![]() |
|
以作者查詢圖書館館藏 、以作者查詢臺灣博碩士 、以作者查詢全國書目 、勘誤回報 、線上人數:42 、訪客IP:3.15.34.122
姓名 李興傑(Sing-jie Lee) 查詢紙本館藏 畢業系所 化學學系 論文名稱 環烯烴高分子質子傳導膜之開發
(Cyclo-olefin copolymers (COC) containing pendant ion as proton exchange membrane (PEM))相關論文 檔案 [Endnote RIS 格式]
[Bibtex 格式]
[相關文章]
[文章引用]
[完整記錄]
[館藏目錄]
[檢視]
[下載]
- 本電子論文使用權限為同意立即開放。
- 已達開放權限電子全文僅授權使用者為學術研究之目的,進行個人非營利性質之檢索、閱讀、列印。
- 請遵守中華民國著作權法之相關規定,切勿任意重製、散佈、改作、轉貼、播送,以免觸法。
摘要(中) 本篇主要研究利用Diels-Alder之有機反應,引進具磺酸根類之官能基於環烯烴 (NB) 之單體上,目前已經成功的合成開發多種具磺酸根衍生物之環烯烴單體及可調控性質之環烯烴單體,並合成聚合所需之鎳金屬觸媒。利用鎳金屬觸媒催化或自由基進行環烯烴單體之聚合反應,進而構建具質子傳導特性與親疏水相 (兩相) 之共聚團鏈高分子 (PNB)。
亦可用釕金屬觸媒進行這類單體之開環歧化聚合反應 (ROMP) 得到新一類具磺酸根官能基環烯烴高分子 (PNBRu),且可利用此一類高分子 (PNBRu) 與無機交聯劑進行共聚交聯,或與具高支鏈結構 (hyper branch architecture) 雙馬來醯亞胺 (mBMI) 進行混摻共聚 (PNB-BMI),成功開發新一類型的質子傳導膜材料。
我們亦成功開發具雙鍵之環烯烴 (NB) 於 SPEEK高分子,並進行其交聯聚合以得新穎的可交聯之PNB-SPEEK,以改善目前SPEEK類膜材的高吸水澎潤性而無法於高溫下使用之缺點。
之後進行材料的鑑定及其電性、膜之吸水性、及膨潤度等之特性測量,然後經由這些初步的傳導膜之各項測試結果,我們將再進行多項高紛子製備的調控。期望此類聚合物於成膜後 (質子傳導膜;PEM) 可以適用於高溫甲醇直接進料之燃料電池 (DMFC),並期達到所需求的高質子導電度 (具良好的質子傳遞性) 及低甲醇滲透率。最後,我們將依其所得之結果來開發更新穎之環烯烴高分子的材料。摘要(英) Via the Diels-Alder reaction, a series of new sulfonated noborene based monomers will be developed. To polymerize these new monomers, the organic Ni catalyst will be synthesized and their polymerization behaviors will be examined. Then, the performances of the proton exchange membranes (PEM) derived from the above new sulfonated cyclo-olefin based polymers will be investigated. The copolymerization of these new monomers catalyzed by the Ni catalyst to produce the block copolymer will be explored. By employing the ring-open metathesis polymerization (ROMP) Ru catalyst, new type of sulfonated cyclo-olefin based polymers will be generated and the new membranes properties will be evaluated. To increase the mechanical strength and to decrease the swelling of fuel cell membranes, cross-linking of these new polymers by radical polymerization procedure will be tested. The polymerization conditions, such the polymerization temperature, monomers uptake ratio, polymerization solvent, will be explored to derive the relationship of the condition modification vs. the corresponding membranes’ performance.Hopefully, with the introduction of the new type of sulfnated cyclo-olefin (norborene) polymer, a new type of proton exchange membranes with higher proton conductivity, lower methanol cross-over, lower water swelling, and higher thermal and chemical stability than the common used Nafion (produced by Dupont) will be developed to satisfy the desired specifications for direct methanol fuel cells (DMFC). 關鍵字(中) ★ 甲醇直接進料燃料電池
★ 甲醇滲透率
★ 吸水膨潤性
★ 開環歧化聚合反應
★ 釕金屬觸媒
★ 鎳金屬觸媒
★ 環烯烴
★ 磺酸根
★ 聚醚醚酮
★ 質子傳導膜
★ 質子導電度關鍵字(英) ★ Ring Opening Metathesis Polymerization
★ ROMP
★ Ru catalyst
★ Methanol Cross-over
★ proton exchange membranes
★ Direct Methanol Fuel Cell
★ Swelling test
★ Nafion
★ Proton conductivity
★ organic Ni catalyst
★ Norborene monomer
★ sulfonated
★ cyclo-olefin based polymer論文目次 摘 要.............................................................................................................. I
Abstract ............................................................................................................. III
謝 誌............................................................................................................ V
目 錄........................................................................................................... VI
