zhinxin, Z. Jianhua and A. Xing, Study on a new kind of combined machining technology of ultrasonic machining and electrical discharge machining, International Journal of Machine Tools and Manufacture, Vol.37, No.2, pp.193-199, 1997.
36. Z.N. Guo, T.C. Lee, T.M. Yue and W.S. Lau, A study of ultrasonic-aided wire electrical discharge machining, Journal of Materials Processing Technology, 63, pp823-828, 1997.
37. J.H. Zhang, T.C. Lee, W.S. Lau, X. Ax, Spark erosion with ultrasonic frequency, Journal of Materials Processing Technology, 68 pp83-88, 1997.
38. B.H. Yan, and C.C. Wang, The machining characteristics of Al2O3/6061Al composite using rotary electro-discharge machining with a tube electrode", Journal of Materials Processing Technology, vol.195, pp.222-231, 1999.
39. B.H. Yan, C.C. Wang, W.D. Liu and F.Y. Huang, Machining characteristics of Al2O3/6061Al composite using rotary EDM with a disklike electrode", The International Journal of Advanced Manufacturing Technology, Vol.16, pp.322-333, 2000.
40. Y.C. Lin, B.H. Yan, Y.S. Chang, Machining characteristics of titanium alloy (Ti-6Al-4V) using combination process of EDM with USM, Journal of Materials Processing Technology, 104, pp.171-177, 2000.
41. P.E. Berghausen, H.D. Brettschneider, M. F. Davis, Electrodischarge machining program, The Cincinnati Milling Mc. Co. Final report ASD-TR-63-7-545, 1963.
42. A.N. Merkur'ev, Media for dimensional electroerosion of metals, Appl. Electrical Phenomena, No.1, pp15-29, 1965.
43. E.V. Kholodnov, Precision electric-spark machining of metals in a carbon-free medium, Appl. Electrical Phenomena, No.1, pp.30-37, 1965.
44. C.V. Osenbruggen, High-precision spark machining, Philips Technical Review, No.6, pp.195-208, 1969.
45. K.M. Teshima and T. Sata, Performance of working fluid in high speed EDM, pp.26-34, 1970.
46. T. Masuzawa and K. Tanuka, Water-based Dielectric Solution for EDM, Annals of the CIRP, Vol.32, No.1, pp.119-122, 1983.
47. K. Kagaya, Y. Oishi, K. Yada, Micro-electrodischarge machining using water as a working fluid-I: Micro-hole drilling, Precision Engineering, Vol.8, No.37, pp156-162, 1986.
48. W. Komig, L. Jorres, Aqueous solutions of organic compounds as dielectrics for EDM sinking, Annals of the CIRP, Vol.36, No.1, pp.105-109, 1987.
49. I. Ogata, Y. Mukoyama, Carburizing and Decarburizing Phenomena in EDM'd Surface, Int. J. Japan Soc. Pre. Eng. Vol.27, No.3, pp.197-202, 1993.
50. S.L. Chen, F.Y. Huang, Y. Suzuki and B.H. Yan, Electrical discharge machining characteristics of Ti-6Al-4V alloy using distilled water as a dielectric fluid, Journal of Japan Institute of Light Metals, Vol.47, No4, pp226-231, 1997.
51. S.L. Chan, B.H. Yan, F.Y. Huang, Influence of kerosene and distilled water as dielectric discharge machining characteristics of Ti-6Al-4V alloy, Journal of Materials Processing Technology, Vol.87, pp.107-111, 1999.
52. T. Takawshi, Study on the mirror surface machining by planetary EDM, International Symposium of Electro machining ISME-7, pp.137-147, 1983.
53. N. Mohri, N. Saito, T. Takawshi, K. Kobayashi, Mirro-Like finishing by EDM, International symposium on machine tool design and symposium, pp329-336, 1987.
54. N. Mohri, N. Saito, H. Ootake, T. Takawashi, K. Kobayashi, Finishing on the large area of work surface by EDM, Journal of Japan Society of Precision Engineering, Vol.53, No l, pp.124-130, 1987.
55. H. Narumiya, N. Mohri, N. Saito, H. Ootake, Y. Tsunekawa, T. Takawashi, K. Kobayashi, EDM by powder suspended working fluid, Proceedings of International symposium for Elcetro- Machining, The Japan Society of Electrical-Machining Engineers, pp.5-8, 1989.
