表面置換型人工臏股骨關節的設計與分析

以作者查詢圖書館館藏

、以作者查詢臺灣博碩士

、以作者查詢全國書目

、勘誤回報

、線上人數：34

、訪客IP：3.16.51.237

姓名

吳昇財(Sheng-Tsai Wu) 查詢紙本館藏

畢業系所

機械工程學系

論文名稱

表面置換型人工臏股骨關節的設計與分析
(Design and Analysis of Surface Replacement Prosthesis for Patellofemoral Joint)

相關論文

★ 高彎曲度之人工膝關節多軸向動態磨耗試驗機開發	★ 人工髖關節雙軸向動態磨耗試驗平台開發
★ 大型犬人工髖關節之應力分析	★ 人體膝關節之高度彎曲電腦動態實體模型的建立
★ 足型與足壓電腦輔助分析系統開發	★ 超低溫液態氮生物試片儲存槽的研發
★ 腰椎人工椎間盤之運動軌跡分析	★ 二維及三維足型的應用與高跟鞋足壓的量測分析
★ 心血管支架塑性成形的有限元素分析	★ 靜態穿椎弓足內固定器之剛性對腰椎受力之影響
★ 腰椎內固定器之動態型式的生物力學評估	★ 超低溫高安全性生物試片儲存槽與即時監管理系統之開發
★ 超低溫液態氮生物試片儲存系統的硬體研發	★ 拇趾外翻足的鞋內矯正器之設計與評估
★ 表面置換型單髁人工膝關節的設計與分析	★ 髕股骨人工關節之動靜態分析與測試

檔案

[Endnote RIS 格式]

[Bibtex 格式]

[相關文章]

[文章引用]

[完整記錄]

[館藏目錄]

至系統瀏覽論文 ( 永不開放)

摘要(中)

近年來隨著生活型態的改變及醫學的進步，人類平均壽命逐年延長，老年病患也隨之逐年增加，其中以退化性關節炎就是明顯的例子；目前單一退化性臏股骨關節炎，臨床治療方式有：(1)全人工膝關節置換；(2)表面置換型人工臏股骨關節。其可以改善病患因為關節發炎而造成膝關節活動的不方便與臏骨周圍軟組織的不平衡等，進而增進臏骨與股骨之間的相互滑動正常。表面置換型人工臏股骨關節好處是微小骨切除量，且未來可在關節炎較為嚴重時再次進行全關節置換手術。
人工臏股骨關節目前最大的問題是在於植入物植入後不穩定，容易發生沈陷現象，而且植入物尺寸是定製化，人工關節之曲面與病患關節曲面無法完全配合。本研究針對現今臨床上臏股骨關節設計的缺點，考慮臏股骨關節退化部位的曲面差異，結合醫學影像重建的技術，依據不同病患，建構客製化關節的曲面設計與相對應之手術器械，實際模擬測試評估其整體可行性，並建構動態運動模擬真實之膝關節股骨與脛骨運動及受力之間的分析平台，藉以改進人工臏股骨關節之設計。

摘要(英)

In recent years, because the improvement of lifestyle and medical science has increased human age and the elder patient has increased every year too. The most obvious example is the osteoarthritis. Now the way of cure for isolated patellofemoral osteoarthritis has total knee replacement and surface replacement prosthesis for patellofemoral joint. It can improve inconvenient action of knee and unbalance of soft tissue nearby patella by osteoarthritis and then procure the normal slide of patella and femur. The advantage of surface replacement prosthesis for patellofemoral joint is not as much bone removed. Furthermore, it will perform the total knee replacement if the osteoarthritis becomes serious in future.
The most serious problem in the prosthesis for patellofemoral joint has consisted in the implant unstable and cave after the PFA surgery. Because the size of implant is ready made, the curved surface of implant can’’t complete match with the joint of an affected part. This research has aimed at the defect of nowadays design in clinical. Think of the difference between curved surface of implant and patellofemoral joint have combined with the reconstructing technology of medical image. We has construct the custom-made implant of patellofemoral joint and its surgical instruments and to estimate the feasibility by imitate the actual operation. In order to improve the design of the prosthesis for patellofemoral joint, we also has reconstruct the analytic simulation for kinematic of the knee.

