參考文獻 |
[1] Shiao, Y. P. (2000), " A study on multiaxial cyclic loading and anisotropic plasticity of structural metals ", Ph.D. Thesis, National Taiwan University, Dept. of C.E.
[2] Lamba, H. S., and Siderbottom, O. M. (1978), " Cyclic plasticity for nonproportional path: part1:Cyclic hardening, erasure of memory, and subsequent strain hardening experiments ", J. of Eng. Mat. and Tech., Vol. 100, pp. 96-103.
[3] Wu, H.C., Yeh, W.C., (1991), " On the experimental determination of yield surfaces and some results of annealed 304 stainless steel ", Int. J. of Plasticity, Vol. 7, pp. 803-826.
[4] Tresca H., (1864), Comptes Rendus Acad. Sci. Paris, 59, pp.754.
[5] von Mises R., (1913), G ttinger. Nachrichten Math. Phys., Klasse, pp. 582.
[6] Ivey, H. J., (1961), " Plastic Stress-Strain Relations and Yield Surface for Aluminum Alloys ", J. Mech. Eng. Sci., Vol. 3, No.1, pp. 15-31.
[7] Mair, W. M. and Pugh, H. L. D., (1964), " Effect of Pro-strain on Yield Surfaces in Copper ", J. Mech. Eng. Sci., Vol. 6, pp. 150-163.
[8] Marjanovic, R., and Szczeinski, W., (1975), " On the Effect of Biaxial Cyclic Loading on the Yield Surface of M-63 Brass ", Acta Mech., No. 23, pp. 65-74.
[9] Phillips, A., Lin, C. S. and Justusson, J. W., (1972), " An Experimental Investigation of Yield Surface at Elevated Temperature ", Acta Mech., No. 14, pp. 119-146.
[10] Phillips, A. and Tang, J. L., (1972), " The Effect of Loading Path on the Yield Surface as Elevated Temperatures ", Int. J. of Solids and Structures, Vol. 8, pp. 463-474.
[11] Phillips, A. and Kasper, R., (1973), " On the Foundation of Thermoplasticity-An Experimental Investigation ", J. Appl. Mech., Vol. 40, pp. 891-896.
[12] Phillips, A., Tang, J. L. and Riccuti, M., (1974), " Some New Observation on Yield Surface ", Acta Mech., Vol. 20, pp. 23-29.
[13] Phillips, A. and Lu, W. Y., (1984), " An Experimental Investigation of Yield Surface and Loading Surface of Pure Aluminum with Stress-Controlled and Strain-Controlled paths of Loading ", J. of Engineering Material and Technology, Vol. 106, pp. 349-354.
[14] Dafalias, Y.F., Aifantis, E.C., (1990), " On the microscopic origin of the plastic spin ", Acta Mech., Vol. 82, pp. 31-48.
[15] Beaudoin, A.J., Dawson, P.R., Mathur, K.K., Kocks, U.F., Korzekwa, D.A., (1991), " Application of polycrystalline plasticity to sheet forming. Comp. Math ", Appl. Mech. Eng., Vol. 117, pp. 49-70.
[16] Ning, J., Aifantis, E.C., (1996), " Anisotropic yield and plastic flow of polycrystalline solids ", Int. J. Plasticity, Vol. 12, pp. 1221-1240.
[17] Miehe, C.,Schotte, J., Schroder, J., (1999), " Computational micro-macro transitions and overall moduli in the analysis of polycrystals at large strains " Computational Mater. Sci., Vol. 16, pp. 372-382.
[18] Diard, O., Leclercq, S., Rousselier, G., Cailletaud. G., (2005), " Evaluation of finite element based analysis of 3D multicrystalline aggregates plasticity: Application to crystal plasticity model identification and the study of stress and strain fields near grain boundaries ", Int. J. Plasticity, Vol. 21, pp. 691-722.
[19] Khan, A.S., Cheng, P., (1996), " An anisotropic elastic plastic constitutive model for single and polycrystalline metals I- theoretical developments " Int. J. Plasticity, Vol. 12, pp. 147-162.
[20] Raabe, D., (2000), " Yield surface simulation for partially rescrystallized aluminum polycrystals on the basis of spatially discrete data ", Computational Mater. Sci., Vol. 19, pp. 13-26.
