利用GIS進行廣域山區順向坡至逆向坡
之判別與潛勢評估–以北橫地區為例

以作者查詢圖書館館藏

、以作者查詢臺灣博碩士

、以作者查詢全國書目

、勘誤回報

、線上人數：59

、訪客IP：3.139.108.99

姓名

周賢德(Hyrum Chou) 查詢紙本館藏

畢業系所

應用地質研究所

論文名稱

利用GIS進行廣域山區順向坡至逆向坡之判別與潛勢評估–以北橫地區為例
(Identification and Potential Evaluation of Cataclinal and Anaclinal Slopes over a Large Area Using GIS – Northern Cross-island Road for Example )

相關論文

★ 沉箱式碼頭受震引致土壤液化之數值模擬	★ 落石運動之模型試驗研究
★ FLAC程式應用於土壤邊坡穩定分析	★ 水平互層地盤之承載行為研究及承載力之預估
★ 北橫公路復興至巴陵段岩石單壓強度之初步預估模式	★ 車籠埔斷層北段之地下構造研究
★ 以岩體分類探討非構造性控制破壞之岩坡最陡安全開挖坡度	★ 異向性軟岩邊坡地下水滲流對孔隙水壓分佈影響之探討
★ 軟弱沉積岩層滲透異向性之探討	★ 臺地邊緣復發式邊坡滑動之水文地質因素探討-以湖口臺地南緣地滑地為例
★ 大型岩崩之潛勢與災害影響範圍之研究	★ 節理岩體滲透係數之先天異向性與應力引致異向性
★ 比較集集地震引致紅菜坪地滑及九份二山地滑特性之研究	★ 斷層擴展褶皺之斷層破裂距離與斷層滑移量比值(P/S)力學特性之研究
★ 土石流潛勢溪流特性分類	★ 孔隙水壓模式對紅菜坪地滑區穩定性之影響

檔案

[Endnote RIS 格式]

[Bibtex 格式]

[相關文章]

[文章引用]

[完整記錄]

[館藏目錄]

[檢視]

[下載]

本電子論文使用權限為同意立即開放。
已達開放權限電子全文僅授權使用者為學術研究之目的，進行個人非營利性質之檢索、閱讀、列印。
請遵守中華民國著作權法之相關規定，切勿任意重製、散佈、改作、轉貼、播送，以免觸法。

摘要(中)

由於台灣地狹人稠，山坡地的開發勢必無法避免，而西部走廊山區位於褶皺地區，所以順、逆向坡之分佈極廣，潛在地質災害之發生機率亦很高。因此不論是一般相鄰山坡地建築開發或是公共建設的拓展，面臨選址或是選線的初步設計規劃階段，對於順、逆向坡確切位置的掌握實為一重要的課題。本論文主旨在於利用 GIS 建立一個廣域地區順向坡至逆向坡之評估架構。
本研究主要探討兩種單組弱面控制之山崩形式，一為順向坡平面滑動、一為逆向坡傾倒破壞。採用岩石力學中等角立體投影圖的概念，進行地表坡向、坡度與地層傾向、傾角的比對運算，分別給予其不同形式的山崩潛感指標。利用趨勢面多項式回歸分析法來內差估計研究區域地層層面的位態走勢，再利用數值地形模型DTM進行坡度坡向運算，最後使用GIS電腦軟體進行初步自動順、逆向坡測繪工作。首先針對一個含有對稱連續地形及平滑變化弱面之虛擬簡化案例，本架構方法產生了十分合理之順、逆向坡評估圖幅。
本論文實際研究場址為台灣北部橫貫公路復興至巴稜路段。經由蒐集已發表的地質圖、航空照片、數值地形、物性影像等。進行室內資料處理，主要工作包括航空照片立體對人工判釋順向坡、地層位態多項式趨勢面分析、接著由程式根據差異角度自動萃取順向坡。接著進行現地查核，與程式自動萃取所得之順向坡範圍相互比較，進行野外查證以確定順、逆向坡位置及其範圍。最後依照現地查核地層位態角度比對結果，提出本研究區域單組弱面控制邊坡破壞指標分佈圖，進行成果輸出。成果比較顯示，在復興路段對於大規模順、逆向坡判斷良好，但在榮華大壩過後地層變化極大的區域，其準確度不佳，此為多項式迴歸產生極大殘差值所致。故在最後使用另一種迴歸方法『Kriging』與原方法作一比較。另外在研究範圍區域限制方面，亦縮小了研究區域的複雜性另行比較。相較於傳統人工野外踏勘的曠日廢時、以及航照判釋因人而異的不確定性。本論文建立了一套完整自動化順、逆向坡測繪模式，整合 GIS / GPS / RS 等地理資訊系統進行初步自動順、逆向坡的測繪工作，結合單組弱面控制的順、逆向坡的潛感指標給予其不同權重，以提供未來廣域山坡地開發選址、交通工程線型先期規劃的重要輔助工具。

摘要(英)

