平板式固態氧化物燃料電池使用雲母封裝材料之熱應力分析

以作者查詢圖書館館藏

、以作者查詢臺灣博碩士

、以作者查詢全國書目

、勘誤回報

、線上人數：32

、訪客IP：18.218.38.67

姓名

陳安信(An-Hsin Chen) 查詢紙本館藏

畢業系所

機械工程學系

論文名稱

平板式固態氧化物燃料電池使用雲母封裝材料之熱應力分析
(Thermal Stress Analysis of a Planar SOFC Stack with Mica Sealants)

相關論文

★ 晶圓針測參數實驗與模擬分析	★ 車銑複合加工機床面結構最佳化設計
★ 精密空調冷凝器軸流風扇葉片結構分析	★ 第四代雙倍資料率同步動態隨機存取記憶體連接器應力與最佳化分析
★ PCB電性測試針盤最佳鑽孔加工條件分析	★ 鋰-鋁基及鋰-氮基複合儲氫材料之製程開發及研究
★ 合金元素(錳與鋁)與球磨處理對Mg2Ni型儲氫合金放電容量與循環壽命之影響	★ 鍶改良劑、旋壓成型及熱處理對A356鋁合金磨耗腐蝕性質之影響
★ 核電廠元件疲勞壽命模擬分析	★ 可撓式OLED封裝薄膜和ITO薄膜彎曲行為分析
★ MOCVD玻璃承載盤溫度場分析	★ 不同環境下之沃斯回火球墨鑄鐵疲勞裂縫成長行為
★ 不同環境下之Custom 450不銹鋼腐蝕疲勞性質研究	★ AISI 347不銹鋼腐蝕疲勞行為
★ 環境因素對沃斯回火球墨鑄鐵高週疲勞之影響	★ AISI 347不銹鋼在不同應力比及頻率下之腐蝕疲勞行為

檔案

[Endnote RIS 格式]

[Bibtex 格式]

[相關文章]

[文章引用]

[完整記錄]

[館藏目錄]

[檢視]

[下載]

本電子論文使用權限為同意立即開放。
已達開放權限電子全文僅授權使用者為學術研究之目的，進行個人非營利性質之檢索、閱讀、列印。
請遵守中華民國著作權法之相關規定，切勿任意重製、散佈、改作、轉貼、播送，以免觸法。

摘要(中)

本研究目的在使用有限元素分析法(FEA)分析平板式固態氧化物燃料電池(SOFC)使用雲母封裝材料在運作流程中之熱應力分佈。首先，利用電化學及熱傳分析產生含三層單元電池之SOFC電池堆在各個階段的溫度分佈圖，然後將這些獲得的溫度場輸入此三維三層電池堆的有限元素模型中，每個單元電池基本上都包含了電池板(PEN)、金屬連接板、鎳網、封裝玻璃陶瓷以及雲母封裝材料。在以往的研究中，雲母封裝材料的結構功能並未被考慮，因此，為了提供更接近實際情況的熱應力分析結果，本研究所建立之三層電池堆有限元素分析模型將包含雲母封裝材料，特別是將比較使用玻璃陶瓷與使用雲母封裝材料、不同裝配溫度以及雲母材料楊氏係數不同對電池堆熱應力分佈的影響。
分析結果顯示，不同的裝配溫度只對於在裝配後的熱應力分佈有影響。當裝配溫度從200上升到400 oC，隨著裝配溫度的上升，裝配後在室溫下的熱應力也伴隨上升，但對於運轉階段及停機狀態下的熱應力分佈影響不大。將雲母封裝材料的兩個不同楊氏係數輸入模型進行分析，發現改變雲母的楊氏係數只對於雲母封裝材料的熱應力有顯著影響，對於其他元件的熱應力分佈幾乎沒有影響。與先前全部使用玻璃陶瓷作為封裝材料之熱應力分佈比較，使用雲母封裝材料在裝配後及停機狀態，各元件之熱應力值比較小；但在運轉階段，則有相對較大的熱應力。而全部使用封裝玻璃設計的部分，在穩態工作狀態下有較低的熱應力值而在裝配後及停機狀態下的熱應力值較高。兩種不同封裝設計之熱應力值呈現相反的趨勢。

摘要(英)

The aim of this study is, by using finite element analysis (FEA), to characterize the thermal stress distribution in a planar solid oxide fuel cell (SOFC) stack with a compressive sealing design at various stages. The temperature profiles generated by an integrated thermo-electrochemical model were applied to calculate the thermal stress distributions in a multiple-cell SOFC stack by using a three-dimensional (3-D) FEA model. The constructed 3-D FEA model consists of the complete components used in a practical SOFC stack, including positive electrode-electrolyte-negative electrode (PEN) assembly, interconnect, nickel mesh, glass-ceramic seals, and compressive mica seals. Incorporation of the compressive mica sealant, which was never considered in previous studies, into the 3-D FEA model would produce more realistic results in thermal stress analysis and enhance the reliability of predicting potential failure locations in an SOFC stack. The stress fields at different assembly temperatures and the effect of anisotropic elastic moduli of mica sealant were investigated.
The thermal stresses in each component at room temperature after assembly were increased when the assembly temperature was increased form 200 oC to 300 and 400 oC. However, the assembly temperature did not affect the thermal stress distributions significantly at steady-operation and shutdown stages. Two different elastic moduli of mica material were used in the FEA model and the simulation results indicated that the critical stresses in each component at a specific stage were comparable except for the mica sealants. Thermal stress distributions obtained in the current study were also made a comparison with those in a rigid-bonding sealing design. The thermal stresses in each component were larger at the after-assembly and shutdown stages but lower in the operation condition for the rigid-bonding type of sealing design. That trend of stress distribution was opposite to that for a compressive sealing design used in the current study.