[21] Chiang, D.Y., Su, K.H., Liao C.H., (2002), " A study on subsequent yield surface based on the distributed-element model ", Int. J. Plasticity, Vol. 18, pp. 51-70.
[22] Bucher, A., Gorke, U.J., Kreißig, R., (2004), " A material model for finite elasto-plastic deformations considering a substructure ", Int. J. Plasticity, Vol. 20, pp. 619-642.
[23] Kowalczyk, K., Gambin, W., (2004), " Model of plastic anisotropy evolution with texture-dependent yield surface ", Int. J. Plasticity, Vol. 20, pp. 19-54.
[24] Ganapathysubramanian, S., Zabaras, N., (2005), " Modeling the thermoelastic–viscoplastic response of polycrystals using a continuum representation over the orientation space ", Int. J. Plasticity, Vol. 21, pp. 119-144.
[25] Shiratori, E., Ikegami, K., Yoshida, F., (1979), " Analysis of stress-strain relations by use of an anisotropic hardening plastic potential ", J. Mech. Phys. Solids, Vol. 27, pp. 213-229.
[26] Barlet, F., Brem, J.C., Yoon, J.W., Chung, K., Dick, R.E., Lege, D.J., Pourboghrat, F., Choi, S.-H., Chu, E., (2003), " Plane stress yield stress function for aluminum alloy sheets-part I: theory ", Int. J. Plasticity, Vol. 19, pp. 1297-1319.
[27] Barlat, F., Aretz, H., Yoon, J.W., Karabin, M.E., Brem, J.C., Dick, R.E., (2005), " Linear transfomation-based anisotropic yield functions ", Int. J. Plasticity, Vol. 21, pp.1009-1039.
[28] Hu, W.L., (2005). " An orthotropic yield criterion in a 3-D general stress state ", Int. J. Plasticity, Vol. 21, pp. 1771-1796.
[29] Stoughton, T.B., Yoon, J.W., (2004), " A pressure-sensitive yield criterion under a non-associated flow rule for sheet metal forming ", Int. J. Plasticity, Vol. 20, pp. 705-731.
[30] Vincent, L., Calloch, S., Marquis, D., (2004), " A general cyclic plasticity model taking into account yield surface distortion for multiaxial ratcheting ", Int. J. Plasticity, Vol. 20, pp. 1817-1850.
[31] Mroz, Z., (1967), " On the description of anistropic work-hardening ", J. Mech. Phys. Solids, Vol. 15, pp. 163-175.
[32] Khoei, A.R., Jamali, N., (2005), " On the implementation of a multi-surface kinematic hardening plasticity and its applications ", Int. J. Plasticity, Vol. 21, pp. 1741-1770.
[33] Krieg, R.D., (1975), " A practical two surface plasticity theory ", J Appl. Mech., Vol. 42, pp. 641-646.
[34] Dafalias, Y.F., Popov, E.P., (1976), " Plastic internal variables formalism of plasticity ", J. Appl. Mech., Vol. 43, pp. 645-651.
[35] Valanis, K.C., (1971), " A theory of viscoplasticity without a yield surface, Part I: General theory ", Arch. Mech., Vol. 23, pp. 517-551.
[36] Valanis, K.C., (1980), " Fundamental consequence of a new intrinsic time measure-plasticity as a limit of the endochronic theory ", Arch. Mech., Vol. 32, pp. 171-191.
[37] Krempl, E. and Lu, H., (1984), " The hardening and rate dependent behavior of fully annealed AISI type 304 stainless steel under biaxial in-phase and out-of –phase strain cycling at room temperature ", J. Eng. Mater. Tech., Vol. 106, pp. 376-384.
[38] Tanaka, E., Murakami, S., and Ooka, M., (1985), " Effects of strain path shapes on non-proportional cyclic plasticity ", J. Mech. Phys. Solids, Vol. 33(6), pp. 559-575.
[39] Tanaka, E., Murakami, S., and Ooka, M., (1985), " Effects of plastic strain amplitudes on non-proportional cyclic plasticity ", Acta Mech., Vol. 57, pp. 167-192.
[40] Hopperstad, O. S., Langseth, M., and Remseth, S., (1995), " Cyclic stress-strain behaviour of alloy AA6060 T4, part I: biaxial experiments and modeling ", Int. J. of Plasticity, Vol. 11, pp. 725-739.