Equation ............................................................................................................ IX
Figure ................................................................................................................. X
Scheme .............................................................................................................. XI
Table............................................................................................................... XIII
附錄目錄........................................................................................................ XIV
第1 章 緒論....................................................................................................... 1
1-1 前言.................................................................................................. 2
1-2 燃料電池之導論.............................................................................. 5
1-3 甲醇燃料電池之結構與原理.......................................................... 8
1-4 常見質子傳導膜之種類.................................................................. 9
1-5 各項重要測量參數........................................................................ 13
1-6 研究動機和目的............................................................................ 14
第2 章 實驗部分............................................................................................. 29
2-1 實驗藥品........................................................................................ 30
2-1-1 實驗所使用之化學藥品..........................................................30
2-1-2 實驗所使用之溶劑...................................................................32
2-1-3 溶劑除水的部分.......................................................................33
2-2 實驗儀器及技術原理.................................................................... 34
2-2-1 核磁共振光譜儀 (Nuclear Meganetic Resonance);Bruker
AVANCE 200 / 300 / 500 MHz............................................34
2-2-2 紅外線吸收光譜儀 (FT-Infrared Spectrometer);JASCO
FT/IR-4100 .............................................................................35
2-2-3 熱重分析儀 (Thermogravimetric analysis, TGA);Mettler
Toledo TGA/SDTA 851.........................................................35
2-2-4 差式熱掃描卡計 (Differential scanning calorimeter,
DSC);Mettler Toledo DSC 822.........................................36
2-2-5 交流阻抗儀 (AC-impedance);Autolab Pgstat30 AUT
system ......................................................................................36
2-2-6 吸水、吸溶劑膨潤比 (Water uptake、Solvent uptake) ...37
2-2-7 離子交換容量 (Ion Exchange Capacity;IEC)...................37
2-2-8 薄膜抗氧化能力之測試 (Fenton’s test)...............................38
2-2-9 甲醇滲透率 (Methanol permeability) ...................................38
2-3 合成步驟........................................................................................ 40
2-3-1 環烯烴單體的合成...................................................................40
2-3-2 催化劑的合成與環烯烴單體的聚合反應............................53
2-3-3 Norbornene 導入PEEK 之聚合反應....................................64
2-4 高分子薄膜的製備........................................................................ 66
2-4-1 高分子質子傳導膜常見之製備方法....................................66
2-4-2 含sultone 基團之高分子薄膜開環反應..............................68
2-4-3 Vinyl-addition 類型環烯烴高分子成膜方法.......................69
2-4-4 開環歧化類 (ROMP) 環烯烴高分子之成膜方法.............73