56. N. Saito, N. Mohri, Improvement of machined surface roughness in large area EDM, Journal of the Japan Society of Precision Engineering, Vol.57, No.6, pp.954-958, 1991.
57. B.H. Yan, S.L Chen, Effect of dielectric with suspended aluminum powder on EDM, J. of the Chinese Society of Mechanical Engineers, Vol.14, No.3, pp.307-312, 1993.
58. B.H. Yan, S.L Chen, Characteristics of SKDII by complex process of electrical discharge machining using liquid suspended with aluminum powder, J. of Japan Inst. Metals, Vol.58, No.9, pp.1067-1072, 1994.
59. H.M. Chow, B.H. Yan, F.Y. Hung, Study of added powder in kerosene for the micro-slit machine of titanium alloy electro-discharge machining, Journal of Material Processing Technology, Vol.101, pp.95-103, 2000.
60. B.H. Yan, C.C. Wang, H.M. Chow, Y.C. Lin, Feasibility study of rotary electrical discharge machining with ball burnishing for Al2O3/6061Al composite, International Journal of Machine Tools and Manufacture - Design Research and Application v.40 n.10 pt.0 pp.1403-1422, 2000.
61. H. Narumiya, N. Mohri and M. Suzuki, Surface modification by EDM, Research and Technological Development in Nontraditional Machining, Proceedings of the Winter Annual Meeting of the ASME, Chicago, USA, Vol.34, pp.21-30, 1988.
62. A. Gangadhar, M.S. Shunmugam, P.K. Philip, Surface modification in electrodischarge processing with a powder compact tool electrode, Wear 143, p45-55, 1991.
63. N. Mohri, N. Saito, Y. Tsunekawa, Metal surface modification by electrical discharge machining with composite electrode, Annals of the CIRP, Vol.42, pp.219-222, 1993.
64. Q.Y. Ming, L.Y. He, Powder-suspension dielectric Fluid for EDM, J of Material Processing Technology, Vol.52, pp.44-54, 1995.
65. Y. Tsuekawa, M. Okumiya, N. Mohri and E. Kuribe, Formation of composite layer containing TiC precipitates by electrical discharge alloying, Materials Transactions, JIM Vol.38 No.7 (1997) pp.630-635
66. J.P. Kruth, In-process alloying of the white layer of a workpiece machine by die-sinking EDM, IJEM, Vol.3, pp.33-38, 1998.
67. P.J. Ross, Taguchi techniques for quality engineering, McGraw-Hill, New York, 1998.
68. G. Taguchi, Introduction to quality engineering, Asain Productivity Orgnization, Tokyo, 1990.
69. M.S. Phadke, Quality Engineering Using Robust Design, Prentice Hall, Englewood Cliffs, NJ, 1989.
70. Y.S. Liao, J.T. Huang, H.C. Su, A study on the machining-parameter optimization of wire electrical discharge machining, Journal of Materials Processing Technology, 71, pp.487-493, 1997.
第二章
1. L.C. Lim, L.C. Lee, Y.S. Wong, H.H. Lu, Solidification microstructure of electrodischarge machined surfaces of tool steels, Materials Science and Technology Vol.7, pp.239-248, 1991.
2. Ogata, Y. Mukoyama, Carburizing and decarburizing phenomena in EDM'd surface, Int. J. Japan Soc. Pre. Eng., Vol.27, No.3, pp.197-202, 1993.
3. B.H. Yan and S.L. Chen, Effect of dielectric with suspended aluminum powder on EDM, J. Chinese Society of Mechanical Engineers, pp.307-312, 1993.
4. B.H. Yan and S.L. Chen, Characteristics of SKD11 by complex process of electrical discharge machining using liquid suspended with aluminum powder, J. Japan Inst. Metals, Vol.58, No.9, pp.1067-1072, 1994.
5. H.M. Chow, B.H. Yan, F.Y. Hung, Study of added powder in kerosene for the micro-slit machine of titanium alloy electro-discharge machining, Journal of Material Processing Technology, Vol.101, pp.95-103, 2000.
6. Y. C. Lin, B. H. Yan, Y. S. Chang, Machining characteristics of titanium alloy (Ti-6Al-4V) using combination process of EDM with USM, Journal of Materials Processing Technology, 104, pp.171-177, 2000.
7. N. Mohri, N. Saito, T. Takawashi and T. Takawashi, Mirror-like finishing by EDM, Proceedings of the 25th International Symposium on Machine Tool Design and Symposium, UK, pp.329-336, 1985.