關鍵字(中)

★ 人工臏股骨關節
★ 客製化
★ 動態分析

關鍵字(英)

★ kinematic analysis
★ patellofemoral joint

論文目次

目錄
摘要 i
ABSTRACT ii
誌謝 iii
目錄 iv
圖目錄 vii
表目錄 xiv
一、緒論 1
1-1 研究動機與目的 1
1-2 研究背景與文獻回顧 2
1-2-1 膝關節解剖學與生物力學介紹 2
1-2-2 膝關節病理學介紹 8
1-2-3 膝關節正常步態與高度彎曲運動介紹 12
1-2-4 人工臏股骨關節介紹 17
1-2-5 膝關節之高度彎曲模擬分析 21
1-3 本文架構 26
二、材料與方法 27
2-1 三維膝關節電腦模型的建立 27
2-1-1 醫學影像資料之蒐集 27
2-1-2 膝關節模型之立體重建 29
2-2 臏股骨植入物設計與打樣 33
2-2-1 植入物與手術器械之設計 33
2-2-2 植入物與手術器械打樣（prototype） 39
2-3 手術模擬實驗 44
2-3-1 手術器械銑料方式 44
2-3-2 遠端股骨模型製作 49
2-3-3 銑除手術模擬流程 54
2-4 銑削溫度熱效應實驗 54
2-4-1 實驗材料與設備 55
2-4-2 實驗方法與規劃 58
2-5 膝關節動態模擬分析 60
2-5-1 膝關節運動學參數資料 60
2-5-3 電腦動態分析模型的建立 67
三、結果 71
3-1 手術器械模擬實驗結果 71
3-2 銑削溫度熱效應實驗結果 73
3-3 膝關節動態模擬分析結果 76
四、討論 80
4-1 手術器械改良演進討論 80
4-1-1 第一代手術器械模擬結果討論 80
4-1-2 第二代定位塊之改良： 83
4-1-3 第三代定位塊改良 84
4-2 溫度實驗討論 85
4-3 動態模擬分析結果討論 88
五、結論與未來展望 94
參考文獻 96

