人體膝關節之高度彎曲電腦動態實體模型的建立

以作者查詢圖書館館藏

、以作者查詢臺灣博碩士

、以作者查詢全國書目

、勘誤回報

、線上人數：16

、訪客IP：18.119.125.240

姓名

王裕民(Yu-Ming Wang) 查詢紙本館藏

畢業系所

機械工程學系

論文名稱

人體膝關節之高度彎曲電腦動態實體模型的建立
(Development of Dynamic Model for Posterior-stabilized Knee Prosthesis)

相關論文

★ 高彎曲度之人工膝關節多軸向動態磨耗試驗機開發	★ 人工髖關節雙軸向動態磨耗試驗平台開發
★ 大型犬人工髖關節之應力分析	★ 足型與足壓電腦輔助分析系統開發
★ 超低溫液態氮生物試片儲存槽的研發	★ 腰椎人工椎間盤之運動軌跡分析
★ 表面置換型人工臏股骨關節的設計與分析	★ 二維及三維足型的應用與高跟鞋足壓的量測分析
★ 心血管支架塑性成形的有限元素分析	★ 靜態穿椎弓足內固定器之剛性對腰椎受力之影響
★ 腰椎內固定器之動態型式的生物力學評估	★ 超低溫高安全性生物試片儲存槽與即時監管理系統之開發
★ 超低溫液態氮生物試片儲存系統的硬體研發	★ 拇趾外翻足的鞋內矯正器之設計與評估
★ 表面置換型單髁人工膝關節的設計與分析	★ 髕股骨人工關節之動靜態分析與測試

檔案

[Endnote RIS 格式]

[Bibtex 格式]

[相關文章]

[文章引用]

[完整記錄]

[館藏目錄]

至系統瀏覽論文 ( 永不開放)

摘要(中)

目前探討後方穩定型人工膝關節於高彎曲時其Cam-Post接觸情形的文獻相當缺乏。因此本研究目的，期望能建立一套電腦模擬平台，進而以了解Cam-Post於高彎曲時其接觸的情形。
本研究是利用X光斷層掃描影像重建其骨頭模型再用繪圖軟體(SolidWorks)繪製出後方穩定型之人工膝關節。本模型是以彈簧代替韌帶的方式，運用動態模擬軟體(COSMOS Motion)來模擬高度彎曲的運動情形。
本研究之完成，可以達成下列兩個目標：(1)確切的模擬人工膝關節的高彎曲運動行為；(2)預測Cam與Post之間的接觸情形。

摘要(英)

As the high flexion research of the knee has become a new studying interest, the understanding for dynamic contact force for the posterior-stabilized type total knee replacement in a high flexion angle is still lacking. The objective of this study is to create a model to simulate and the dynamic contact force for the posterior-stabilized type total knee replacement in a high flexion angle.
The artificial knee model is constructed by the computed tomography (CT) image of human knee joints using the SolidWorks software. The motion of the knee joints were simulated using the spring instead of the ligament models.
The methodology will contribute to an effective modeling for the knee joint in extreme flexions and predict the distribution of contact force between Cam and Post.

關鍵字(中)

★ 高度彎曲動態分析
★ 電腦模型
★ 人工膝關節

關鍵字(英)