8. H. Narumiya, N. Mohri, N. Saito, H. Ohtake, T. Takawashi and K. Kobayashi, Finishing on the large area of work surface by EDM, J. Japan Society of Precision Engineering, Vol.53, No.1, pp.124-130, 1987.
9. H. Narumiya, N. Mohri and M. Suzuki, Surface modification by EDM, Research and technological development in nontraditional machining, Proceedings of the Winter Annual Meeting of the ASME, Chicago, USA, Vol.34, pp.21-30, 1988.
10. H. Narumiya, N. Mohri, N. Saito, H. Ohtake, Y. Tsunekawa, T. Takawashi and K. Kobayashi, EDM by powder suspended working fluid, Proceedings of International symposium for Electro-Machining, The Japan Society of Electrical-Machining Engineers, pp.5-8, 1989.
11. Y.F. Luo, Z.Y. Zhang and C.Y. Yu, Mirror surface EDM by electric field partially induced, Annals of the CIRP, Vol.34, pp.179-181, 1988.
12. Y.S. Wong, L.C. Lim and W.M. Tee, Near-mirror-finish phenomenon in EDM using powder-mixed, Journal of Material Processing Technology, Vol.79, pp.30-40, 1998.
13. Q.Y. Ming, L.Y. He, Powder-suspension dielectric Fluid for EDM, J of Material Processing Technology, Vol.52, pp.44-54, 1995.
14. J.P. Kruth, In-process alloying of the white layer of a workpiece machine by die-sinking EDM, IJEM., Vol.3, pp.33-38, 1998.
15. A. Gangadhar, M.S. Shunmugam, P.K. Philip, Surface modification in electrodischarge processing with a powder compact tool electrode, Wear 143 (1991), p45-55.
16. N. Mohri, N. Saito, Y. Tsunekawa, Metal surface modification by electrical discharge machining with composite electrode, Annals of the CIRP Vol.42/1/1993, pp.219-222.
17. Y. Tsunekawa, M. Okumiya, N. Mohri and E. Kuribe, Formation of composite layer containing TiC precipitates by electrical discharge alloying, Materials Transactions, JIM Vol.38 No.7, pp.630-635, 1997.
18. Metal Handbook, (1) Vol.2, p.728 and Vol.3, p.389; (2) Vol.3, p.361; (3) Vol.3, p.357, 9th edition, 1980 ASM.
19. L.C. Lee, L.C. Lim, Y.S. Wong, Crack susceptibility of electro-discharge machined surfaces, Journal of Materials Processing Technology, Vol.29, pp.213-221, 1992.
20. L.C. Lee, L.C. Lim, V. Narayanan, V.C. Venkatesh, Quantification of surface damage of tool steels after EDM, International Journal of Machine Tools and Manufacture, Vol.28, No.4 pp.359-372, 1988.
21. L.C. Lee, L.C. Lim, Y.S. Wong, H.H. Lu, Towards a better understanding of the surface features of Electro-discharge machined tool steels, Journal of Materials Processing Technology, Vol.24, pp.513-523, 1990.
1. E. Lenz, W. Konig, Cracking behavior of sintered carbides during EDM, Annals of the CIRP, Vol.24, pp.109-114, 1975.
第三章
1. N. Mohri, N. Saito, Y. Tsunekawa, Metal surface modification by electrical discharge machining with composite electrode, Annals of the CIRP, Vol.42, pp.219-222, 1993.
2. Y. Fukuzawa, Y. Kojima, T. Tani, E. Sekiguti, N. Mohri, Fabrication of surface modification layer on stainless steel by electrical discharge machining, Materials and Manufacture Processes, Vol.10, No.2 pp.195-203, 1995.
3. L.C. Lim, L.C. Lee, Y.S. Wong, H.H. Lu, Solidification microstructure of electrodischarge machined surfaces of tool Steels, Materials Science and Technology, Vol.7, pp.239-248, 1991.
4. N. Mohri, N. Saito, M. Higashi, A new process of finish machining on free surface by EDM methods, Annals of the CIRP, Vol.40, pp.207-210, 1995.
5. C.H. Kahng K.P. Rajurkar, Surface characteristics behavior due to rough and fine cutting by EDM, Annals of the CIRP, Vol.25, pp.77-82, 1977.