參考文獻

參考文獻
[1]John W. Hole, Jr., Karen A. Koos., Human Anatomy，胡明一、孫穆乾、陳懿慧等譯，藝軒圖書，民國八十四年。
[2]Martini, Bartholomew, Essentials of Anatomy & Physiology，林自勇、鄧志娟、陳瑩玲等譯，解剖生理學，全威圖書，民國九十二年。
[3]呂厚山，人工關節外科學，科學出版社，北京，1998。
[4]Jess H. Lonner., “Patellofemoral Arthroplasty：Current Concepts” The University of Pennsylvania Orthopaedic Journal, Vol.15, pp. 1-5, 2002.
[5]John B. Meding, Jennifer T. Wing, E. Michael Keating, and Merrill A. Ritter,. “Total Knee Arthroplasty for Isolated Patellofemoral Arthritis in Younger Patients” CLINICAL ORTHOPAEDICS AND RELATED RESEARCH, Vol.464, pp. 78-82, 2007.
[6]Jess H. Lonner., “Patellofemoral Arthroplasty: Pros, Cons, and Design Considerations” Clinical Orthopaedics and Related, Vol.428, pp. 158-165, 2004.
[7]Andrew A. Amis., Wongwit Senavongse., Peter Darcy., “Biomechanics of Patellofemoral Joint Prostheses”, Clinical Orthopaedics and Related, Vol.436, pp. 20-29, 2005.
[8]B. Tauro, C. E. Ackroyd, J. H. Newman, and N. A. Shah., “The Lubinus patellofemoral arthroplasty：A FIVE-TO TEN-YEAR PROSPECTIVE STUDY” Journal of Bone and Joint Surgery-British, Vol.83-B, pp. 696-701, 2001.
[9]C. E. Ackroyd, J. H. Newman, R. Evans, J. D. J. Eldridge, and C. C. Joslin., “The Avon patellofemoral arthroplasty: FIVE-YEAR SURVIVORSHIP AND FUNCTIONAL RESULTS” Journal of Bone and Joint Surgery-British, Vol.89-B, pp. 310-315, 2007.
[10]Takeo Nagura, Chris O. Dyrby, Eugene J. Alexander and Thomas P. Andriacchi., “Mechanical loads at the knee joint during deep flexion” Journal of Orthopaedic Research, Vol. 20, pp. 881–886, 2002.
[11]Guoan Li Shay Zayontz, Louis E. DeFrate, Ephrat Most, Jeremy F. Suggs Harry and E. Rubash., “Kinematics of the knee at high flexion angles: an in vitro investigation” Journal of Orthopaedic Research, Vol. 22, pp. 90-95, 2004.
[12]A. Hemmerich, H. Brown, S. Smith, S.S.K. Marthandam and U.P. Wyss., “Hip, knee, and ankle kinematics of high range of motion activities of daily living” Journal of Orthopaedic Research, Vol. 24, pp. 770–781, 2006.
[13]Taiyo Asano, Masao Akagi, Kenji Tanaka, Jiro Tamura and Takashi Nakamura., “In vivo three-dimensional knee kinematics using a biplanar image-matching technique” Clinical Orthopaedics and Related, Number 388, pp. 157–166, 2001.
[14]Richard D. Komistek, Douglas A. Dennis and Mohamed Mahfouz., “In Vivo Fluoroscopic Analysis of the Normal Human Knee” Clinical Orthopaedics and Related, Number 410, pp. 69–81, 2003.
[15]Louis E. DeFrate, Ramprasad Papannagari, Thomas J. Gill, Jeremy M. Moses, Neil P. Pathare and Guoan Li, “The 6 degrees of freedom kinematics of the knee after anterior cruciate ligament deficiency: An in vivo imaging analysis”, The American Journal of Sports Medicine, Vol. 34, No. 8, 2006.
[16]Ingrid Sudhoff, Ste´phane Van Driessche, Se´bastien Laporte , J.A. de Guise and Wafa Skalli., “Comparing three attachment systems used to determine knee kinematics during gait”, Gait & Posture, Vol. 25, pp. 533–543, 2007.
[17]Guoan Li, Ephrat Most, Peter G. Sultan, Shay Zayontz, Sang Eun Park and E. Rubash,. “Knee Kinematics with a High-Flexion Posterior Stabilized Total Knee Prosthesis An in Vitro Robotic Experimental Investigation”, Journal of Bone and Joint Surgery, Vol. 86-a, No. 8, pp. 1721-1729, 2004.
[18]T.J.A. Momersteeg, L. Blankevoort, R.Huisles, J. G. M. Kooloos, J. M. G. Kauer and J. C. M. Hendrils,. “The Effect of Variable Relative Insertion Orientation of Human Knee Bone-Ligament-Bone Complexes on the Tensile Stiffness”, Journal of Biomechanics, Vol. 28, pp. 745-752, 1995.
[19]Nagura T, Matsumoto H, Kiriyama Y, Chaudhari A, Andriacchi TP., “Tibiofemoral Joint Contact Force in Deep Knee Flexion and Its Consideration in Knee Osteoarthritis and Joint Replacement”, Journal of applied biomechanics, Vol. 22, pp. 305-313, 2006.
[20]AR Eriksson, T Albrektsson., “Temperature threshold levels for heat-induced bone tissue injury: a vital-microscopic study in the rabbit”, Journal of Prosthetic Dentistry, Vol. 50, pp. 101-107, 1983.
[21]Y Reingewirtz, S Szmukler-Moncler, B Senger., “Influence of different parameters on bone heating and drilling time in implantology”, Clinical Oral Implants Research, Vol. 8, pp. 189-197, 1997.
[22]AR Eriksson, T Albrektsson, BÖR Albrektsson - Acta Orthopaedica., “Heat caused by drilling cortical bone: Temperature measured in vivo in patients and animals”, Vol. 55, pp. 629-631, 1984.
[23]Andy Williams, Martin Loganb., “Understanding Tibio-Femoral Motion”, The Knee, Vol. 11, pp. 81-88, 2004.
[24]Thomas P. Andriacchi, Chris O. Dyrby and Todd S. Johnson., “The Use of Functional Analysis in Evaluating Knee Kinematics”, Clinical Orthopaedics and Related Research, Number 410, pp. 44-53, 2003.
[25]王裕民，「人體膝關節之高度彎曲電腦動態實體模型的建立」，中央大學，碩士論文，2007。
[26]許能昌，「高彎曲度之人工膝關節多軸向動態磨耗試驗機開發」，中央大學，碩士論文，2007。
[27]Revolution Health Group LLC. http://www.revolutionhealth.com
[28]愛鄰復健科診所，http://www.rehcare.com.tw
[29]Avon Patellofemoral Arthroplasty. http://www.stryker.com

指導教授

林上智(Shang-Chih Lin)

審核日期

2008-7-22

推文