Because of huge population over a relatively-small plain area in Taiwan, the continuous reclamation of slope-lands is a general trend. The west-side corridor of Taiwan is located in a fairly-folded terrain of numerous bedding planes, in which cataclinal and anaclinal slopes are populated, both leading to geological hazards. Locating the probable cataclinal and anaclinal slopes is greatly valuable for siting such reclamation in the preliminary stage. However, a detailed site investigation and precise mechanical analysis is not affordable for performing this task over a large area. The objective of this thesis is to establish a preliminary framework of quantitatively rating cataclinal and anaclinal slopes over a wide region using the geographic information system (GIS) technique.
The preliminary rating system of cataclinal and anaclinal slopes in this thesis is based on the National water-soil preservation code and the kinematics analysis by comparing the attitude data of a surface slope and those of the closest outcropping bedding plane (as a only discontinuity), neglecting the contribution of others. And the adequacy of this system will be justified through the accumulative field observations and model test results. The attitude data of a surface slope were determined by GIS with input of DTM, while those of the bedding plane at any point were estimated by a polynomial interpolation method (up to an order of n) with input of real attitude measurements. A hypothesized case of one symmetrical continuous slope surface and smoothly-varied bedding planes was used to testify the above proposed framework, and it is found that the rating maps produced are very reasonable.
The target field site under investigation is the area between Fu-hsin and Ba-lin along the Northern Cross-Island Road. The grid size of DTM map used is 40m?40m. The attitude data of weak planes were collected through various sources, whose correctness were unknown; the total number of these data was much less than that of slope surfaces computed by the DTM map, and its spacial distribution was not uniform over the target area. By comparing the rating map produced with the limited number of field observations, it is found that good match appears in most sites of smoothly-changing bedding attitude, but large deviation occurs in the Zong-hwa damsite with considerable variation in bedding attitude. In the latter case, an additional effort was made in which the Kriging method was used to replace the polynomial interpolation method for estimating the bedding attitude. Subsequently, it is concluded that the proposed scheme is very useful for rating that the upper-left quarter of the study area, in which bedding attitude varies quite smoothly. In summary, the rating framework established in this thesis is a automatic, quick and objective tool for quantitatively locating cataclinal and anaclinal slopes with a sufficient number of reliable input data, and it will provide a sound reference of preliminary siting and planning in the slope-lands of Taiwan in the near future.

關鍵字(中)

★ DTM
★ 位態
★ GIS
★ 逆向坡
★ 順向坡
★ 北部橫貫公路

關鍵字(英)

★ anaclinal slope
★ cataclinal slope
★ GIS
★ attitude
★ Northern Cross-Island Road
★ DTM

論文目次

中文摘要
英文摘要
致謝
目錄
圖目錄
表目錄
第一章序論
1.1前言
1.2研究動機與目的
1.3文獻回顧
1.4研究方法及步驟
第二章地層位態與數值地形分析
2.1 地層位態與數值地形
2.2 地層位態多項式分析
2.2.1 多項式趨勢面分析流程
2.2.2 地層位態幾何轉換
2.2.3 地層位態趨勢面
2.3 數值地形定義
2.3.1 資料結構與格式
2.3.2 數值影像資料內容
2.3.3坡度與坡向分析
2.3.3.1 坡度分析
2.3.3.2 坡向分析
第三章順、逆向坡萃取方法
3.1 順、逆向坡定義
3.2 等角度立體投影訂定順、逆向坡規則
3.3 GIS軟體自動萃取順向坡
3.4簡化案例：人造地形與地層的測繪
第四章案例研究-北橫公路順、逆向坡萃取
4.1 研究區概述
4.1.1 地理位置
4.1.2 地質概述
4.2 地層位態分析
4.2.1 地層位態取得
4.2.2 地層位態趨勢面分析
4.3 地表坡型分析
4.4 順、逆向坡判別及破壞潛勢能指標計算
第五章判別結果與討論
5.1 順、逆向坡野外查核結果
5.1.1 霞雲-羅浮
5.1.2 義興電廠
5.1.3 榮華大壩
5.1.4 蘇樂-巴陵
5.1.5 Kriging與多項式分析結果比較
5.2 討論
5.2.1 地層位態趨勢面分析方法及精度問題
5.2.2 原始資料的抉擇-傾向傾角 vs. 三軸分量
第六章結論與建議
6.1 結論
6.2 建議
參考文獻
附錄A 桃園北橫區域層面位態分析示意圖
附錄B 北橫公路順、逆向坡野外查核圖版
附錄C 空間幾何運算流程原始檔
附錄D 人造地形與地層建構之原始檔