2-4-5 Norbornene 單體導入SPEEK 類高分子之成膜方法........78
第3 章 結果與討論......................................................................................... 79
3-1 Vinyl-addition 類型之高分子........................................................ 80
3-1-1 Vinyl-addition 類型之高分子溶解度之探討.......................81
3-1-2 Vinyl-addition 類型之高分子官能基之探討.......................82
3-1-3 NB/NB-OH-sultone 薄膜之探討............................................83
3-2 UV/heat 加工之高分子.................................................................. 83
3-2-1 heat 加工之高分子探討..........................................................83
3-2-2 UV 加工之高分子探討...........................................................85
3-3 ROMP 類型之高分子.................................................................... 87
3-3-1 ROMP 類型之高分子結構之探討........................................87
3-3-2 ROMP 類型之高分子熱穩定性之探討................................89
3-3-3 ROMP 類型之高分子薄膜之探討........................................91
第四章 結論..................................................................................................... 94
參考文獻...........................................................................................................96
附 錄……………………………………………………………………...99參考文獻 1. (a) Elabd, Y. A.; Napadensky, E.; Walker, C. W.; Winey, K. I. Macromolecules; 2006; 39(1); 399-407. (b) Tan, S.; Tieu, J. H.; Belanger, D. J. Phys. Chem. B.; 2005; 109(29); 14085-14092. (c) K.; Tazaki, T.; Matsubara, R.; Nishide, H. Ind. Eng. Chem. Res.; 2005; 44(23); 8626-8630. (d) Arcella, V.; Troglia, C.; Ghielmi, A. Ind. Eng. Chem. Res.; 2005; 44(20); 7646-7651. (e) Chen, S.-L.; Benziger, J. B.; Bocarsly, A. B.; Zhang, T. Ind. Eng. Chem. Res.; 2005; 44(20); 7701-7705. (f) Chikashige, Y.; Chikyu, Y.; Miyatake, K.; Watanabe, M. Macromolecules; 2005; 38(16); 7121-7126. (g) Ames, R. L.; Way, J. D.; Bluhm, E. A.; Knauss, D. M.; Singh, R. P.; Hensley, J. E. Ind. Eng. Chem. Res.; 2005; 44(10); 3672-3680. (h) Chen, Y. L.; Meng, Y. Z.; Hay, A. S. Macromolecules; 2005; 38(9); 3564-3566. (i) Gao, Y.; Robertson, G. P.; Guiver, M. D.; Mikhailenko, S. D.; Li, X.; Kaliaguine, S. Macromolecules; 2005; 38(8); 3237-3245.
2. (a) Rubatat, L.; Shi, Z.; Diat, O.; Holdcroft, S.; Frisken, B. J. Macromolecules; 2006; 39(2); 720-730. (b) Tan, S.; Belanger, D. J. Phys. Chem. B.; 2005; 109(49); 23480-23490. (c) Xiao, L.; Zhang, H.; Scanlon, E.; Ramanathan, L. S.; Choe, E.-W.; Rogers, D.; Apple, T.; Benicewicz, B. C. Chem. Mater.; 2005; 17(21); 5328-5333. (d) Zhang, Y.; Erkey, C. Ind. Eng. Chem. Res.; 2005; 44(14); 5312-5317. (e) Park, H.; Kim, Y.; Hong, W. H.; Choi, Y. S.; Lee, H. Macromolecules; 2005; 38(6); 2289-2295. (f) Rhee, C. H.; Kim, H. K.; Chang, H.; Lee, J. S. Chem. Mater.; 2005; 17(7); 1691-1697. (g) Deng, W.-Q.; Molinero, V.; Goddard, W. A., III J. Am. Chem. Soc.; 2004; 126(48); 15644-15645. (h) Holmberg, S.; Holmlund, P.; Nicolas, R.; Wilen, C.-E.; Kallio, T.; Sundholm, G.; Sundholm, F. Macromolecules; 2004; 37(26); 9909-9915.
3. (a) Michael A. Hickner, Hossein Ghassemi, Yu Seung Kim, Brian R. Einsla, James
E. McGrath. Chem. Rev.; 2004; 104, 4587- 4612. (b) Ibrahim, S. M.; Price, E. H.;
Smith, R. A., of E. I. du Pont de Nemours. Proc. Electrochem. Soc. 1983, 83-6. (c)
Resnick, P. R.; Grot, W. G., of E. I. du Pont de Nemours and Company, Wilmington,
DE, Sept 12, 1978; U.S. Patent 4,113, 585.