關鍵字(中)

★ 熱應力分析
★ 固態氧化物燃料電池
★ 雲母封裝材料

關鍵字(英)

★ mica sealant
★ stress analysis
★ SOFC

論文目次

TABLE OF CONTENTS
LIST OF TABLES......IV
LIST OF FIGURES......V
1.INTRODUCTION.........................................1
1.1 Solid Oxide Fuel Cell.................1
1.2 Components of a SOFC..................3
1.2.1 Anode..........4
1.2.2 Cathode........5
1.2.3 Electrolyte....5
1.2.4 Interconnect...6
1.2.5 Sealant........7
1.3 Thermal Stresses in Planar SOFC.......9
1.4 Purpose and Scope....................11
2.MODELING.............................................13
2.1 Finite Element Model.................13
2.2 Material Properties..................14
2.3 Boundary and Constrained Conditions..16
2.4 Temperature Profiles.................16
2.5 Investigated Cases...................17
2.6 Failure Criteria.....................19
3.RESULTS AND DISCUSSION...............................21
3.1 Stress Fields at Different Assembly Temperatures ....................................21
3.2 Effect of Anisotropic Elastic Moduli of Mica
Sealant..............................25
3.3 Comparison of Thermal Stresses in Different
Sealing Designs......................26
4.CONCLUSIONS.........................................28
REFERENCES............................................30
TABLES................................................33
FIGURES...............................................37

