射出/壓縮轉注成型充填階段中流場特性之分析

以作者查詢圖書館館藏

、以作者查詢臺灣博碩士

、以作者查詢全國書目

、勘誤回報

、線上人數：76

、訪客IP：18.225.195.4

姓名

游智森(Chih-Sen Yu) 查詢紙本館藏

畢業系所

機械工程學系

論文名稱

射出/壓縮轉注成型充填階段中流場特性之分析
(Injection/ Compression Liquid Composite Molding)

相關論文

★ 迴轉式壓縮機泵浦吐出口閥片厚度對性能影響之研究	★ 鬆弛時間與動態接觸角對旋塗不穩定的影響
★ 電化學製作針錐微電極之製程研究與分析	★ 蚶線形滑轉板轉子引擎設計與實作
★ 利用視流法分析金屬射出成形脫脂製程中滲透度與毛細壓力之關係	★ 應用離心法實驗探求多孔介質飽和度與毛細力之關係
★ 利用網絡模型數值模擬粉末射出成形製程毛細吸附脫脂機制	★ 轉注成形充填過程之巨微觀流數值模擬
★ 二維熱流效應對電化學加工反求工具形狀之分析	★ 金屬粉末射出成形製程中胚體毛細吸附脫脂之數值模擬與實驗分析
★ 飽和度對金屬射出成形製程中毛細吸附脫脂之影響	★ 轉注成型充填過程巨微觀流交界面之數值模擬
★ 轉注成型充填過程中邊界效應之數值模擬	★ 鈦合金整流板電化學加工技術研發
★ 脈衝電化學加工過程中氣泡觀測與分析	★ 金屬粉末射出成型二維毛細吸附脫脂及飽和度之研究

檔案

[Endnote RIS 格式]

[Bibtex 格式]

[相關文章]

[文章引用]

[完整記錄]

[館藏目錄]

[檢視]

[下載]

本電子論文使用權限為同意立即開放。
已達開放權限電子全文僅授權使用者為學術研究之目的，進行個人非營利性質之檢索、閱讀、列印。
請遵守中華民國著作權法之相關規定，切勿任意重製、散佈、改作、轉貼、播送，以免觸法。

摘要(中)

樹脂轉注成型(RTM)因其加工週期短，而且產品的精度與強度高、樣式易於變更，故近年來在航太，汽車及精密工業上的應用上日趨廣泛。當成品的尺寸太大，或纖維的滲透度太小時，便需要相當長的充填時間；因此本計畫擬使用射出壓縮轉注成型充填方式來縮短充填過程的時間。
本實驗採用透明壓克力製成模具配合視流法來分析，及模擬射出壓縮轉注成型在充填階段的流場狀態，再配合理論(Buckingham Theorem )找出相關的製程參數，如入射壓力、壓縮壓力、間隙尺寸、空孔度、滲透率、表面張力、速度等其間的關係，並描繪成函數圖形；此外並與樹脂轉注成型做比較以找出其優點。

摘要(英)

In recent years, Resin Transfer Molding (RTM) has been widely used in aerospace, automobile and precision industries, because its processing cycle is short; besides the stiffness and precision of its products are high and the styles of the products can be easily changed. Due to the size of a finish is too large, or the permeability of the fiber is too low, the filling time would be longer. Therefore, we try to use the filling method of Injection-Compression liquid composite molding to shorten the filling time.
The experiment use transparent acrylic mold, combined with flow field visualization to analyze and simulate the flow field condition of Injection-Compression liquid composite molding in filling period. We use Buckingham Theorem to couple the processing parameters, such as injection pressure, compression pressure, gap size, porosity, permeability, surface tension, velocity, and plot them as a function diagram; besides, we also compare our findings with RTM to show the advantages of Injection-Compression liquid composite molding.