★ high-flexion analysis
★ total knee replacement

論文目次

中文摘要 i
英文摘要 ii
誌謝 iii
目錄 iv
圖目錄： vii
表目錄： xii
一、緒論 1
1-1 研究背景與文獻回顧 1
1-1-1 膝關節解剖學與病理學介紹 1
1-1-2 膝關節步態與高度彎曲介紹 8
1-1-3 PS型人工膝關節與Post破壞形式 11
1-1-4 膝關節股骨髁抬昇位移(Lift-off)現象 14
1-1-5 人工膝關節之高度彎曲模擬分析文獻回顧 18
1-2 研究動機與目的 26
1-3 本文架構 27
二、材料與方法 28
2-1三維膝關節電腦模型的建立 28
2-1-1膝關節之醫學影像資料的蒐集 28
2-1-2二維膝關節影像的立體重建 31
2-2 膝關節步態、力學與材質資料的蒐集 35
2-2-1 膝關節之運動條件 35
2-2-2 膝關節組織的材料性質 44
2-3膝關節電腦動態分析模型的建立 47
2-3-1三維幾何模型的建立 47
2-3-2運動學參數的輸入 49
2-3-3材料性質的輸入 58
2-4膝關節電腦動態分析模型的驗證 59
2-4-1人工膝關節的植入 59
2-4-2人工膝關節元件間的接觸型式與磨耗形式 60
三、結果 61
3-1 Cam、Box、Post在不同角度下的接觸情形 61
3-2 F/E運動軸之變化情形 69
3-3 股骨內、外髁位移情形 70
四、討論 72
4-1 Cam、Box與Post接觸情形 72
4-2 F/E運動軸與內、外側股骨髁接觸位移情形 77
五、結論與未來展望 79
六、參考文獻 80

