TFT-LCD前框卡勾設計之衝擊模擬分析與驗證研究

以作者查詢圖書館館藏

、以作者查詢臺灣博碩士

、以作者查詢全國書目

、勘誤回報

、線上人數：33

、訪客IP：3.15.221.67

姓名

黃永立(Yung-Li Huang) 查詢紙本館藏

畢業系所

機械工程學系在職專班

論文名稱

TFT-LCD前框卡勾設計之衝擊模擬分析與驗證研究

相關論文

★ TFT-LCD 導光板衝擊模擬分析及驗證研究	★ 數位機上盒掉落模擬分析及驗證研究
★ 旋轉機械狀態監測-以傳動系統測試平台為例	★ 發射室空腔模態分析在噪音控制之應用暨結構聲輻射效能探討
★ 時頻分析於機械動態訊號之應用	★ VKF階次追蹤之探討與應用
★ 火箭發射多通道主動噪音控制暨三種線上鑑別方式	★ TFT-LCD衝擊模擬分析及驗證研究
★ TFT-LCD掉落模擬分析及驗證研究	★ TFT-LCD螢幕掉落破壞分析驗證與包裝系統設計
★ 主動式火箭發射噪音控制使用可變因子演算法	★ 醫學/動態訊號處理於ECG之應用
★ 光碟機之動態研究與適應性尋軌誤差改善	★ 具新型菲涅爾透鏡之超音波微噴墨器分析與設計
★ 醫用近紅外光光電量測系統之設計與驗証	★ 車用DVD光碟機之適應性聚焦伺服控制實現與應用

檔案

[Endnote RIS 格式]

[Bibtex 格式]

[相關文章]

[文章引用]

[完整記錄]

[館藏目錄]

至系統瀏覽論文 ( 永不開放)

摘要(中)

產品在運輸、搬運或使用過程中會承受到各種形式的衝擊，隨著電子類產品輕薄化的趨勢，衝擊試驗對電子類產品產生的影響亦隨之增加，通常廠商會於產品開發階段進行衝擊測試以驗證產品強度，確保產品出貨至客戶端甚至是使用者實際使用時不致損壞。本研究即是以TFT-LCD模組為研究對象，針對TFT-LCD模組於衝擊試驗時經常發生的前框卡勾跳脫問題進行分析與探討，研究中以有限元素法進行數值模擬，並與實驗數據進行比對，獲得有效之分析模型，依此建立完整的衝擊試驗數值模擬及分析模式。
研究中採用兩種方式進行，即衝擊試驗驗証與有限元素模擬分析，透過相互印証，探討TFT-LCD模組受衝擊時之動態行為，對前框卡勾設計提出適切改善。研究中使用有限元素軟體MSC-Dytran對TFT-LCD模組進行衝擊模擬分析，預測TFT-LCD模組衝擊時整體的力學行為，並與實驗結果比較進行分析模型修正，以驗證有限元素模型之正確性。在有限元素模型經合理性驗證後，對TFT-LCD模組前框卡勾進行設計改善，透過材料厚度變更及增加補強肋設計的改善提案，解決此卡勾跳脫的問題，並依此建立TFT-LCD模組前框卡勾設計的分析評估方式。
以本文所採用之分析評估模式，可有效預測產品於衝擊試驗中之衝擊行為，幫助設計者於開發初期預估產品強度、發掘並改善問題，以縮短設計開發時程及降低成本，進而提高產業競爭力。

摘要(英)

Products are subjected to different kinds of impact during transportation, shipping and operation. With the trends of electronic products turning diminutive, the raise of impact test to the electronic products has also being raised. It is now, considered a norm that manufacturers will conduct the impact test during the period of manufacturing and developing in order to insure that goods will be delivered to the various vendors or the final end-users in a excellent condition for usage.
This empirical research took TFT-LCD modules as subjects, paying particular attention in analyzing and discussing the issue of bezel “snapping”, a problem which frequently occur during the module under impact test. The research was conducted with the finite element analysis model for examination and then compared to the experimental results in order to obtain effective analysis. Thus, we could establish completely impact test value simulation and analysis pattern.
This study carried on two experimental methods — the impact test for examination and the finite element analysis model. Through the finite element analysis and experiment for truth examination of TFT-LCD module during impact test, we proposed the adequate design improvement for bezel design. In experiment, the simulation of impact test on the TFT-LCD module was analyzed by MSC-Dytran finite element software which could predict the whole dynamic action of TFT-LCD module during impact test and compared to the experimental results to modify the analysis model and examined the accuracy of the finite element analysis model. After the finite element model was verified effectively, we did improve the design on the bezel snap of the TFT-LCD module by changed the item thickness and increased the rib design methods to solve the “snapping” problem. And we established the analysis evaluation methods of the design on the bezel snap of the TFT-LCD module.
The analyzed evaluated model adopted in this study can severely predict the impact response of products during impact test. Thus it can help designers develop and pre-estimate the product strength and also improve to solve the problems with the purpose to shorten design duration and reduce cost and exalt the industry competence.