關鍵字(中)

★ 多孔性介質
★ 樹脂轉注成型
★ 射出壓縮轉注成型
★ 液態複材成型
★ 強化塑膠

關鍵字(英)

★ Injection / Compression Liquid Composite Molding
★ Liquid Composite Molding
★ reinforced plastic
★ Resin Transfer Molding
★ porous media

論文目次

摘要…………………………………………………………………… Ⅰ
英文摘要……………………………………………………………… Ⅱ
目錄…………………………………………………………………… Ⅲ
表目錄………………………………………………………………… Ⅴ
圖目錄………………………………………………………………… Ⅵ
符號說明……………………………………………………………… Ⅷ
第一章、緒論………………………………………………………… 1
1-1 前言…………………………………………………… 1
1-2 研究動機……………………………………………… 2
1-3 文獻回顧……………………………………………… 3
1-4 研究目的……………………………………………… 9
第二章、實驗原理與設計方法……………………………………… 11
2-1射出壓縮轉注成型充填階段理論分析.……………… 11
2-2射出壓縮轉注成型無因次分析………………………. 14
2-3整體充填時間………………………………………… 17
2-4空孔度………………………………………………… 18
2-5滲透度………………………………………………… 20
2-6間隙尺寸……………………………………………… 20
第三章、實驗裝置與實驗步驟……………………………………… 21
3-1實驗材料……………………………………………… 21
3-2實驗設備……………………………………………… 24
3-3實驗步驟……………………………………………… 29
3-4注意事項……………………………………………… 30
第四章、實驗結果與討論…………………………………………… 32
4-1射出壓縮轉注成型的流動面理論半徑和時間……… 32
4-2無因次分析…………………………………………… 33
4-3入射壓力和壓縮壓力的影響………………………… 36
4-4壓縮階段起始時刻的影響…………………………… 38
4-5充填間隙尺寸的影響………………………………… 40
4-6 纖維蓆的應變和應變的關係……………………….. 41
第五章、結論………………………………………………………… 43
第六章、參考文獻…………………………………………………… 45
表……………………………………………………………………… 52
圖……………………………………………………………………… 53

