| 摘要(英) |
Cardiovascular diseases have been the primary threats of human health and life all the time, the traditional treatments of cardiovascular diseases are medicinal treatment and operation. But the traditional operation is full of high risk and hard to operate. Moreover, it also takes lots of money. Therefore, a new medical technology - Coronary Stent, is developing and paid more and more attention by people. It’s a new treatment with advantages such as low invasion, light wound, high safety, and reduces the possible complications of main organs.
In this research, we build the stent models - MAC Stent, Maneo Stent, Palmaz Stent, which construct three kinds of different high complicated curved surfaces by SolidWorks, and execute finite element analysis. We analyze the stress distribution of blood vessel and stent got through contraction and dilation, to understand the influence on the wall of blood vessel when stent planted into blood vessel and brace the wall. In addition, set different materials including 316L stainless steel, Ti-6Al-4V and N-Ti alloy for each model, and probe into the stress value and distribution of these models. |
| 參考文獻 |
[1] C Dumoulin ,B Cochelin., Mechanical behaviour modelling of balloon-expandable stents. Journal of Biomechanics, 2000, 33: 1461-1470.
[2] Ferdinando Auricchio, M. D. Loreto, E. Sacco., Finite-element analysis of a stenotic artery revascularization through a stent insertion .JournalComputer Methods in Biomechanics and Biomedical Engineering, 2000, 00: 1-15.
[3] Francesco Migliavacca, Lorenza Petrini, Maurizio Colombo., Mechanical behavior of coronary stents investigated through the finite element method . Journal of Biomechanics, 2002, 35: 803-811.
[4] S.N.David Chua, B.J. Macdonald, M.S.J Hashmi. Finite-element simulation of slotted tube (stent) with the presence of plague and artery by balloon expansion . Materials Processing Technology, 2004, 155-156: 1772-1779.
[5] S.N.David Chua, B.J. Macdonald, M.S.J. Hashmi., Effects of varying slotted tube (stent) geometry on Its expansion behaviour using finite element method . Journal of Materials Processing Technology, 2004, 155-156: 1764-1771.
[6] Lorenza Petrini, Francesco Migliavacca, Ferdinando,Auricchio et al., Numerical investigation of the intravascular coronary stent flexibility . Journal of Biomechanics 2004,37,495-501.
[7] Cheng-Ti Zhou, He-Yan Dong., Stability and dynamic deforming process for structure of coronary artery stents . Current Applied Physics, 2005, 5: 458-462.
[8] Franesco Migliavacca, Lorenza Petrini, Valeria Montanari, et al. , A Predictive Study of the Mechanical Behaviour of Coronary Stents by Computer Modeling [J]. Medical Engineering & Physics, 2005, 27: 13-18.
[9] W. Walke, Z. Paszenda, J. Filipiak., Experimental Andnumerical Biomechanical Analysis of Vascular Stent . Journal of Materials Processing Technology, 2005, 164-165: 1263-1268.
[10] C. Lally, F. Dolan , P. J. Prendergast., Cardiovascular Stent Design and Vessel Stresses:A Finite Element Analysis . Journal of Biomechanics, 2005, 38: 1574-1581.
[11] 王躍軒,黃玉平,郭愛民,冠脈支架擴張過程數值模擬方法研究,航天科技集團公司一院十八所研發中心,用戶年會論文,2006
[12] 蔡豐銘,形狀記憶合金之有限元素分析,國立雲林科技大學,碩士論文,2002
[13] 魏妙俶,血管支架之有限元素分析與設計,國立成功大學,碩士文,2005
[14] 戴文鏗,血管支架塑性成形分析,國立中山大學,碩士論文,2004
[15] 陳奕安,血管支架設計與分析之研究,國立中山大學,碩士論文,2004 |
[Endnote RIS 格式]
[相關文章]
[文章引用]
[完整記錄]
[館藏目錄]
至系統瀏覽論文 ( 永不開放)
plurk
funp
live
udn
HD
myshare
netvibes
friend
youpush
delicious
baidu
Google bookmarks
del.icio.us
hemidemi
facebook
twitter
google
reddit