參考文獻

[1] John W. Hole, Jr., Karen A. Koos, Human Anatomy，胡銘一、孫穆乾、陳懿慧等譯，藝軒出版社，民81
[2] Martini, Bartholomew, Essentials of Anatomy & Physiology，林自勇、鄧志娟、陳瑩玲等譯，解剖生理學，全威圖書，民國九十二年
[3] Susan J. Hall, PH.D., Basic Biomechanics, New York, 2003
[4] James A. Rand, M.D., Total Knee Arthroplasty, New York, 1993
[5] P. Bowker, D. N. Condie, D. L. Bader, D. J. Pratt, W. A. Wallace, Biomechanical Basic of Orthotic Management, OXFORD, 1993
[6] Cynthia C. Norkin, Ed.D., P.T., Pamela K. Levangie, M.S., P.T., Joint Structure & Function, A Comprehensive Analysis Second Edition, Printed in the United States of American, 1992
[7] Susan J. Mulholland and Urs P. Wyss, “Activities of daily living in non-Western cultures: range of motion requirements for hip and knee joint implants” International Journal of Rehabilitation Research 24, 191-198, 2001.
[8] Massimo Mariconda, MD, Giovanni Lotti, MD, and Carlo Milano, MD, “ Fracture of posterior-stabilized tibial Insert in a genesis knee prosthesis” The Journal of Arthroplasty , Vol. 15 No. 4, 2000.
[9] P. Mestha, MBBS, DOrth, Y. Shenava, MS (Orth), DNB (Orth), FRCS,and John C. D’Arcy, FRCS, “Fracture of the polyethylene tibial post in posterior stabilized (Insall Burstein II) total knee arthroplasty” The Journal of Arthroplasty , Vol. 15 No. 6 2000
[10] David Hendel, MD, Avraham Garti, MD, and Moshe Weisbort, MD, “Fracture of the central polyethylene tibial spine in posterior stabilized total knee arthroplasty” The Journal of Arthroplasty Vol. 18 No. 5,2003
[11] Henry D. Clarke, MD, Kevin R. Math, MD, and Giles R. Scuderi, MD, “Polyethylene post failure in posterior stabilized total knee arthroplasty” The Journal of Arthroplasty Vol. 19 No. 5, 2004
[12] Yen-Shuo Chiu, MD, Wei-Ming Chen, MD, Ching-Kuei Huang, MD,Chao-Ching Chiang, MD, and Tain-Hsiung Chen, MD, “Fracture of the polyethylene tibial post in a NexGen posterior-stabilized knee prosthesis” The Journal of Arthroplasty Vol. 19 No. 8, 2004
[13] Kenneth C. Sands, MD; Joseph W. Silver, MD, “Fracture of the polyethylene tibial post in a posterior stabilized PFC total knee arthroplasty”, Orthopedics, Oct Volume 28, Number 10, 2005.
[14] Mohamed Samir Hefzy, Brian P. Kelly, T. Derek V. Cooke, “Kinematics of the knee joint in deep flexion: a radiographic assessment”, Medical Engineering & Physics , 20 , pp302–307, 1998.
[15] D. A. Dennis, R. D. Komistek, S. A. Walker, E. J. Cheal, J. B. Stiehl, “Femoral condylar lift-off in vivo in total knee arthroplasty”, J Bone Joint Surg;83-B:33-9, [Br] 2001
[16] John N. Insall, MD; Giles R. Scuderi, MD; Richard D. Komistek, PhD; Kevin Math, MD; Douglas A. Dennis, MD; and Dylan T. Anderson, BS, “Correlation between condylar lift-off and femoral component alignment” , Clinical Orthopaedics and Related Research , Number 403, pp. 143–152, 2002
[17] Takeo Nagura, Chris O. Dyrby, Eugene J. Alexander, Thomas P. Andriacchi “Mechanical loads at the knee joint during deep flexion” Journal of Orthopaedic , Research 20 (2002) 881–886
[18] Guoan Li Shay Zayontz, Louis E. DeFrate, Ephrat Most, Jeremy F. Suggs Harry E. Rubash,“Kinematics of the knee at high flexion angles: an in vitro investigation”, Journal of Orthopaedic Research 22 (2004) 90-95
[19] A. Hemmerich, H. Brown, S. Smith, S.S.K. Marthandam, U.P. Wyss, “Hip, knee, and ankle kinematics of high range of motion activities of daily living”, Journal of Orthopaedic, Res 24:770–781, 2006
[20] Jean-Noel A. Argenson,, Giles R. Scuderi, Richard D. Komistek, W. Norman Scott, Michael A. Kelly, Jean-Manuel Aubaniac, “In vivo kinematic evaluation and design considerations related to high flexion in total knee arthroplasty”, Journal of Biomechanics 38 (2005) 277–284
[21] Young-Hoo Kim, Keun-Soo Sohn and Jun-Shik Kim, “Range of motion of standard and high-flexion posterior stabilized total knee prostheses. A prospective, randomized study”, J Bone Joint Surg Am. , 2005; vol:87, 1470-1475.
[22] Taiyo Asano, MD; Masao Akagi, MD; Kenji Tanaka, MD; Jiro Tamura, MD; and Takashi Nakamura, MD, “In vivo three-dimensional knee kinematics using a biplanar image-matching technique” Clinical Orthopaedics and Related, Number 388, pp. 157–166, 2001.
[23] Richard D. Komistek, PhD, Douglas A. Dennis, MD, and Mohamed Mahfouz, PhD, “In Vivo Fluoroscopic Analysis of the Normal Human Knee” Clinical Orthopaedics and Related , Number 410, pp. 69–81, 2003.
[24] Louis E. DeFrate, Ramprasad Papannagari, Thomas J. Gill, Jeremy M. Moses, Neil P. Pathare and Guoan Li, “The 6 degrees of freedom kinematics of the knee after anterior cruciate ligament deficiency: An in vivo imaging analysis”, The American Journal of Sports Medicine, Vol. 34, No. 8, 2006.
[25] Ingrid Sudhoff, Ste´phane Van Driessche, Se´bastien Laporte , J.A. de Guise , Wafa Skalli, “Comparing three attachment systems used to determine knee kinematics during gait”, Gait & Posture 25 (2007) 533–543
[26] Tad W. Wilson,* MD, Michael P. Zafuta, MD, and Mark Zobitz, MS, “A biomechanical analysis of matched bone-patellar tendon-bone and double-looped semitendinosus and gracilis tendon grafts”, The American Journal of Sports Medicine, Vol. 27, No. 2, 1999
[27] Hans-Ulrich Staeubli, Christof Bollmann, Rolf Kreutz, Wolfgang Bexker, Wolfgang Rauschning, “Quantification of intact quadriceps tendon, quadriceps tendon insertion, and supratellar fat pad: MR arthrography, anatomy, and cryosections in the sagittal plane”, American Roentgen Ray Society, 1999;173;691-698
[28] John J. Elias and Andrew J. Cosgarea, “Technical errors during medial patellofemoral ligament reconstruction could overload medial patellofemoral cartilage: A computational analysis” American Journal of Sports Medicine , 2006; 34; 1478

指導教授

林上智(Shang-Chih Lin)

審核日期

2007-7-19

推文