參考文獻

J. P .Coulter and S. I. Guceri, ”Resin Transfer Molding, Process view, Modeling and Research Opportunities,” Proc. of the ASME Manufacturing Inter. Altlanta, 79-86 (1988).
2. M. V. Bruschke and S. G. Advani, “A finite Element/Control Volume Approach to Mold Filling in Anisotropic Porous Media,” Polymer Composites, 11, 398-405 (1990).
3. W. B. Young, K. Rupel, K. Han, L. J. Lee and M. J. Liou, “Analysis of Resin Injection Molding in Molds with Preplaced Fiber Mats. II: Numerical Simulation and Experiments of Mold Filling,” Polymer Composites, 12, 30-38 (1991).
4. W. B. Young, K. Han, L. H. Fong, L. J. Lee and M. J. Liou, “Flow Simulation in Molds with Preplaced Fiber mats,” Polymer Composites, 12, 391-403 (1991).
5. F. Trochu and R. Gauvin, “Limitations of a Boundary-Fitted Finite Difference Method for the Simulation of the Resin Transfer Molding Process,” J. of Reinforced Plastics and Composites, 11, 772-786 (1992).
6. A. W. Chan and S. T. Hwang, “Modeling Nonisothermal Impregnation of Fibrous Media With Reactive Polymer Resin,” Polymer Engineering and Science, 32, 310-318 (1992).
7. C. H. Wu, T. J. Wang and L. J. Lee, "Trans-Plane Fluid Permeability Measurement and Its Applications in Liquid Composite Molding," Polymer Composites, 15 289-298 (1994).
8. K. J. Bowles and S. Frimpong, “Void Effects on the Interlaminar Shear Strength of Unidirectional Graphite-Fiber-Reinforced Composites,” J. of Composite Material, 26, 1487-1509 (1992).
9. J. S. Hayward and B. Harris, “Effect of Process Variables on The Quality of RTM Mouldings,” SAMPE J., 26, 39-46 (1990).
10. Y. T. Chen, H. T. Daves and C. W. Macosko, “Wetting of Fiber Mats for Composites Manufacturing: I. Visualization Experiments,” AICHE Journal, 41, 2261-2273 (1995).
11. C. W. Macosko, RIM Fundamentals of Reaction Injection Molding, New York, Oxford University (1989).
12. A. W. Chan and R. J. Morgan, “Modeling Preform Impregnation and Void Formation in Resin Transfer Molding of Unidirectional Composites,” SAMPE QUARTERLY, April., 48-52 (1992).
13. A. W. Chan and R. J. Morgan, “Tow Impregnation During Resin Transfer Molding of Bi-Directional Nonwoven Fabrics,” Polymer Composites, 14, 335-340 (1993).
14. R. S. Parnas and F. R. Phelan Jr., “The Effect of Heterogeneous Porous Media on Mold Filling in Resin Transfer Molding,” SAMPE QUARTERLY, January., 53-60 (1991).
15. Y. T. Chen, C. W. Macosko and H. T. Daves, “Wetting of Fiber Mats for Composites Manufacturing: II. Air Entrapment Model,” AICHE Journal, 41, 2274-2281 (1995).
16. C.Y. Chang and L.W. Hourng, ” Study on Void Formation in Resin Transfer Molding,” Polymer Engineering and Science, 12, 809-818 (1998).
17. C.Y. Chang and L.W. Hourng, “Numerical Simulation for the Transverse Impregnation in Resin Transfer Molding,” J. of reinforced Plastics and Composites, 17, 165-182 (1998).
18. G. L. Batch, Y. T. Chen. and C. W. Macosko, “Capillary Impregnation of Aligned Fibrous Beds: Experiments and Model,” J. of Reinforced Plastics and Composites, 15, 1027-1051 (1996).
19. N. Patel, V. Rohatgi and L. J. Lee, “Micro Scale Flow Behavior and Void Formation Mechanism During Impregnation Through a Undirection Stitched Fiberglass Mat,” Polymer Engineering and Science, 35, 837-851 (1995).
20. N. Patel and L. J. Lee, “Effects of Fiber Mat Architecture on Void Formation and Removal in Liquid Composite Molding,” Polymer Composites, 16, 386-399 (1995).
21. V. Rohatgi, N. Patel and L. J. Lee, “Experimental Investigation of Flow-Induced Microvoids During Impregnation of Unidirectional Stitched,” Polymer Composites, 17, 161-170 (1996).
22. N. Patel, V. Rohatgi, and L. J. Lee, “Influence of Processing and Material Variables on Resin-Fiber Interface in Liquid Composite Molding,” Polymer Composites, 14, 161-172 (1993).
23. A. D. Mahale, R. K. Prud’’homme and L. Rebenfeld, “Quantitative Measurement of Voids Formed During Liquid Impregnation of Nonwoven Multifilament Glass Networks Using an Optical Visualization Technique,” Polymer Engineering and Science, 32, 319- 326 (1992).