A. Gangadhar, M.S. Shunmugam, P.K. Philip, Surface modification in electrodischarge processing with a powder compact tool electrode, Wear, 143, pp.45-55, 1991.
6. Y.M. Quan, Y.H. Liu, Poder-suspension dielectric fluid for EDM, Journal of Materials Processing Technology, Vol.52, pp.44-54, 1995.
7. M. Kunieda, S. Furuoya, N. Taniguchi, Improvement of EDM efficiency by supplying oxygen gas into gap, Annals of the CIRP, Vol.40, pp.215-218, 1991.
8. T.B. Thoe, D.K. Aspinwall, M.L.H. Wise, Review on ultrasonic machining, International Journal of Machine Tools and Manufacture, Vol. 38, No.4 pp.239-255, 1998.
9. Q.H. Zhang, J.H. Zhang, Z.X. Jia, J.L. Sun, Materials-removal-rate analysis in the ultrasonic machining of engineering ceramics, Journal of Materials Processing Technology, Vol. 88, pp.180-184, 1999.
10. K.P. Rajurkar, Z.Y. Wang, A. Kuppanttan, Micro removal of ceramic material (Al2O3) in the precision ultrasonic machining, Precision Engineering, Vol.23, pp.73-78, 1999.
11. X.Q. Sun, T. Masuzawa, M. Fujino, Micro ultrasonic machining and its applications in MEMS, Sensors and Actuators, A 57, pp.159-164, 1996.
12. M.A. Moeland D.O. Moore, Versatile performance of ultrasonic machining, Ceramic Bulletin, Vol.67, No.6, pp.1045-1047, 1988.
13. G.E. Miller, Special theory of ultrasonic machining, Journal of Applied phsical, Vol.28, NO.2, pp.149-156, 1957.
14. G. Spur, T. Bruker, S.E. Holl, Ultrasonic machining of ceramics, Industrial Ceramics, Vol.7, No.1, pp.29-34, 1997.
15. H. Hocheng and C.C. Hsu, Preliminary study of ultrasonic drilling of fiber-reinforce plastic, Journal of Materials Processing Technology, Vol.48, pp.255-266, 1995.
16. T.C. Lee, C.W. Chan, Mechanism of the ultrasonic machining of ceramic composites, Journal of Materials Processing Technology, Vol. 71, pp.195-201, 1997.
17. A.B.E. Khairy, Assessment of some dynamic parameters for the ultrasonic machining process, Wear 137, pp.187-198, 1990.
18. D. Kremer, C. Lhiaubet, A. Moisan, A study of the effect of synchronizing ultrasonic vibrations with pulse in EDM, Annals of the CIRP, Vol.40, pp.211-214, 1991.
19. V.S.R. Murthy P.K. Philip, Pulse train analysis in ultrasonic assisted EDM, International Journal of Machine Tools and Manufacture, Vol.27, No.24, pp.469-477, 1987.
20. Z.N. Guo, T.C. Lee, T.M. Yue and W.S. Lau, A study of ultrasonic-aided wire electrical discharge machining, Journal of Materials Processing Technology, Vol.63, pp.823-828, 1997.
21. Z.N. Guo, T.C. Lee, T.M. Yue, W.S. Lau, Study on the machining mechanism of WEDM with ultrasonic vibration of the wire, Journal of Materials Processing Technology, Vol.69, pp.212-221, 1997.
22. B.H. Yan, M.D. Chen, Effect of ultrasonic vibration on electrical discharge machining characteristic of Ti-6Al-4V alloy, Journal of Japan Institute Light Metal, Vol.44, No.5, pp.281-285, 1994.
23. S.L. Chen, F.Y. Huang, Y. Suzuki, B.H. Yan, Improvement of material removal rate of Ti-6Al-4V alloy by electrical discharge machining with multiple ultrasonic vibration, Journal of Japan Institute of Light Metals, Vol.47 No.4, pp.220-225, 1997.
24. Y.C. Lin, B.H. Yan, Y.S. Chang, Machining characteristics of titanium alloy (Ti-6Al-4V) using combination process of EDM with USM, Journal of Materials Processing Technology, 104, pp.171-177, 2000.
25. Z. Jia, X. Ai, J. Zhang, Study on mechanical pulse electric discharge machining, Precision Engineering, Vol.17, No.2, pp.89-94, 1995.