關鍵字(中)

★ 有限元素分析
★ 衝擊測試

關鍵字(英)

★ Finite element
★ Shock

論文目次

摘要 I
Abstract II
誌謝 III
目錄 IV
圖目錄 VI
表目錄 IX
第一章緒論 1
1.1 研究動機與目的 1
1.2 文獻回顧 2
1.3 研究範圍 3
1.4 研究架構 3
第二章理論基礎 5
2.1 衝擊理論 5
(1) 衝擊反應模式 5
(2) 脈衝衝擊 7
2.2 有限元素法應用於衝擊分析 9
第三章衝擊試驗 12
3.1 試驗設備 12
3.2 試驗方法與流程 18
3.3 試驗結果 18
第四章衝擊模擬分析 23
4.1 有限元素模型 23
4.2 結構件材料性質 27
4.3 鎖附邊界條件 28
4.4 模擬結果與試驗比對 30
第五章設計改善 38
5.1 金屬前框卡勾跳脫機制探討 38
5.2 金屬前框厚度變更探討 44
5.3 卡勾處補強探討 46
第六章結論與建議 49
參考文獻 50
附錄一 52

參考文獻

T. Belyschko, W.K. Liu and Moran Brian, 2000, "Nonlinear finite elements for continua and structures," John Wiley & Sons, Inc., New York.
C.K. Chang, 2004, "The FEM Analysis for Mold Frame Design of TFT-LCD Module," Proceedings of the 2004 MSC.Software Conference.
A.K. Chopra, 1995, "Dynamics of structures," Prentice Hall, Inc., New Jersey.
S.S. Choi, E. Kang and D.C. Kim, 1998, "Drop impact simulation for optimum design of TFT-LCD," Proceedings of the IEEE Intersociety Conference on Thermal Phenomena in Electronic Systems, pp.2-11.
S.S. Choi, J.G. Lee, 2003, "Structural design review of LCD-TV module by impact analysis," Proceedings of the 2003 4th European LS-DYNA User Conference, pp.GII-01-09.
K.D. Ha, D.W. Kim and J.K. In, "Prediction of CRT Shock Test and Design Improvement for Shock Resistance," Proceedings of the SID 2000, pp.952-955.
J.D. Helfinstine, S. T. Gulati, J. F. Bayne, W. R. Powell and J. C. Lapp, 2004, "Mechanical reliability of LCD panels under dynamic loading," Proceedings of the SID 2004, pp.1597-1599.
J.D. Helfinstine, S. T. Gulati, J. F. Bayne, W. R. Powell and J. C. Lapp, 2004, "Mechanical reliability of LCD panels under static loading," Proceedings of the SID 2004, pp.1593-1596.
R.C. Junival, 1967, "Stress Strain and Strength," Mc-Graw-Hill, pp.79-80.
C.S. Kim, K.B. Shin, S.W. Booh and W.Y. Soh, 2002, "The Simulation Based Drop/Impact Design of PDP Module," Proceedings of the SID 2002, pp.737-739.
D.W. Kim, I.S. Cho and K.S. Lee, 2004, "Computational shape optimization for strength improvement of 42 in. PDP aluminum chassis with Al. reinforcement," Proceedings of the SID 2004, pp1600-1603.
J.H. Kim,K.H. Song and W.Y. Soh, "A New Shadow Mask Assembly Improved the Impact Strength," Proceedings of the SID 2001, pp.1219-1221.
N.H. Nan and C.C. Huang, 2005, "The FEM analysis for LCD module of clammer-type handset during drop," Proceedings of the 2005 MSC.Software Conference.
M.C. Pan, P.C. Chen and Johnson Ho, 2003, "Drop Simulation and Experiment Validation of TFT-LCD Monitors," Proceedings of the Electronics Packaging Technology Coference 2003, pp.269-274.
S. S. Rao, 1995, "Mechanical vibration," Addison-Wesley, Inc., New York.
D. S. Steinberg, 1988,"Vibration analysis for electronic equipment," John Wiley & Sons, Inc., New York.
T.Y. Tee, J.E. Luan, Eric Pek, C.T. Lim and Z.W. Zhong, 2004, "Noval numerical and experimental analysis of dynamic responses under board level drop test," Proceedings of the 5th Int. Conf. on Thermal and Mechanical Simulation and Experiments in Micro-electronics and Micro-system, EuroSimE2004, pp.133-140.
MSC.Drtran Reference Manual.
章秀鑫, 2002, "TFT-LCD模組設計概論," 全華科技圖書.
陳伯群, 2003, "TFT-LCD掉落模擬分析及驗證研究," 國立中央大學碩士論文.
陳君明, 2003, "TFT-LCD衝擊模擬分析及驗證研究," 國立中央大學碩士論文.

指導教授

潘敏俊(Min-Chun Pan)

審核日期

2007-7-23

推文