參考文獻

Bishop, A.W., 1955. The use of the slip circle in the stability analysis of slopes., Geotechnique, v.5, n.1, pp.7-17.
David, L.A., 1992, Using areal criteria to perform trend analysis, Geobyte, v.8, pp.54-57.
Davis, J.C., 1986, Statistics and data analysis in geology, 2nd, ed., John Wiley & Sons, Inc., N.Y., pp.293-339.
Davis, J.C., and Sampson, R.J., 1992, Trend-surface analysis:Early computer technique remain popular,useful., Geobyte, 7(4), pp.38-43.
Erdas Imagine Field Guides v8.5, 2001, ERDAS, Inc.
Erdas Imagine Tour Guides v8.5, 2001, ERDAS, Inc.
ESRI, 1990, Understanding GIS: The arcinfo method. Redland, California: ESRI, Inc.
ESRI, 1996, Using Arcview GIS. Redland, California: ESRI, Inc.
Gao, J. & Lo, C. P., 1991, GIS Modeling of Influence of Topography and Morphology on Landslide Occurrence in Nelson County, Virginia: GIS/LIS ’’91 Proceedings, v.1, pp.954-963.
Glenn, L.K., 1992, Pitfalls in computer contouring(PartⅠ), Geobyte, v.6, pp30-35.
Glenn, L.K., 1992, Pitfalls in computer contouring(PartⅡ), Geobyte, v.8, pp31-37.
Golden Software,1994, SURFER for windows USER’’S GUIDE, Inc.
Goodman, R.E., 1976, Methods of geological engineering in discontinuous rocks., West Publishing Co., St. Paul, MN., 472p.
Goodman, R.E., 1976,Principles of stereographic projection and joint surveys, in methods of geological engineering in discontinuous rocks., West, St. Paul, MN.
Goodman, R.E., 1989, Introduction to rock mechanics., John Wiley & Sons, Inc., N.Y., 478p.
Grant, F., 1957, A problem in the analysis of geophysical data., Geophysics, v.22, pp309-344.
Hoek, E. and Bray, J.W., 1977, Graphical presentation og geological data, in rock slope engineering, 2nd ed., Institute of mining and metallurgy, London.
Hohn, E. M., 1988, Geostatistics and Petroleum Geology, Van Nostrand, N.Y., pp.264.
Horst, F. and von Bandat, 1962, Aerogeology, Gulf publishing Com., 350p.
Jones, T.A., and Hamilton, D.E., and Johnson, C.R. 1986, Contouring geologic surfaces with the computer, Van Nostrand Reinhold Co, N.Y., 314p.
Krumbein, W.C., 1956, Regional and local components in facies maps., Bull. of AAPG, v.40, 2164-2194.
Krumbein, W.C., 1959, Trend surface analysis of contour-type maps with irregular control-point spacing, Jour. Geophysical Research, v.64, pp.823-834.
Phillips, F.C., 1972, The use of stereographic projection in structural geology, 3rd ed., Arnold, London.
Read, W.A. and Merriam, D.F., 1966, Trend surface analysis of stratigraphic thickness data from some namrain rocks east of Stirling, Scotland, Scott. Jour. of Geology., v.2, pp.96-100.
Richard, B. B., and Joseph, K.S., 1992, Computer processing of multiple 3-D fault blocks containing multiple surfaces, Geobyte, v.8, pp58-62.
Wentworth, C. M., Ellen, S. D. & Mark, R. K.1987, Improved Analysis of Regional Engineering Geology using Geograpic Information System (GIS), GIS’’87, Vol. 2, 636-649.
Whitten, E.H.T., 1959, Composition trends in a granite:Model variation and ghost stratigraphy in part of the Donegal granite,Eire., Jour. Geophysical Research, v.64, pp.835-849.
工研院能資所, 1985, 台灣省環境地質圖資料庫
中國石油股份有限公司, 1975, 雪山山脈地質圖.
中興工程顧問社, 1978, 榮華大壩及電廠工程定案研究報告.
王鑫, 1991, 地形學, 聯經出版事業公司.
李良輝, 1994, 遙測影像之幾何處理與數值地形模型之整合應用, 中正理工學院測繪工程學系, 272 頁.
林銘郎, 1995, 北橫公路榮華壩址附近邊坡穩定（Ｉ）研究, 行政院國家科學委員會專題研究計劃成果報告.
張原賓, 1999, 以趨勢面分析技術輔助大區域之順向坡測繪, 碩士論文, 國立中央大學應用地質研究所.
陳永寬,鄭祈全,賴晃宇, 1994, 數值地形模型應用於潛在崩塌地之預測, 第四屆ESRI & ERDAS User conference 論文集, pp.221-236.
游中榮, 1996, 應用地理資訊系統於北橫地區山崩潛感之研究, 碩士論文, 國立中央大學應用地質研究所.
劉進金, 1985, 地理資訊系統及其在區域邊坡穩定之應用實例, CIMME 民國七十四年年會宣讀之論文.
鍾振東, 1973, 臺灣之所謂古第三系—烏來統之層位問題, 地質, 第一卷, 第一期, pp.109-116.
簡李濱, 1992, 應用地理資訊系統建立坡地安定評估之計量方法, 國立中興大學土木工程研究所碩士論文, 118 頁.

指導教授

董家鈞、葛德治(J.J. Dong)

審核日期

2002-7-12

推文