NURBS曲面編修與平滑化技術

以作者查詢圖書館館藏

、以作者查詢臺灣博碩士

、以作者查詢全國書目

、勘誤回報

、線上人數：47

、訪客IP：3.141.29.90

姓名

陳守恒(Shou-Heng Chen) 查詢紙本館藏

畢業系所

機械工程學系

論文名稱

NURBS曲面編修與平滑化技術
(NURBS Shape Modification and Fairing)

相關論文

★ 光纖通訊主動元件之光收發模組由上而下CAD模型設計流程探討	★ 汽車鈑金焊接之夾治具精度分析與改善
★ 輪胎模具反型加工路徑規劃之整合研究	★ 自動化活塞扣環壓入設備之開發
★ 光學鏡片模具設計製造與射出成形最佳化研究	★ CAD模型基礎擠出物之實體網格自動化建構技術發展
★ 塑膠射出薄殼件之CAD模型凸起面特徵辨識與分模應用技術發展	★ 塑膠射出成型之薄殼件中肋與管設計可製造化分析與設計變更技術研究
★ 以二維影像重建三維彩色模型之色彩紋理貼圖技術與三維模型重建系統發展	★ 結合田口法與反應曲面法之光學鏡片射出成型製程參數最佳化分析
★ 薄殼零件薄殼本體之結構化實體網格自動建構技術發展	★ Boss特徵之結構化實體網格自動化建構技術發展
★ 應用於模流分析之薄殼元件CAD模型特徵辨識與分解技術發展	★ 實體網格建構對於塑膠光學元件模流分析之影響探討
★ 螺槳葉片逆向工程CAD模型重建與檢測	★ 電腦輔助紋理影像辨識與點資料視覺化研究

檔案

[Endnote RIS 格式]

[Bibtex 格式]

[相關文章]

[文章引用]

[完整記錄]

[館藏目錄]

[檢視]

[下載]

本電子論文使用權限為同意立即開放。
已達開放權限電子全文僅授權使用者為學術研究之目的，進行個人非營利性質之檢索、閱讀、列印。
請遵守中華民國著作權法之相關規定，切勿任意重製、散佈、改作、轉貼、播送，以免觸法。

摘要(中)

在整個CAD模型的建構過程當中，自由曲面造型所佔的比例越來越重，同時，為了因應各種原因，去要求自由曲面的造型必需能夠局部的自由加以變更，使其符合各式設計需求，為目前熱門的討論主題。本論文的目的在於提出一套曲面自由編修(Free-form deformation)的演算法，並且能夠達到設計變更的目的，另外也探討曲面平滑(Fairing)的主題，以求在編修的同時，能夠得到較佳的曲面品質。
首先基於NURBS的數學模型來作分析，將其在曲面變更時所求出的各式解之限制條件以及改善方法作一討論。接著配合最佳解演算法來做為曲面變更的核心，最後在以拘束條件的加入方法作為最後的步驟。經由以上所提出的演算法，將能夠提供一個曲面造型編修技術的基礎流程。

摘要(英)

In CAD modeling Systems, the proportion of Free-Form surface is heavier and heavier. Meanwhile, in order to solve various kinds of demands of designing, we have to change ordinary CAD model. The purpose of this research lies in proposing an algorithm and procedure of NURBS shape deformation, via various combination of constrain condition to control shape deformation. At first, we do analysis of NURBS mathematics model and construct various types of limiting conditions. Then three kinds of methods be proposed, for improve limiting conditions before shape operation. When we start to determine shape parameter of modification, this paper presents an optimization algorithm method. It is the core of whole procedure. Second step, we can not only use basic shape modification function but also combine the constrained condition. At the end step, further fairing methods were used to improve shape quality in shape modification process.Based on this discussion, provide a integrated procedure for shape modification method by means of which one can control shape arbitrarily.

關鍵字(中)

★ 曲面編修
★ 拘束最佳化
★ 曲面平滑
★ 自由曲面造型
★ NURBS

關鍵字(英)

★ Constrained Optimization
★ NURBS
★ Free-Form Deformation
★ Shape Modification
★ Shape Fairing