26. Z. Jia, J. Zhang, X. Ai, Combined machining of USM and EDM for advanced ceramics, Journal of Advanced Materials, Vol.26, No.3, pp16-20, 1995.
27. Z. Jia, J. Zhang and X. Ai, Study on a new kind of combined machining technology of ultrasonic machining and electrical discharge machining, International Journal of Machine Tools and Manufacture, Vol.37, No.2, pp.193-199, 1997.
28. M. S. Shunmugam and P. K. Philip, Improvement of wear resistance by EDM with tungsten carbide P/M electrode, Wear, 171, pp.1-5 1994.
29. N. Mohri, N. Saito,Y. Tsunekawa, Metal surface modification by electrical discharge machining with composite electrode, Annals of the CIRP, Vol.42, pp.219-222, 1993.
30. Y. Tsunekawa, M. Okumiya, N. Mohri and E. Kuribe, Formation of composite layer containing TiC precipitates by electrical discharge alloying, Materials Transactions, JIM Vol.38, No.7 pp.630-635, 1997.
31. Y. Tsunekawa, M. Okumiya, N. Mohri and I. Takahashi, Surface modification of aluminum by electrical discharge alloying, Materials Science and Engineering, A174, pp.193-198, 1994.
32. Q.Y. Ming, L.Y. He, Powder-suspension dielectric fluid for EDM, Journal of Materials Processing Technology, Vol.52, pp.44-54, 1995.
33. J.P. Kruth, In-process alloying of the white layer of a Workpiece machine by die-sinking EDM, IJEM., Vol.3, pp.33-38, 1998.
34. R.A. Wood and R.J. Favor, Titanium alloy handbook (MCIC-HB-02), Section 1, (1) P.1-4: 72-1, (2) P.1-4: 72-2.
35. S.L. Chan, B.H. Yan, F.Y. Huang, Influence of kerosene and distilled water as dielectric discharge machining characteristics of Ti-6Al-4V alloy, Journal of Materials Processing Technology, Vol.87, pp.107-111, 1999.
36. E.A. Neppiras, Acoustic cavitationa: an introduction, Ultrasonics, January, pp.25-28, 1984.
37. M. Ramulu, M. Taya, EDM machinability of SiC/Al composites, Journal of Materials Science 24, pp.1103-1108, 1989.
第四章
1. L.C. Lim, L.C. Lee, Y.S. Wong, and H.H. Lu, Solidification microstructure of electrodischarge machined surfaces of tool Steels, Materials Science and Technology, Vol.7, pp.239-248, 1991.
2. L.C. Lee, L.C. Lim, Y.S. Wong, Crack susceptibility of electro-discharge machined surfaces, Journal of Materials Processing Technology, Vol. 29, pp.213-221, 1992.
3. L.C. Lee, L.C. Lim, V. Narayanan, V.C. Venkatesh, Quantification of surface damage of tool steels after EDM, International Journal Machine Tools and Manufacture, Vol.28, No.4, pp.359-372, 1988.
4. T. Tsutsui, T. Tamura, Effect of the electro-discharge machined surface on the mechanical properties-on the fatigue strength of cemented Carbide, Bull. Japan Society of Precision Engineering, Vol.21, No.1, pp.70-71, 1987.
5. T. Tsutsui, T. Tamura, Effect of the electro-discharge machined surface on the mechanical properties-on the surface defect and transverse rupture strength of cemented carbide, Bull. Japan Society of Precision Engineering, Vol.20, No.1, pp.60-61, 1986.
6. N. Mohri, N. Saito, Y. Tsunekawa, Metal surface modification by electrical discharge machining with composite electrode, Annals of the CIRP, Vol.42, No.1 pp.219-222, 1993.
7. Y. Tsuekawa, M. Okumiya, N. Mohri, E. Kuribe, Formation of composite layer containing TiC precipitates by electrical discharge Alloying, Materials Transactions, JIM. Vol.38, No.7, pp.630-635, 1997.
8. Y. Tsuekawa, M. Okumiya, N. Mohri, I. Takahashi, Surface modification of aluminum by electrical discharge alloying, Materials Science and Engineering, A174, pp.193-198, 1994.
9. A. Gangadhar, M.S. Shunmugam, P.K. Philip, Surface modification in electrodischarge processing with a powder compact tool electrode, Wear 143, pp.45-55, 1991.
10. M.P. Samuel, P.K. Philip, Power metallurgy tool electrodes for electrical discharge machining, International Journal Machine Tools and Manufacture, Vol.37, No.11, pp.1625-1633, 1997.
