摘要(英) |
PCB (printed circuit board) is an integrated industry of optics, electricity,chemistry, machinery, and management. In year 2007, the total industry revenuealready reached 44.2 billion USD. The wet processes for plating of PCB
industry use large amount of metal salts. Therefore, their waste liquids usually contain high valuable metals, such as copper, lead, nickel, gold and palladium.In 2006, the reported amount of waste with heavy metals in Taiwan PCB
industry was around 322,907 ton. If these wastes are not well treated, their impact to environment and ecologic system will be serious and also will costenterprises and society more.
This thesis takes a PCB plant in northern Taiwan as an example to discuss theefficiency and operating cost, for recovering gold from waste liquid usingelectrolysis and ion exchange. This study shows the following results:
1. The efficiency of ion exchange is better than that of
electrolysis in gold recycle.
2. The efficiency of combination of ion resins is better
than that of the combination of ion resin and
electrolysis in gold recycle. This finding is different
from literatures. Therefore, it is suggested that the
recycling facility should be optimized to reduce the
loss of gold.
3. It was found that gold recycling efficiency was 96%.
Resin of ion resin for a PCB plant located in northern
Taiwan reached the capacity limit in the third day of
test. If the resin is not replaced, then breakthrough
will occur. Therefore, this study suggests the PCB
plants using ion resin for gold recycling must
understand the breakthrough point for flow and time
to avoid loss of gold.
4. The analysis indicates that semi-finished product is of
the highest percentage of the gold input. An efficient
recycling system is needed to properly deal with the
subsequent waste problem and avoid resource waste and
environmental pollution.
Key words : printed circuit board, gold, ion exchange,
electrolysis, recycling efficiency. |
參考文獻 |
﹝1﹞ Metal Handbook 9th Edn,〝American Society for
Metal〞, MetalPark,Ohio,Vol.5,1982
﹝2﹞ Mallory, G.O. and Hajdu, J.B.,〝 Electroless
Plating : Fundamentals and Applications〞, AESF,
Orlando, Florida, Chap.1, USA,1990.
﹝3﹞ Thompson, H.S. “On the Absorbent Power of Soils.”,
J.Royal Agr. Soc.,11, 68, 1850.
﹝4﹞ Gans, R., Jahrb. Preuss. Geol. Landesanstalt
(Berlin), 26, 179, 1905.
﹝5﹞ Weber, W.J.Jr.,Physiconchemical Processes for Water
Quality Control,Wiley-Interscience,New York,1972.
﹝6﹞ Calmon, C.,〝Trace Heavy Metal Removal by Ion
Exchange〞, in Traces of Heavy Metals in Water
Removal Processes and Monitoring, Ed.Sabadell,
J.E.,US EPA-902/9-74-001,1974.
﹝7﹞ Helms, R.F.,〝Evaluation of Ion Exchange for
Demineralization of Wastewater〞, Master's
Thesis,University of Colorado, Boulder,Co,1973.
﹝8﹞ Benefield, L. D., Judkins.J.F., and Weand, B.L.,
Process Chemistry for Water and Wastewater
Treatment , Prentice Hall(1982).
﹝9﹞ Monk, P., Fundamentals of Electroanalytical
Chemistry , John Wiley& Sons, New York, 2001.
﹝10﹞Boyanov, B. S., Donaldson, J.D. and Grimes, S.M,
〝Removal of Copper and Cadmium from
Hydrometallurgical Leach Solution by Fluidised Bed
Electrolysis〞, Journal of Chemical Technology and
Biotechnology, 41,317-328, 1988.
﹝11﹞Alasheh, S. and Duvnjak.Z, 〝Sorption of Cadmium and
Other Heavy Metals by Pine Bark〞, Journal of
Hazardous Materials, 56, 35-51,1997.
﹝12﹞Mandich, N. V., Li, C. C. and Selman, J.R., 〝
Practical and Theoretical Aspect of Regeneration of
Chromic-Acid Plating Solution via Electrolytic
Purification (Porous Pot Method) 〞, Plating and
Surface Finishing, 84, 82-90, 1997.
﹝13﹞Zhestkova, T. P., A. A. Pikaev, A. K. Pikaev, D. K.
Kim, Y. Kim, and B.Han, 〝Lead Removal from Aqueous-
Solutions by Electron-Beam Treatment in the Presence
of a Scavenger of OH Radicals〞, High Energy
Chemistry, 31, 222-225, 1997.
﹝14﹞Maeda, B.T.,Woodworth , R.E and Aitchison, K.,
〝Treating Waste Generated by Copper Electroplating
Tools〞, Micro, September, 39 ,1999.