論文目次

摘要.......................................... I
英文摘要..................................... II
致謝........................................ III
目錄......................................... IV
圖目錄........................................VI
表目錄..................................... VIII
第一章緒論....................................1
1.1 前言.......................................1
1.2 文獻回顧...................................2
1.3 研究目的...................................6
1.4 論文架構...................................7
第二章曲面自由造型編修方法流程................9
2.1 前言.......................................9
2.2 NURBS之曲面編修............................9
2.3 曲面編修流程..............................12
2.3.1 決定曲面UV值............................15
2.3.2 判斷限制條件............................15
2.3.3 改善限制條件............................20
第三章曲面自由造型編修演算法.................26
3.1 前言......................................26
3.2 基本曲面編方法............................27
3.3 參數最佳化演算法..........................34
3.4 曲面編修方法推導與應用延伸................37
3.5 結論......................................41
第四章曲面品質改善方法.......................42
4.1 前言......................................42
4.2 各式曲面品質量化介紹......................43
4.3 曲面品質量化於平滑化......................45
4.4 Lagrange 乘數法與曲面品質改善.............58
4.5 曲面編修與品質考量........................64
第五章範例與應用說明.........................70
5.1 目前市面上軟體之曲面編修功能..............70
5.2 本研究之各式編修方法......................81
5.3 綜合比較與整理............................93
第六章結論與未來展望.........................94
6.1 結論......................................94
6.2 未來展望..................................96
參考文獻......................................98

參考文獻

[1] L. Piegl, “Modifying the Shape or Rational B-spline. Part 1 :Curves”, Computer Aided Design, 21, 509-18, 1989
[2] L. Piegl, “Modifying the Shape or Rational B-spline. Part 1 :Surfaces”, Computer Aided Design, 21, 538-46, 1989
[3] L. Piegl and W. Tiller, “The NURBS Book”, Springer, Berlin, 1995
[4] C. K. Au and M. M. F. Yuen, “Unified Approach to NURBS Curve Shape Modification”, Computer Aided Design, Vol. 27, No. 2, pp. 85-93, Jan. 1995
[5] J. Sànchez-Reyes, “A Simple Technique for NURBS Shape Modification”, IEEE Computer Graphics and Applications, 17-1, 52-59, 1997
[6] C. Celniker and W. Welch, “Linear Constrains for Deformable B-spline Surfaces”, Proceedings of the Symposium on Interactive 3D Graphics, vol. 25(2), p.165-70, Computer Graphs, Boston, 1992
[7] J. M. Zheng, K. W. Chan and I. Gibson, A New Approach for Direct Manipulation of Free-form Curve”, Computer Graphics Forum, 17-3, 328-34, 1998
[8] S. M. Hu, T. F. Li, T. Ju and X. Zhu, “Modifying the Shape of NURBS Surfaces with Geometric Constraints”, Computer Aided Design 33, 903-912, 2001
[9] M. Hoffmann and I. Juhasz, “The Effect of Knot Modifications on the Shape of B-spline Curves”, Geometry Graphics 5, 111-119, 2001
[10] M. Hoffmann and I. Juhasz, “Shape Control of Cubic B-spline and NURBS Curves by Knot Modifications”, Information Visualization, Proceedings. Fifth International Conference, No. 25-27, 63-68, July 2001
[11] M. Hoffmann and I. Juhasz, “Geometric Aspects of Knot Modification of B-spline Surfaces”, Journal for Geometry and Graphics, Vol. 6, No. 2, 114-149, 2001
[12] I. Juhasz, “Weight-based Shape Modification of NURBS Curves”, Computer Aided Geometric Design 16 , 377–383, 1999
[13] Y.vChen, K. P. Beier and D. Papageorgiou, “Direct Highlight Line Modification on NURBS Surfaces”, Computer Aided Geometry Design, 14(6), 583–601, 1997
[14] C. Zhang and F. Cheng, “Removing Local Irregularities of NURBS Surfaces by Modifying Highlight Lines”, Computer Aided Design, 30(12), 923–30, 1998
[15] J. H. Yong, F. Chenga, Y. Chenb, P. Stewartb and K. T. Miurac, “Dynamic Highlight Line Generation for Locally Ddeforming NURBS Surfaces”, Computer-Aided Design, No.35, 881–892, 2003
[16] S. Hahmann, “Shape Improvement of Surfaces”, Journal of Computing, 1998
[17] J. F. Poliakoff, “An improved Algorithm for Automatic Fairing of Non-uniform Parametric Cubic Splines”, Computer Aided Design,
Vol.28, No.1, pp59-66, 1996
[18] G. Greiner, P. Launent, A. Le Méhauté, L. Schumaker, “Surface Construction Based on Variational principles”, Wavelets, Images and
Surface Fitting, A. K. Peters, Wellesley, MA.
[19] M. Kimura, T. Saito and M. Shinya, “Surface Deformation with Differential Geometric Structures”, Computer Aided Geometric Design,
No.13, pp.243-256, 1996
[20] W. H. Press, B. P. Flannery, S. A. Teukolsky and W. T. Vetterling,“Numerical Recipes in C: The Art of Scientific Computing”, Cambridge, New York, 1992
[21] 賴景義, 翁文德, “逆向工程理論與應用”, 全華科技圖書股份有限公司, 台北, 2004
[22] J. A. Kjellander, “Smoothing of Bicubic Parametric Surfaces”,
Computer Aided Design, No.15, pp289-293, 1983

指導教授

賴景義(Jiing-Yih Lai)

審核日期

2005-7-11

推文