[41] Hopperstad, O. S., Langseth, M., and Remseth, S., (1995), " Cyclic stress-strain behaviour of alloy AA6060 T4, part II: biaxial experiments and modeling ", Int. J. of Plasticity, Vol. 11, pp.741-762.
[42] Cailletaud, G., (1984), " Some elements on multiaxial behavior of 316L stainless steel at room temperature ", Mech. of Mat, Vol. 3, pp. 333-345.
[43] Ellyin, F., and Wolodko, J.D., (1997), " Testing facilities for multiaxial loading of tubular specimens, multiaxial fatigue and deformation testing techniques ", ASTM STP 1280, S. Kalluri and P. J. Bonacuse, Eds, ASTM, pp. 7-24.
[44] Basuroychowdhury, I. N., and Voyiadjis, G. Z., (1998), " A multiaxial cyclic plasticity model for nonproportional loading cases ", Int. J. of Plasticity, Vol. 14, pp. 855-870.
[45] Benallal, A., LeGallo, P., Marquis, D., (1989), " An experimental investigation of cyclic hardening of 316 stainless steel and 2024 aluminum alloy under multiaxial loadings. Nuclear Engineering Design 114 ", pp. 345-353.
[46] Ohno, N., (1990)," Recent topics in constitutive modeling of cyclic plasticity and viscoplasticity ", Appl. Mech. Rev. 43(11), pp. 283-295.
[47] Calloch, S., Marquis, D., (1999)," Triaxial tension–compression tests for multiaxial cyclic plasticity ", Int. J. of Plasticity, Vol. 15, pp. 521-549.
[48] Bocher, L., Delobelle, P., Robinet, P., Feaugas, X.,(2001), " Mechanical and microstructural investigations of an austenitic stainless steel under non-proportional loadings in tension–torsion-internal and external pressure ", Int. J. of Plasticity, Vol. 17, pp. 1491-1530.
[49] Ohno, N., (1982), " A constitutive model of cyclic plasticity with a non-hardening strain region ", ASME J. Appl. Mech., Vol.49, pp.721-727.
[50] Ohno, N., Kachi, Y., (1986), " A constitutive model of cyclic plasticity for nonlinear hardening materials", ASME J. Appl. Mech., Vol.53, pp.395-403.
[51] Chaboche, J.L., Dang Van, K., Cordier, G., (1979), " Modelization of the strain memory effect on the cyclic hardening of 316 stainless steel ", Transactions of SMiRT 5, Vol. L, paper No. L11/3.
[52] Chaboche, J.L., (1989), " Constitutive equations for cyclic plasticity and cyclic viscoplasticity ", Int. J. Plasticity, Vol.5, pp. 247-302.
[53] Choi, S., Krempl, E., (1992), " Viscoplasticity theory based on overstress the modeling of ratcheting and cyclic hardening of AISI type 304 stainless steel ", Nuclear Engineering and Design Vol.133, pp. 401-410.
[54] Calloch, S., Marquis, D., (1999), " Triaxial tension–compression tests for multiaxial cyclic plasticity ", Int. J. Plasticity, Vol. 15, pp. 521-549.
[55] Yoshida, F., (2000), "A constitutive model of cyclic plasticity " Int. J. Plasticity, Vol. 16, pp. 359-380.
[56] Bocher, L., Delobelle, P., Robinet, P., Feaugas, X., (2001) " Mechanical and microstructural investigations of an austenitic stainless steel under non-proportional loadings in tension–torsion-internal and external pressure ", Int. J. Plasticity, Vol. 17, pp. 1491-1530.
[57] Kang, G., Ohno, N., Nebu, A., (2003) "Constitutive modeling of strain range dependent cyclic hardening ", Int. J. of Plasticity, Vo. 19, pp. 1801-1819.
[58] Colak, O., U, Krempl, E., (2004) " A viscoplasticity theory applied to proportional and non-proportional cyclic loading at small strains ", Int. J. Plasticity, Vol. 20, pp. 1387-1401.
[59] Yoshida, F., Uemori, T., (2002) "A model of large-strain cyclic plasticity describing the Bauschinger effect and workhardening stagnation", Int. J. Plasticity, Vol. 18, pp. 661-686.
[60] Yaguchi, M., Yamamoto, M., Ogata, T., (2002) "A viscoplastic constitutive model for nickel-base superalloy, part 1: kinematic hardening rule of anisotropic dynamic recovery " Int. J. Plasticity, Vol. 18, pp. 1083-1109.
