自動遮蔽金屬電弧焊接系統之滑動模態控制

以作者查詢圖書館館藏

、以作者查詢臺灣博碩士

、以作者查詢全國書目

、勘誤回報

、線上人數：112

、訪客IP：3.145.76.159

姓名

邱柏榮(Chiu-Po Jung) 查詢紙本館藏

畢業系所

機械工程學系

論文名稱

自動遮蔽金屬電弧焊接系統之滑動模態控制
(Automatic Shield Metal Arc Welding System of Sliding Mode Control)

相關論文

★ 自動平衡裝置在吊扇上之運用	★ 以USB通訊界面實現X-Y Table之位置控制
★ 液體平衡環在立式轉動機械上之運用	★ 液流阻尼裝置設計與特性之研究
★ 液晶電視喇叭結構共振異音研究	★ 液態自動平衡環之研究
★ 抑制牙叉式機械臂移載時產生振幅之設計	★ 立體拼圖式組合音箱共振雜音消除之設計
★ 電梯纜繩振動抑制設計研究	★ 以機器學習導入電梯生產結果預測之研究
★ 新環保冷媒R454取代R410A冷媒迴轉式單缸壓縮機效能分析與可靠性驗證	★ 高速銑削Al7475-T7351的銑削參數與基因演算法研究
★ 自動化鞋型切削機之設計與實現	★ 以FPGA為基礎之精密位置控制IC
★ CNC三維圓弧插補器	★ PID與模糊控制在營建工程自動化的探討

檔案

[Endnote RIS 格式]

[Bibtex 格式]

[相關文章]

[文章引用]

[完整記錄]

[館藏目錄]

至系統瀏覽論文 ( 永不開放)

摘要(中)

現代的各種機械加工中，焊接是一個廣泛被使用的方法。焊接仍有許多部份仍然是依靠師傅的手藝來完成；尤其是鋼管的焊接部份，遮蔽金屬電弧焊接法是最主要的方法之一。任何材料與焊接位置均可以採用此方法來焊接。
焊接的性能可以藉由適當的變頻控制而改進，還有其他的控制方法為這個目的而提出；然而，電流回饋控制在實際上的焊接過程的實現很複雜，因為它需要最佳的輸出電流參考波形，和複雜的電流控制增益調整。之前所搜尋的文獻，都把焦點放在氣體金屬電弧焊(GMAW)和亞焊(GTAW)方面的研究，雖然遮蔽金屬電弧焊接(SMAW)在焊接工業上有非常多的應用，但是這方面的研究卻很少。
在焊接過程中，困難的就是由無到有電弧的過程，以及維持穩定的電弧。本論文利用可變結構控制中的滑順模態控制，應用其穩健性：對系統外部干擾，或是系統參數隨環境變動所造成的不定量與無法或獲知的部份系統模式來克服焊接起伏的困難，達成可以順利的起伏生成穩定電弧來焊接的目的。

摘要(英)

Abstract
Welding is a generally method in the machine manufacture today. There are still a lot of welding works done by a master worker, specially welding steel tube. Alternating current shield metal arc welding (SWAW) is the one of the most important welding method. Any kind of metal materials could be welding, and any way could be used.
The welding performance can be improved by appropriate frequency conversion. There are several different control methods to improve this purpose. However, current feedback control in the real system is very complex. Searching for scientific or technical literature, there are focus on inert gas metal arc welding (GMAW) and inert gas tungsten arc welding (GTAW). Although Alternating current shield metal arc welding (SMAW) is widely used in industry, today. Research about the alternating current shield metal arc welding is less.
The most difficult part of SMAW is to produce the electric arc from shield metal and to keep the arc current stable. We use the Sliding Mode Control of Variable Structure Control theory in the automatic alternating current shield metal arc welding control system. Employing the advantages of the uncertain of parameter, disturbance, and robust of the sliding mode control theory to overcome the difficult of the electric arc producing and preserve the current stable.

