以作者查詢圖書館館藏 、以作者查詢臺灣博碩士 、以作者查詢全國書目 、勘誤回報 、線上人數:37 、訪客IP:3.128.79.240
姓名 劉艾香(Ai-Hsiang Liu) 查詢紙本館藏 畢業系所 光電科學與工程學系 論文名稱 利用Nsray模擬高準直導光板之分析與探討
(Using Nsray to analysize and discuss high collimated light guide)相關論文 檔案 [Endnote RIS 格式] [Bibtex 格式] [相關文章] [文章引用] [完整記錄] [館藏目錄] [檢視] [下載]
- 本電子論文使用權限為同意立即開放。
- 已達開放權限電子全文僅授權使用者為學術研究之目的,進行個人非營利性質之檢索、閱讀、列印。
- 請遵守中華民國著作權法之相關規定,切勿任意重製、散佈、改作、轉貼、播送,以免觸法。
摘要(中) 設計背光模組中的導光板及光源的反射罩,讓光源可以準直出射導光板。在LightTools裡面建立設計的模型,利用LightTools裡的Nsray(Non-Sequential Ray)功能分析光線的角度及位置,探討選定一個反射罩大小時,LED chip size對光線的影響為何,並且進行模擬,再根據分析出的結果,設計導光板Prism的角度,改善模型的架構來達到期望的目標。
摘要(英) We design the reflector of a source and the light guide of the Backlight Module to get collimated light from a light guide. We use Nsray(Non-Sequential Ray) in LightTools to analyze angle and position of light and discuss effect the LED chip size make when choosing one reflector size. We simulate our module and change it by designing prism angle on the bottom of the light guide according to the conclusion that we analyze to achieve the goal we expect.
關鍵字(中) ★ 導光板
★ 高準直關鍵字(英) ★ Nsray
★ high collimated light guide論文目次 摘 要 I
Abstract II
致 謝 III
目 錄 IV
圖 目 錄 VII
表 目 錄 XII
第一章 序論 1
1-1 前言 1
1-2 背光模組簡介 2
1-3 背光模組元件介紹 4
1-4 研究動機及目的 7
第二章 基本理論 9
2-1 折射與反射定律[4] 9
2-2 全反射定律 12
2-3 光度學 13
2-3-1 光度計量 14
2-3-2 Lambertian Law 16
2-4 拋物面鏡原理 17
2-5 反射角度推導 19
第三章 Chip中心在焦點上之模擬與討論 27
3-1 系統架構 27
3-2 Chip中心在焦點模擬 33
3-3 Nsray分析 39
3-4 結果與討論 44
第四章 Chip中心在不同位置之模擬與討論 47
4-1 Chip中心擺放的選擇 47
4-2 Chip中心放在dz=0.07處模擬 49
4-2-1 沒加導光板模擬(Receiver) 49
4-2-2 加入導光板模擬 54
4-2-3 導光板做處理模擬 56
4-3 Chip中心放在dz=-0.1處模擬 63
4-3-1 沒加導光板模擬(Receiver) 63
4-3-2 加入導光板模擬 68
4-3-3 導光板做處理模擬 70
4-4 結果與討論 78
第五章 結論與未來展望 80
參考文獻 81
附錄一 83
參考文獻 [1] 大億科技: http://www.kenmos.com.tw/。
[2] 瑞儀光電: http://www.radiant.com.tw/。
[3] 林雅蘭,「LED背光模組設計」,國立中央大學,碩士論文,民國98年。
[4] Virendra N. Mahajan, Optical imaging and aberrations, Part 1, SPIE, Washington.
[5] Yoichi Taira,et al., “Light guide apparatus ,a backlight apparatus and a liquid crystal display apparatus”, US 6667782 B1, December 2003.
[6] Evan G. Colgan,et al, “Highly collimating tapered light guide for uniform illumination of flat panel displays”, US 6648485 B1, November 2003.
[7] Robert J.Saccomanno, “Hollow cavity light guide for the distribution of collimated light to a liquid crystal display”, US 6443585 B1, September 2002.
[8] Ju-Hsin Chiang, “Brightness enhancement film”, US 2008/008934 A1, April 2008.
[9] Je Hong Kim, Jignesh Gandhi, “Light guides and backlight systems incorporating light redirections at varying densities”, US 20080094853 A1, April 2008.
[10] Sung-IL Chang,Jun-Bo Yoon, “Microlens array diffuser for a light-emitting diode backlight system”, Optics Letters, Vol.31, No.20, pp.3016-3018, October 2006.
[11] 方育彬,「LCD背光模組之光學最佳化設計」,國立成功大學,碩士論文,民國93年。
[12] 謝祥暉,「高效能導光板之微結構排列設計與分析」,私立大葉大學,碩士論文,民國95年。
指導教授 孫文信(Wen-Hsin Sun) 審核日期 2009-10-13 推文 facebook plurk twitter funp google live udn HD myshare reddit netvibes friend youpush delicious baidu 網路書籤 Google bookmarks del.icio.us hemidemi myshare