[61] Dieng, L., Abdul-Latif, A., Haboussi, M., Cunat, C., (2005), "Cyclic plasticity modeling with the distribution of non-linear relaxations approach", Int. J. of Plasticity, Vol. 21, pp. 353-379
[62] Cunat, C., (1988), " Thermodynamic treatment of relaxation in frozening system. Universiality of the fluctuation distribution law for relaxation time ", Zeit. Fur Phys. Chem. Neue Folge, pp. 157-419.
[63] Liu, C. S., (2006), " Reconcile the perfectly elastoplastic model to simulate the cyclic behavior and ratcheting ", Int. J. of Solids and Structures, Vol. 43, pp. 222-253.
[64] Valanis, K. C., (1984)," Continuum foundations of Endochronic plasticity ", J. of Eng. Mat. and Tech., Vol. 106, pp. 367-375.
[65] Wu, H. C., and Yip, M. C., (1981), " Endochronic description of cyclic hardening behavior of metallic material ", J. of Eng. Mat. and Tech., Vol. 103, pp. 212-217.
[66] Watanabe, O., and Atluri, S. N., (1986), " Constitutive modeling of cyclic plasticity and creep, using an internal time concept ", Int. J. of Plasticity, Vol. 2, pp. 107-134.
[67] Yeh, W. C., Cheng, J. Y., and Her, R. S., (1994), " Analysis of Plastic Behavior to Cyclically Uniaxial Tests Using an Endochronic Approach ", J. of Eng. Mat. and Tech. ASME, Vol. 116, pp. 62-67.
[68] Lee, C. F., (1984), " Endochronic theory of cyclic plasticity with applications", J. of Applied Mechanics, Vol. 51, pp. 367-374.
[69] Lee, C. F., (1995), "Recent finite element applications of the incremental edochronic plasticity ", Int. J. of Plasticity, Vol. 11, pp. 843-865.
[70] Pan, W. F., and Chern, C. H., (1997), " Endochronic description for viscoplastic behavior of materials under multiaxial loading ", Int. J. of Solids and Structures, Vol. 34, pp. 2131-2160.
[71] Pan, W. F., Chiang, W. J., and Wang C. K., (1999), " Endochronic analysis for rate-dependent elasto-plastic deformation ", Int. J. of Solids and Structures, Vol. 36, pp. 3215-3237.
[72] Wu, H. C., Yao, J. C., and Chu, S. C., (1986), " Investigation of Endochronic constitutive equation subject to plastic strain-controlled axial-torsional deformation ", J. of Eng. Mat. and Tech., Vol. 108, pp. 262-269.
[73] Yeh, W. C., (1995), " Verification of the Endochronic theory of plasticity under biaxial load " J. of the Chinese Institute of Engineers, Vol. 18(1), pp. 25-34.
[74] Yeh, W.C., Ho, C.D., Pan, W.F., (1996), " An endochronic theory accounting for deformation induced anisotropy " Int. J. of Plasticity, Vol. 12, pp. 987-1004.
[75] Yeh, W. C., and Lin, H. Y., (2006), " An Endochronic model of yield surface accounting for deformation induced anisotropy ", Int. J. of Plasticity, Vol. 22, pp. 16-38.
[76] Lee, C. F., (1997), " Intrinsic time measure of Endochronic plasticity with plastic strain induced anisotropy ", The Chinese J. of Mechanics, Vol. 13, pp. 161-174.
[77] Wu, H.C., Yeh, W.C., (1987), " Some consideration in the endochronic description of anisotropic hardening ", Acta Mech., Vol. 69, pp. 59-76.
[78] Yeh, W. C., Cheng, J. Y., and Her, R. S., (1994), " Analysis of Plastic Behavior to Cyclically Uniaxial Tests Using an Endochronic Approach ", J. of Eng. Mat. and Tech. ASME, Vol. 116, pp. 62-67.
[79] Khan, A.S., Wang, X., (1993), " An experimental study on subsequent yield surface after finite shear prestraining ", Int. J. Plasticity, Vol. 9, pp. 889-905.
[80] Ohashi, Y., kawashima, K., Yokochi, M., (1975), " Anisotropy due to plastic deformation of initially isotropic mild steel and its analytical formulation " J. Mech. Phys. Solids, Vol. 23, pp. 277-294.
