| 參考文獻 |
參考文獻
[1] T. Izumitani, “Polishing mechanism of optical glasses,” Glass Technology, 12, 131, 1971.
[2] F. W. Preston,“The theory and design of plate glass polishing machines,” J. Soc. Glass Technology, 11 214, 1972.
[3] Sheng-Tsai Hsieh,” A General Optimization for Slurry Injection During Chemical Mechanical Polishing,” NCU, 2002.
[4] Sheng-Jau Chen,” Theoretical Analysis and Experiments for the Effect of Pad Pattern on the Slurry Flows and Tribological Performances Arising at the Chemical Mechanical Polishing of Cu-Film Wafers,” NCKU,2003.
[5] Jyh-Woei Jean,” Research of Flat Lapping Toolpath Analysis,” TKU, 2000.
[6] K.S. Wang, E.H. Wan and W.G. Yang, “A Preliminary investigation of New Mechanical Product Development Based on Reliability Theory,” Reliability Engineering and system Safety, Vol 40, 1993, pp.187-194.
[7] W.J. Kolarik, “Creating quality concepts systems strategies and Tools,” McGraw Hill, N. Y., 1995.
[8] 張豪麟, “系統動態可靠度與其失效率關係的探討,” 國立中央大學碩士論文, 1999.
[9] 王國雄, 沈盈志, 柏恆仁, “系統可靠度退化模式之探討,” 中華民國第一屆可靠度與維護度技術研討會論文集, pp.37-43, 1995.
[10] 林冠甫， ”新產品動態可靠度的預估,”國立中央大學碩士論文，1991
[11] 許金竹, ”預防更換對機械系統動態可靠度影響之研究,”國立中央大學碩士論文, 1993
[12] 許芳勳, ”動態可靠度模型之探討及其應用,”國立中央大學博士論文, 2001
[13] 石逸群, ”累積失效與可靠度關係之探討,”國立中央大學機械工程研究所碩士論文,2000.
[14] 徐盛峰, ”低通濾波器設計可靠度分析,”國立中央大學機械工程研究所 碩士論文,2001.
[15] M.Kaneko, and Y. Fujikawa, “Boundary search approach to parameter design for analog circuits,” Circuits and Systems, 1994. APCCAS ’94., IEEE Asia-pacific Conference, 1994.
[16] R. Spence and R. Soin, “Tolerance Design of Electronic Circuits,” New York: Addison-Wesley, 1988.
[17] 梁伯任, “材料強度退化與累積損傷之探討,”國立中央大學機械工程研究所碩士論文,2000.
[18] W.M. Smith, “Reliability and Maintainability Symposium,” 1996 Proceedings. International Symposium on Product Quality and Integrity, pp. 326-334, 1996.
[19] E. Lee, T. Wilson, “Methodology for Using Circuit Simulation in the Design and Development of Electronic Power Supplies,” IEEE Power Electronics Specialists Conference, pp. 34-45, 1992.
[20] R. White, “An Introduction to Six Sigma with A Design Example,” IEEE APEC, pp.28-35, 1992.
[21] Richard Lee, “EMI filter design,” New York, 1996.
[22] K. L. Johnson, J. A. Greenwood and S. Y. Poon, “A Simple Theory of Asperity Contact In Elastohydrodynamic Lubrication,” Wear, Vol. 19, 1972, pp.91-108.
[23] S.P. Timoshenko and J.N. Goodier, Theory of Elastic, New York, MeGraw-Hill, 1951, pp.1-404.
[24] J. Pullen and J. B. P. Williamson, “On the Plastic Contact of Roughness Surfaces,” Proc. Roy. Soc. London, 1972, Series A327, pp. 157-173.
[25] W. R. Chang, I. Etsion, D. B. Bogy, “An Elastic-Plastic Model For The Contact Of Rough Surface,” Jouranl of Tribology, April 1987, Vol. 109, pp.257-263.
[26] D. Tabor, The Hardness of metals, Oxford University Press.
[27] J.N. Siddall, “Probabilistic Engineering Design Principle and Applications,” Marcel Dekker, Inc., New York, 1983.
[28] K. Okada, and N. Onodera, “Statistical modeling of device characteristics with sys thematic fluctuation,” IEEE International Symposium, Circuits and Systems, Vol.2, pp. 437-440, 2000.
[29] Finn Jensen, “Electronic Component Reliability,” New York, 1995.
[30] M.F. Kavanaugh, “Including the effects of component tolerances in the teachin of courses in introductory circuit design,” IEEE Transactions, Education Vol.38, pp. 361-364, 1995.
[31] 王建榮,林必姚,林慶福, ”半導體平坦化CMP製程,”技術,全華圖書公司,2000 |
[Endnote RIS 格式]
[相關文章]
[文章引用]
[完整記錄]
[館藏目錄]
[檢視]
plurk
funp
live
udn
HD
myshare
netvibes
friend
youpush
delicious
baidu
Google bookmarks
del.icio.us
hemidemi
facebook
twitter
google
reddit