關鍵字(中)

★ 滑動模態
★ 焊接
★ 控制
★ 可變結構

關鍵字(英)

★ welding
★ variable structure control
★ control
★ sliding mode

論文目次

ABSTRACT VII
CONTENTS VIII
LISTS OF FIGURES X
CHAPTER 1 INTRODUCTION 1
1.1 Motivation 1
1.2 Literature Survey 2
1.3 Organization 2
CHAPTER 2 HARDWARE FRAME 4
2.1 Overview 4
2.2 Experiment Device 5
2.2.1 Current Sensor 7
2.2.2 Peripheral Interface 8
2.2.3 A/D Converter 8
2.2.4 D/A Converter 9
2.2.5 Power Source 9
2.2.6 Control Algorithm Implementation 10
CHAPTER 3 DYNAMIC MODEL FOR THE AUTOMATIC SMAW CONTROLLING SYSTEM 11
3.1 Electrode Feed-rate Mechanism 11
3.2 System Identification 17
CHAPTER 4 CONTROLLER DESIGN 20
4.1 Overview 20
4.2 Fuzzy Control 20
4.2.1 Fuzzy PD Control 21
4.3 Sliding Mode Control 24
4.3.1 Sliding Mode method I 25
4.3.2 Sliding Mode method II 27
CHAPTER 5 RESULTS OF SIMULATION AND EXPERIMENT 30
5.1 Simulation of Controller 30
5.1.1 Fuzzy controller 30
5.1.2 Sliding Mode Controller I 31
5.1.3 Sliding Mode Controller II 32
5.2 Experiment Result 33
5.2.1 Fuzzy Controller 34
5.2.2 Sliding Mode Controller I 35
5.2.3 Sliding Mode Controller II 36
5.2.4 Hand manual experiment 38
CHAPTER 6 CONCLUSIONS AND FUTURE WORK 40
6.1 Conclusions 40
6.2 Future work 41
REFERENCE 42

參考文獻

Reference
[1] D. Smith, Welding Skills and Technology, McGraw-Hill Book Co., 1989.
[2] B.C. Howard, Modern Welding Technology, Prentice-Hall, Inc. Englewood Cliffs, 1979.
[3] 周長彬, 蔡丕椿編著, 焊接學, 全華科技圖書股份有限公司, 1993.
[4] W.H. Chu, P.C. Tung, 〝Development of an Automatic Arc Welding System Using SMAW Process〞 International Journal of Advanced Manufacturing Technology, 2004,3,9 accepted.
[5] W.H. Chu, P.C. Tung, 〝Development of an Automatic Arc Welding System Using a Sliding Mode Control〞 International Journal of Machine Tools and Manufacture Design, Research & Application 2004,3,22 accepted.
[6] Y.M. Zhang, E. Liguo, B.L. Walcott, 〝Interval model based control of gas metal arc welding〞IEEE International Conference, American Control Conference, pp. 1752-1756, Vol. 3, 1998.
[7] P. Verdelho, P. M. Silva, E. Margato, J. Esteves, 〝An electronic welder control circuit〞 IEEE International Conference, Industrial Electronics Society, pp. 612 -617 Vol. 2, 1998.
[8] H. Yamamoto, 〝The Development of Welding Control System for spatter reduction〞 Welding International, Vol.4, No.5, pp. 398-403, 1990.
[9] M. Abdelrahman, 〝Feedback linearization control of current and arc length in GMAW systems〞 IEEE International Conference, American Control Conference, pp. 1757 -1761 vol.3, 1998.
[10] B. K. Bose, Power Electronics and AC Drives, Prentice-hall, Inc. Englewood Cliffs., pp. 155-159, 1986.
[11] H. X. Li, H.B. Gatland, 〝Conventional Fuzzy Control And Its Enhancement〞IEEE Transaction On System, Vol.26, No.5, pp.791-797, October 1996.
[12] J. Y. Hung, W. Gao, and J. C. Hung, 〝Variable Structure Control: A Survey〞IEEE Transactions on Industrial Electronics, Vol. 40, No. 1, pp.2-22, February 1993.
[13] 陳永平, 張浚林編著, 可變結構控制設計, 全華科技圖書股份有限公司, 2000
[14] A.F. Filippov, Differential Equation with Discontinuous Rightsides, Kluwer Academic Publishers, Dordrecht, Boston, London, 1988.

指導教授

董必正(Pi-Cheng Tung)

審核日期

2004-7-14

推文