11. B.H. Yan, S.L. Chen, Effects of dielectric with suspended aluminum powder on EDM, Journal of the Chinese society of Mechanical Engineers, Vol.14, No.3, pp.307-312, 1993.
12. Y.S. Wong, L.C. Lim, I. Rahuman, W.M. Tee, Near-mirror-finish phenomenon in EDM using powder-mixed dielectric, Journal of Materials Processing Technology 79 (1989) 30-40.
13. N.H. Loh, S.C. Tam, S. Miyazawa, A study of the effects of ball-burnishing parameters on surface roughness using factorial design, Journal of Mechanical working Technology, Vol.18, No.1, pp.53-61, 1989.
14. N.H. Lon, S.C. Tam, S. Miyazama, Application of experimental design in ball burnishing, International Journal of Machine Tools and Manufacture, Vol.33, No.6, pp.841-852, 1993.
15. N.H. Loh, S. Miyazawa, S.C. Tam, Ball burnishing of tool steel, Precision Engineering, Vol.15, No.2, pp.100-105, 1993.
16. N.H. Loh, S.C. Tom, Effects of ball burnishing parameters on surface finish-A literature survey and discussion, Precision Engineering, Vol.10, No.4, pp.215-220, 1988.
17. S.S. G. Lee, S.C. Tam, N.H. Loh, S. Miyazawa, An investigation into the ball burnishing of an AISI 1045 free-form surface, Journal of Material Processing Technology, Vol. 29, pp.203-211, 1992.
18. S.S. G. Lee, S.C. Tam, N.H. Loh, Ball burnishing of 316L stainless steel, Journal of Materials Processing Technology, Vol.37 (1-4), pp.241-251, 1993.
19. A.M. Hassan, A.S. Al-Bsharat, Improvements in some properties of non-ferrous metals by the application of the ball-burnishing process, Journal of Materials Processing Technology, Vol.59, pp.250-256, 1996.
20. A.M. Hassan, A.S. Al-Bsharat, Influence of burnishing process on surface-roughness, hardness, and microstructure of some nonferrous metals, Wear, (199), pp.1-8, 1996.
21. A.M. Hassan, An investigation into the surface characteristics of burnished cast Al-Cu alloys, International Journal of Machine Tools and Manufacture, Vol.37, No.6, pp.813-821, 1997.
22. A.M. Hassan, The effect of ball-and roller-burnishing on the surface toughness and hardness of some non-ferrous metals, Journal of Materials Processing Technology, Vol.72, pp.385-391, 1997.
23. A.M. Hassan, S.Z.S. Al-Dhifi, Improvement in the wear resistance of brass components by the ball burnishing process, Journal of Materials Processing Technology, Vol.96, pp.73-80, 1999.
24. X. Yu, L. Wang, Effect of various parameters on the surface roughness of an aluminum alloy burnished with a spherical surfaced, International Journal of Machine Tools and manufacture, Vol. 39, pp.459-469, 1999.
25. B.H. Yan, C.C. Wang, H.M. Chow, Y.C. Lin, Feasibility study of rotary electrical discharge machining with ball burnishing for Al2O3/6061 composite, International Journal of Machine Tools and Manufacture, Vol.40 pp.1403-1421, 2000.
26. P.J. Ross, Taguchi techniques for quality Engineering, McGraw-Hill, New York, 1998.
27. G. Taguchi, Introduction to quality engineering, Asain Productivity Organization, Tokyo, 1990.
28. D. Scott, S. Boyina and K.P. Rajurkar, Analysis and optimization of parameter combination in wire electrical discharge, International Journal of Production Research, Vol.29, pp.2189-2207, 1991.
29. M. S. Phadke, Quality engineering using robust design, Prentice Hall, Englewood Cliffs, NJ, 1989.
30. Y.S. Liao, J.T. Huang, H.C. Su, A study on the machining-parameter optimization of wire electrical discharge machining, Journal of Materials Processing Technology, Vol.71, pp.487-493, 1997.
31. E.S. pearson and H.O. Hartley, Tables for statisticians, Biometrika, 2, pp.178, 1972.
32. J.T. Yang, S.S. Ho, H.M. Chow, Study on energy transformation during micro-EDM discharge process, in: Proceedings of the Second Conference on Nano-technology and Micro-system Technology, pp.28-294, 1988.
|