[81] Ellis, J.R., Robinson, D.N., Pugh, C.E., (1983), " Time dependence in biaxial yield of type 316 stainless steel at room temperature ", J. Eng. Mat. Tech., Vol. 105, pp. 250-256.
[82] Stout, M.G., Martin, P.L., Helling, D.E., Canova, G.R., (1985), " Multiaxial yield behavior of 1100 aluminum following various magnitudes of prestrain ". Int. J. Plasticity, Vol. 1, pp. 163-174.
[83] Cheng, S., Krempl, E., (1991), " Experimental determination of strain-induced anisotropy during non-proportional straining of an Al/Mg alloy at room temperature " Int. J. Plasticity, Vol. 7, pp. 827-846.
[84] Ishikawa, H., Sasaki, K., (1998), " Deformation induced anisotropy and memorized back stress in constitutive model ", Int. J. Plasticity, Vol. 14 (7), pp. 627-646.
[85] Brown, A.A., Casey J., Nikkel Jr., D.J., (2003), " Experimental conducted in the contest of the strain-space formulation of plasticity " Int. J. Plasticity, Vol. 19, pp. 1965-2005.
[86] Wu, P. D., MacEwen, S. R., Lloyd, D. J., Jain, M., Tugcu P., Neale, K. W., (2005), " On pre-straining and the evolution of material anisotropy in sheet metals ", Int. J. of Plasticity, Vol. 21, pp. 723-739.
[87] Kuwabara, T., Yoshida, K., Narihara K., Takahashi, S., (2005), " Anisotropic plastic deformation of extruded aluminum alloy tube under axial forces and internal pressure ", Int. J. Plasticity, Vol. 21, pp. 101-177.
[88] Ishikawa, H., (1997), " Subsequent yield surface probed from its current center ", Int. J. Plasticity, Vol. 13 (6-7), pp. 533-550.
[89] Helling, D.E., Miller, A.K., Stout, M.G., (1986), " An experimental investigation of the yield loci of 1100-O aluminum, 70:30 brass, and an overaged 2024 aluminum alloy after various prestrains ", J. Eng. Mat. Tech., Vol. 108, pp. 313-320.
[90] Williams, J.F., Svensson, N.L., (1970), " Effect of tensile prestrain on the yield locus of 1100-F aluminum ", J. Strain Anal., Vol. 5, pp. 128-139.
[91] Williams, J.F., Svensson, N.L., (1971), " Effect of torsionnal prestrain on the yield locus of 1100-F aluminum ", J. Strain Anal., Vol. 6, pp. 263-272.
[92] Phillips, A., Weng, G.J., (1975), " An analysis study of an experimentally verified hardening law ", J. Appl. Mech., Vol. 42, pp. 375-378.
[93] Eisenberg, M.A., Yen, C.F., (1984), " The anisotropic deformation of yield surfaces ", J. Eng. Mat. Tech., Vol. 10, pp. 431-449.
[94] Kurtyka, T., Zyczkowski, M., (1985), " A geometric description of distortional plastic materials ", Arch. Mech., Vol. 37, pp. 383-395.
[95] Kurtyka, T., (1988), " Parameter identification of a distortional model of subsequent yield surfaces ", Arch. Mech., Vol. 40, pp. 433-454.
[96] Ilyushin, A.A., (1954), " On the relation between stress and small deformation in the mechanics of continuous media ", Prikl. Mat. Mekh., Vol. 18, pp.641-666 (in Russian).
[97] Lensky, V.S., (1960), " Analysis of plastic behavior of metals under complex loading ", In: Lee, E.H., Symonds, P.S. (Eds), Plasticity, Proc. 2nd Symp. Naval Struc. Mech., Brown University, pp. 259-278.
[98] Kurtyka, T., Zyczkowski, M., (1996), " Evolution equations for distortional plastic hardening ", Int. J. Plasticity, Vol. 12, pp. 191-213.
[99] Hill, R., (1948), " A theory of yielding and plastic flow of anisotropic metals ", Proc. Roy. Soc. of London A, Vol. 193, pp. 281-297.
[100] Wu, H.C., Hong, H.K., Lu, J.K., (1995), " An endochronic theory accounted for deformation induced anisotropy ", Int. J. of Plasticity, Vol. 11, pp. 145-162.