﹝15﹞行政院國家永續發展全球資訊網:第一章永續發展推動趨勢
與現況,2008 年6 月1 日,取自
http://ww2.epa.gov.tw/nsdn。
﹝16﹞洪玠育,「金、鈀貴金屬回收再利用」,綠基會通訊,
2006 年7 月。
﹝17﹞中金再線:世界黃金協會2007 年報告評述,2008 年1 月5
日,取自http://www5.cnfol.com/big5/www.cnfol.com/。
﹝18﹞KITCO:近10 年國際金價走勢圖。2008 年4 月5 日,取自
http://www.kitco.com/。
﹝19﹞歐美加電子材料股份有限公司:電鍍文獻-鍍金,2008 年1
月5 日,取自http://omega-hc.com/plating/plating.htm.。
﹝20﹞光洋應用材料科技股份有限公司,「北區金鹽市調」,2007
年。
﹝21﹞財團法人台灣綠色生產力基金會, 國內印刷電路板製造業
主要廢棄物再利用供需鏈最適化輔導與推廣報告,財團法人
台灣綠色生產力基金會, 民國96 年11 月。
﹝22﹞經濟部工業局,印刷電路板製造業廢棄物資源化案例彙編,
經濟部工業局,民國85 年。
﹝23﹞林定皓,印刷電路板簡介(入門篇),初版,台灣電路板協
會,桃園市,民國94 年。
﹝24﹞李文瑞、陳秋宏,「產業群聚與競爭優勢─我國印刷電路板
產業發展與競爭力之分析」,經濟情勢暨評論,第3 卷第4
期,P209-229,民國87 年2 月。
﹝25﹞王文裕、鄭智和,印刷電路板資源化應用技術手冊,台灣綠
色生產力基金會,民國91 年12 月。
﹝26﹞柯明志,「成熟產業環境之競爭策略研究 - 我國印刷電路板
產業為例」,國立台灣大學,碩士論文,民國93 年。
﹝27﹞林素琴,「2008 年PCB 產業發展大趨勢」,工研院IEK 化材
組,民國97 年3 月。
﹝28﹞台灣電路板協會,電路板製造業分佈圖,民國97 年1 月。
台灣電路板協會,印刷電路板概論(養成篇),初版,台灣電
路板協會,民國94 年2 月。
﹝29﹞台灣電路板協會,電路板溼製程全書,初版,台灣電路板協
會,民國94 年10 月。
﹝30﹞楊聰仁,「無電鍍鎳研究與應用現況」,工業材料,第106
期,118~124頁,84 年4 月。
﹝31﹞楊聰仁,「無電鍍鎳技術與應用」,化工,第40 卷,第6
期,18-27頁,1993。
﹝32﹞楊聰仁:材料基礎實驗(一)電鍍鎳與無電鍍鎳實驗。2008 年
2 月20日,取自
http://www.mse.fcu.edu.tw/download/basic_experiment/
B/B-02.doc。
﹝33﹞莊萬發,無電解鍍金-化學鍍金技術,復漢出版社,民國85
年。
﹝34﹞翁文爐,「含貴金屬廢液資源化技術探討」,資源化產業資
訊,第11期,93 年3 月。
﹝35﹞鄭智和,「廢印刷電路板及邊料資源化技術」,環保產業雙
月刊,第16 期,91 年12 月,取自
http://www.environet.org.tw/publication/
monthly16_m3.htm
﹝36﹞鄭智和,「廢印刷電路板之處理技術介紹」,電路板會刊,
第14 期,64~69 頁,90 年12 月。
﹝37﹞曾迪華,工業污染防治技術手冊之十-工業廢水離子交換處
理,經濟部工業局,財團法人中國技術服務社工業污染防治
技術服務團,民國76 年。
﹝38﹞三菱化學株式會社,DIAION 離子交換樹脂&合成吸附劑技術
手冊Ι,Japan, 2001。
﹝39﹞大矢晴彥監修、賴耿陽譯著,純水‧超純水製造法:製程技術
與應用系統,臺南市,復漢出版社,民國75 年 。
﹝40﹞楊岳軍,「離子交換樹脂在重金屬廢水處理之應用」,重金
屬廢水處理技術研討會,工研院化工所,民國78 年。
﹝41﹞張晉,水處理工程與設計(下),鼎茂圖書出版有限公司,民
國88 年11 月。
﹝42﹞李孫榮、張錦松、張錦輝、陳健民、曾如娟共譯,環工單元
操作,高立圖書有限公司,台北,民國85 年。
﹝43﹞田福助,電化學-理論與應用,高立圖書有限公司,台北,
民國82年。
﹝44﹞田福助,電化學基本原理與應用,五洲出版社,台北巿,民
國93 年4 月。 |