參考文獻

1. K. J. Daun, S. B. Beale, F. Liu and G. J. Smallwood, “Radiation Heat Transfer in
Planar SOFC Electrolytes,” Journal of Power Sources, Vol. 157, 2006, pp. 302-310.
2. H. Apfel, M. Rzepk, H. Tu and U. Stimming, “Thermal Start-Up Behaviour and
Thermal Management of SOFCs,” Journal of Power Sources, Vol. 154, 2006, pp.
370-378.
3. K. Kendall, N. Q. Minh, and S. C. Singhal, “Cell and Stack Designs,” Chapter 8 in
High Temperature Solid Oxide Fuel Cells: Fundamentals, Design and Applications,
edited by S. C. Singhal and K. Kendall, Elsevier, Kidlington, UK, 2003.
4. W. Z. Zhu and S. C. Deevi, “A Review on the Status of Anode Materials for Solid
Oxide Fuel Cells,” Materials Science and Engineering, Vol. A362, 2003, pp. 228-239.
5. T. L. Wen, D. Wang, M. Chen, H. Tu, Z. Lu, Z. Zhang, H. Nie, and W. Huang,
“Material Research for Planar SOFC Stack,” Solid State Ionics, Vol. 148, 2002, pp.
513-519.
6. H. Yokokawa, N. Sakai, T. Horita, and K. Yamaji, “Recent Developments in Solid
Oxide Fuel Cell Materials,” Fuel Cells, Vol. 1, 2001, pp. 117-131.
7. R. M. Ormerod, “Solid Oxide Fuel Cells,” Chemical Society Reviews, Vol. 32, 2003,
pp. 17-28.
8. H. C. Yu and K. Z. Fung, “Electrode Properties of La1-xSrxCuO2.5-δ as New Cathode
Materials for Intermediate-Temperature SOFCs,” Journal of Power Sources, Vol. 133,
2004, pp. 162-168.
9. H. U. Anderson and F. Tietz, “Interconnects,” Chapter 7 in High Temperature Solid
Oxide Fuel Cells: Fundamentals, Design and Applications, edited by S. C. Singhal
and K. Kendall, Elsevier, Kidlington, UK, 2003.
10. K. Hilpert, D. Das, M. Miller, D. H. Peck, and R. Wei, “Chromium Vapor Species over
Solid Oxide Fuel Cell Interconnect Materials and Their Potential for Degradation
Processes,” Journal of the Electrochemical Society, Vol. 143, 1996, pp. 3642-3647.
11. J. W. Fergus, “Sealants for Solid Oxide Fuel Cells,” Journal of Power Sources, Vol.
147, 2005, pp. 46-57.
12. S. B. Sohn and S. Y. Choi, “Suitable Glass-Ceramic Sealant for Planar Solid-Oxide
Fuel Cells,” Journal of the American Ceramic Society, Vol. 87 , 2004, pp. 254-260.
13. K. L. Ley, M. Krumpelt, R. Kumar, J. H. Meiser, and I. Bloom, “Glass-Ceramic
Sealants for Solid Oxide Fuel Cells: Part I, Physical Properties,” Journal of
Materials Research, Vol. 11, 1996, pp. 1489-1493.
14. S. P. Simner and J. W. Stevenson, “Compressive Mica Seals for SOFC Applications,”
Journal of Power Sources, Vol. 102, 2001, pp. 310-316.
15. K. P. Recknagle, R. E. Williford, L. A. Chick, D. R. Rector, and M. A. Khaleel,
“Three-Dimensional Thermo-Fluid Electrochemical Modeling of Planar SOFC
Stacks,” Journal of Power Sources, Vol. 113, 2003, pp. 109-114.
16. C. S. Montross, H. Yokokawa, and M. Dokiya, “Thermal Stresses in Planar Solid
Oxide Fuel Cells due to Thermal Expansion Differences,” British Ceramic
Transactions, Vol. 101, 2002, pp. 85-93.
17. A. Selimovic, M. Kemm, T. Torisson, and M. Assadi, “Steady State and Transient
Theraml Stress Analysis in Planar Solid Oxide Fuel Cells,” Journal of Power Sources,
Vol. 145, 2005, pp. 463-469.
18. H. Yakabe, Y. Baba, T. Sakurai, and Y. Yoshitaka, “Evaluation of the Residual Stress
for Anode-Supported SOFCs,” Journal of Power Sources, Vol. 135, 2004, pp. 9-16.
19. H. Yakabe, Y Baba, T. Sakurai, M. Satoh, I. Hirosawa, and Y. Yoda, “Evaluation of
Residual Stresses in a SOFC Stack,” Journal of Power Sources, Vol. 131, 2004, pp.
278-284.
20. W. Fischer, J. Malzbender, G. Blass, and R. W. Steinbrech, “Residual Stresses in Planar
Solid Oxide Fuel Cells,” Journal of Power Sources, Vol. 150, 2005, pp. 73-77.
21. C.-K. Lin, T.-T. Chen, Y.-P. Chyou, L.-K. Chiang, ”Thermal Stress Analysis of a
Planar SOFC Stack,” Journal of Power Sources, Vol. 164, 2007, pp. 238-251.
22. Y. P. Chyou, T. D. Chung, J. S. Chen, and R. F. Shie, “Integrated Thermal Engineering
Analyses with Heat Transfer at Periphery of Planar Solid Oxide Fuel Cell,” Journal of
Power Sources, Vol. 139, 2005, pp. 126-140.
23. “Structural Elements,” Chapter 15 in ABAQUS Analysis User’s Manual V6.5,
ABAQUS, Inc., Rising Sun Mills, USA, 2004.
24. K. S. Weil, J. E. Deibler, J. S. Hardy, D. S. Kim, G.-G. Xia, L. A. Chick, and C. A.
Coyle, “Rupture Testing as a Tool for Developing Planar Solid Fuel Cell Seals,”
Journal of Material Engineering and Performance, Vol. 13, 2004, pp. 316-326.
25. B. N. Nguyen, B. J. Koeppel, S. Ahzi, M. A. Khallel, and P. Singh, “Crack Growth in
Solid Oxide Fuel Cell Materials: From Discrete to Continuum Damage Modeling,”
Journal of the American Ceramic Society, Vol. 89, 2006, pp. 1358-2368.
26. N. P. Bansal and E. A. Gamble, “Crystallization Kinetics of a Solid Oxide Fuel Cell
Seal Glass by Differential Thermal Analysis,” Journal of Power Sources, Vol. 147,
2005, pp. 107-155.
27. S. Habrlitz, G. Carl, C. Rüssel, S. Thiel, U. Gerth, J.-D. Schnapp, A. Jordanov, and H.
Knake, “Mechanical Properties of Oriented Mica Glass Ceramic,” Journal of
Non-Crystalline Solids, Vol. 220, 1997, pp. 291-298.
28. Metals Handbook, 10th Ed., Vol. 2, ASM International, Materials Park, OH, 1990, pp.
437-441.
29. W. Koster, “The Temperature Dependence of the Elasticity Modulus of Pure Metals,”
Zeitschrift fur Metallkunde, Vol. 39, 1948, pp. 1-9. (in German)
30. Y.-S. Chou and J. W. Stevenson, “Phlogopite Mica-based Compressive Seals for Solid
Oxide Fuel Cells: Effect of Mica Thickness,” Journal of Power Sources, Vol. 124,
2003, pp. 473-478.
31. J. Malzbender, R. W. Steinbrech, and L. Singhesier, “Failure Probability of Solid
Oxide Fuel Cells,” pp. 293-298 in Proceedings of the 29th International Conference
on Advanced Ceramics and Composites, January 23-28, Cocoa Beach, Florida, 2005.
32. N. P. Bansal, J. B. Hurst, and S. R. Choi, “Boron Nitride Nanotubes-Reinforced Glass
Comosites,” Journal of the American Ceramic Society, Vol. 89, 2006, pp. 388-390.

指導教授

林志光(Chih-Kuang Lin)

審核日期

2007-7-19

推文