[101] Wu, H.C., Hong, H.K., Shiao, Y.P., (1999), " Anisotropic plasticity with application to sheet metals ", Int. J. Mech. Sci., Vol. 41, pp. 703-724.
[102] Baltov, A., Sawczuk, A., (1965), " A rule of anisotropic hardening ", Acta Mech., Vol. 1, pp. 81-92.
[103] Lee, D., Zavrel, F., Jr., (1978), " A generalized strain rate dependent constitutive equation for anisotropic metals ", Acta Metallurgy, Vol. 26, pp. 1771-1780.
[104] Ferron, G., Makkouk, R., Morreale, J., (1994), " A parametric description of orthotropic plasticity in metal sheets ", Int. J. Plasticity, Vol. 17, pp. 703-717.
[105] Barlat, F., Becker, R.C., Hayashida, Y., Maeda, Y., Yanagawa, M., Chung, K., Brem, J.C., Lege, D.J., Matsui, K., Murtha, S.J., Hattori, S.,
[106] Kowalsky, U., Ahrens, H., Dinkler, D., (1999), " Distorted yield surfaces-modeling by higher order anisotropic hardening tensors " Computational Mater. Sci., Vol. 16, pp. 81-88.
[107] Kim, J.B., Yang, D.Y., Yoon, J.W., Barlat, F., (2000), " The effect of plastic anisotropy on compressive instability in sheet metal forming ", Int. J. Plasticity, Vol. 16, pp. 649-676.
[108] Francois, M., (2001), " A plasticity model with yield surface distortion for non proportional loading ", Int. J. Plasticity, Vol. 8, pp. 729-740.
[109] Bron, F., Besson, J., (2004), " A yield function for anisotropic materials application to aluminum alloys ", Int. J. Plasticity, Vol. 20, pp. 937-963.
[110] Cazacu, O., Barlet, F, (2004), " A criterion for description of anisotropy and yield differential effects in pressure-insensitive metals " Int. J. Plasticity, Vol. 20, pp. 2027-2045.
[111] Chung, K., Lee, M.G., Kim, D., Kim, C., Michael, L., Barlat, W.F., (2005), " Spring-back evaluation of automotive sheets based on isotropic-kinematic hardening laws and non-quadratic anisotropic yield functions: Part I: theory and formulation ", Int. J. Plasticity, Vol. 21, pp.861-882.
[112] Kyriakides, S., Corona, E., Miller J.E. (2004), " Effect of yield surface evolution on bending induced cross sectional deformation of thin walled sections ", Int. J. Plasticity, Vol. 20, pp. 607-618.
[113] Shiratori, E. Ikegami, K. and Kaneko, K., (1973), " Subsequent Yield Surface Determined in Consideration of Bauchinger Effect ", Foundations of Plasticity, Edited by Sawczuk, A., Noordnoff, pp. 477-490.
[114] Shiratori, E. Ikegami, K. and Yoshida. F., (1976), " The Subsequent Yield Surface after Proportional Preloading of the Tresca Type Material ", Bulletin of the JSME, 19, pp.1122-1128.
[115] Shiratori, E., Ikegami. K., Yoshida, F., Kaneko. K. and Koike, S., (1976), " The Subsequent Yield Surfaces after preloading under Combined Axial Load and Torsion ", Bulletin of the JSME, Vol. 19, pp. 877-883.
[116] Sandler, I. S., (1978), " On the uniqueness and stability of endochronic theories of material behavior ", J. of Applied Mechanics, Vol. 45, pp. 263-266.
[117] Rivlin, R. S., (1981), " Some comments on the endochronic theory of plasticity ", Int. J. of Solids and Structures, Vol. 17, pp. 231-248.
[118] Valanis, K. C., and Fan, J. (1983), " Endochronic analysis of cyclic elastoplastic strain fields in a notch plate ", J. of Appl. Mech. ASME, Vol. 50, pp, 789-794.
[119] Murakami, H., and Read, H. E. (1989), " A second-order numerical scheme for integrating the endochronic plasticity equations ", Computers and Structures, Vol. 31, pp. 663-672.
[120] Valanis, K. C., and Fan, J. H., (1984), " A numerical algorithm for Endochronic plasticity and comparison with experiment ", Computer and Structures, Vol. 19, pp.717-724. |