4. 新穎質子交換膜, 吳千舜, 2004, 國立中央大學化學研究所碩士論文
5. 資料來源:SRI/PEP 223, Jul 1998、www.teamzeon.com/docs/COP616_files/frame.htm/化工所ITIS 計畫整理
6. Toyota Central Research & Development Lab Inc, Japanese published Patent
Application No.2001-019723.
7. Ki Hong Park, Robert J. Twieg, R. Ravikiran, Larry F. Rhodes,Robert A. Shick,
Diego Yankelevich, and Andre Knoesen. Macromolecules 2004, 37, 5163-5178.
8. Zhou, Z.; Dominey, R. N.; Rolland, J. P.; Maynor, B. W.; Pandya, A. A.; DeSimone,
J. M. J. Am. Chem. Soc. 2006; ASAP Article
9.(a) Ravikiran, R; Rhodes, L. F.; Bell, A.; Jayaraman, S.; Lipian, J.-H.; Shick, R. A .
US Patent 2005, 0019639. (b) K. F. Ho, Dennis C. W. Fung, W. Y. Wong, W. H.
Chan* and Albert W. M. Lee. Tetrahedron Letters 2001, 42, 3121. (c) La sheng
Jiang, Wing Hong Chan, Albert W. M. Lee. Tetrahedron 1999, 55, 2245. (d) William
E. Truce, Fred D. Hoerger J. Am. Chem. Soc.; 1954; 76(21); 5357.
10. Kerstin Mu¨ ller, Stefan Kreiling, Kurt Dehnicke, Ju¨rgen Allgaier, Dieter Richter,
Lewis J. Fetters, Youngsuk Jung,Do Y. Yoon, Andreas Greiner. Macromol. Chem.
Phys. 2006, 207, 193–200.
11. (a) Shaw-Tao Lin, Richard N. Narske, and Kenneth J. Klabunde. Organometallics
1985, 4, 571-574. (b) Michael M. Brezinski and Kenneth J. Klabunde.
Organometallics 1983, 2, 1116-1123. (c) Narayanankutty Pariyadath, W. E. Newton,
Edward 1. Stiefel. J. Am. Chem. Soc. 1976, 98, 5390. (d) Robert G. Gastinger, Bruce
B. Anderson, and Kenneth J. Klabunde. J. Am. Chem. Soc. 1980,102, 4959-4966. (e)
Rhodes, L. F.; Bell, A.; Jayaraman, S.; Lipian, J.-H.; Goodall,B. L.; Shick, R. A. US
Patent 6,232,417, 2001. (f) M.Bader; Bruce B. Anderson; Kenneth J. Klabunde.
Inorganic Syntheses 1979,19, 72.
12. B. B. Anderson, M. Bader, and Kenneth J. Klabunde. Inorganic Syntheses 1979,
19, 72-74.
13. (a) Tina M. Trnka, Robert H. Grubbs. Acc. Chem. Res. 2001, 34, 18-29. (b)
SonBinh T. Nguyen, Lynda K. Johnson, and Robert H. Grubbs J. Am. Chem. Soc.
1992, 114, 3974-3975. (c) Bruce M. Novak and Robert H. Grubbs J. Am. Chem. Soc.
1988, 110, 7542-7543. (d) SonBinh T. Nguyen' and Robert H. Grubbs J. Am. Chem.
Soc. 1993,115, 9858-9859. (e) Oren A. Scherman, Isaac M. Rutenberg, and Robert
H. Grubbs. J. Am. Chem. Soc. 2003, 125, 8515-8522. (f) Todd R. Younkin, Eric F.
Connor, Jason I. Henderson, Stefan K. Friedrich, Robert H. Grubbs, Donald A.Bansleben. SCIENCE 2000, 287, 460.
14. Li, Q.; He, R.; Jensen, J. O.; Bjerrum, N. J. Chem. Mater. 2003, 15(26),
4896-4915.指導教授 陳銘洲(Ming-chou Chen) 審核日期 2007-7-25 推文 plurk
funp
live
udn
HD
myshare
netvibes
friend
youpush
delicious
baidu
網路書籤 Google bookmarks
del.icio.us
hemidemi
myshare