24. W. B. Young and C. W. Tseng, “Study on the Pre-Heated Temperatures and Injection Pressures of the RTM Process,” J. of Reinforced Plastics and Composites, 13, 467-482 (1994).
25. 洪勵吾, ”應用蒙地卡羅法模擬及實驗觀測探討轉注成形製程中充填階段毛細位移對流動面與微氣泡消長之影響,” 行政院國家科學委員會專題研究成果報告 NSC88-2212-E-008-006 (1999).
26. N. Patel and L. J. Lee. “Modeling of Void Formation and Removal in Liquid Composite Molding. Part I: Wettability Analysis,” Polymer Composites, 17, 96-103 (1996).
27. N. Patel and L. J. Lee. “Modeling of Void Formation and Removal in Liquid Composite Molding. Part II: Model Development and Implementation,” Polymer Composites, 17, 104-114 (1996).
28. 張智淵,陳志誠,洪勵吾,”轉注成型充填過程中樹脂在纖維蓆中飽和度分布之模擬,” 中國機械工程學會第十七屆學術研討會, 1, 591-589 (2000).
29. K. M. Pillai and S. G. Advani. “Numerical Simulation of Unsaturated Flow in Woven Fiber Preforms During the Resin Transfer Molding Process,” Polymer Composites, 19, 71-80 (1998).
30. S. Rasch, ”Injection Compression Molding,” Technical paper, SPI Structural Plastics Conference Proceedings, 107-111 (1992).
31. S. Matsuda, A. Itoh and T. Tamura, ”Super-Precision Injection Compression Molding Technique for Plastic Lenses,” National Technical Report, 31 (1985).
32. S. Y. Yang and M. Z. Ke, “Influence of Processing on Quality of Injection- Compression-Molded Disks,” Polymer Engineering and Science, 35, 1206-1212 (1995).
33. 陳裕承,”短射壓縮成型之基本探討與應用,” 台灣大學機械研究所碩士論文, (1996).
34. C. Brockmann and W. Michaeli, “Injection Compression Molding- A Low Pressure Process for Manufacturing Textile-Covered Mouldings,” ANTEC’97, 441-445 (1997).
35. W. B. Young and C. W. Chiu, ”Study on Compression Resin Transfer Molding,” J. of Composite Material, 29, 2180-2191 (1995).
36. 楊文彬, ”Methods of Transverse Filling in Resin Transfer Molding,” 行政院國家科學委員會專題研究成果報告 NSC87-2212-E-006-097 (1998).
37. 吳政憲, ”射出-壓縮液態複材成型之分析,” 行政院國家科學委員會專題研究成果報告 NSC87-2212-E-212-009 (1998).
38. F. R. Phelan Jr., “Analysis of Injection/Compression Liquid Composite Molding Process Variance,” ASME, (1996).
39. A. W. Chan and R. J. Morgan, ”Sequential Multiple Port Injection for Resin Transfer Molding of Polymer Composite,” SAMPE Quarterly, October, 45- (1992).
40. S. Levine and G. H. Neale, “Theory of the Rate of Wetting of a Porous Medium,” Faraday Transactions 2, 71, 12-21 (1975).
41. C. Y. Chang, L. W. Hourng and C. J. Wu, “Numerical Study on the Capillary Effect of Resin Transfer Molding,” J. of Reinforced Plastics and Composites, 16, 566-586 (1997).
42. K. Han, L. J. Lee and M. Liou, “Fiber Mat Deformation in Liquid Composite Molding. II: Modeling,” Polymer Composites, 14, 151-160 (1993).
43. L. Trevino, K. Rupel, W. B. Young and M. J. Liou, “Analysis of Resin Injection Molding in Molds with Preplaced Fiber Mats. I: Permeability and Compressibility Measurements,” Polymer Composites, 12, 20-29 (1991).
44. P. D. Thomas and J. F. Middlecoff, ”Direct Control of the Grid Point Distribution in Meshes Generated by Elliptic Equation,” AIAA J., 18, 654-656 (1980)
45. L. W. Hourng and C. Y. Chang, “Numerical Simulation of Resin Transfer Molding in Molds with Preplaced Fiber Mats,” J. of Reinforced Plastics and Composites, 12, 1081-1095 (1993).
46. E. W. Washburn, “The Dynamics of Capillary Flow,” The Physical Review 2nd Series, 12, 273-283 (1921).
47. E. Bayramli and R. L. Powell, ”The Normal (Transverse) Impregnation of Liquids into Axially Oriented Fiber Bundles,” J. of Colloid and Interface Science, 138, 346-353 (1990).
48. J. Bear, Dynamics of Fluids in Porous Media, Dover Publications, New York (1972).
49. F. A. L. Dullien, Porous Media Fluid Transport and Pore Structure, Academic Press, New York (1979).
50. E. Scheidegger, The Physics of Flow through Porous Media, 3rd Ed., University of Toronto Press, Great Britain. (1974).
51. K. J. Ahn and J. C. Seferis, “Simultaneous Measurements of Permeability and Capillary pressure of Thermosetting Matrices in Woven Fabric Reinforcements,” Polymer Composites, 12 146-152 (1991).
52. 廖致欽 “轉注成型之滲透率的量測與流場之觀察”，國立中央大機械工程研究所機械論文. (1994).

指導教授

洪勵吾(Lih-Wu Hourng)

審核日期

2002-7-14

推文