193nm深紫外光學薄膜之研究

以作者查詢圖書館館藏

、以作者查詢臺灣博碩士

、以作者查詢全國書目

、勘誤回報

、線上人數：58

、訪客IP：3.133.131.180

姓名

劉旻忠(Ming-Chung Liu) 查詢紙本館藏

畢業系所

光電科學與工程學系

論文名稱

193nm深紫外光學薄膜之研究
(The research of optical thin films in DUV at 193nm)

相關論文

★ 半導體雷射控制頻率	★ 比較全反射受挫法與反射式干涉光譜法在生物感測上之應用
★ 超晶格結構之硬膜研究	★ 交錯傾斜微結構薄膜在深紫外光區之研究
★ 膜堆光學導納量測儀	★ 紅外光學薄膜之研究
★ 成對表面電漿波生物感知器應用在去氧核糖核酸及微型核糖核酸雜交反應檢測	★ 成對表面電漿波生物感測器之研究及其在生醫上的應用
★ 探討硫化鎘緩衝層之離子擴散處理對CIGS薄膜元件效率影響	★ 以反應性射頻磁控濺鍍搭配HMDSO電漿聚合鍍製氧化矽摻碳薄膜阻障層之研究
★ 掃描式白光干涉儀應用在量測薄膜之光學常數	★ 量子點窄帶濾光片
★ 以量測反射係術探測光學薄膜之特性	★ 嵌入式繼光鏡顯微超頻譜影像系統應用在口腔癌切片及活體之設計及研究
★ 軟性電子阻水氣膜之有機層組成研究	★ 利用介電質-金屬對稱膜堆設計雙曲超穎材料並分析其光學特性

檔案

[Endnote RIS 格式]

[Bibtex 格式]

[相關文章]

[文章引用]

[完整記錄]

[館藏目錄]

至系統瀏覽論文 ( 永不開放)

摘要(中)

本文中主要研究探討波長193nm深紫外光之光學薄膜，材料以氟化鎂(MgF2)、氟化鑭(LaF3)、氟化鋁(AlF3)與氟化釓(GdF3)四種為主，氟化鎂和氟化鑭以熱阻舟蒸鍍(Resistive Heating Boat Evaporation)與電子束蒸鍍(Electron Beam Gun Evaporation)的方式製鍍光學薄膜，而氟化鋁(AlF3)與氟化釓(GdF3)則只以熱阻舟蒸鍍為主，主要探討薄膜的光學特性、機械特性(應力)、微觀結構與雷射破壞(Laser Damage)。
本文並以離子助鍍(Ion Assisted Deposition)方式，研究離子助鍍對薄膜的影響；在薄膜後處理方面則是藉由高溫退火、紫外光照射與雷射退火的方式來對氟化物薄膜處理，研究對膜質特性的影響，希望藉由離子助鍍以及各種後處理的方式來達到改變膜質，進而達到提高折射率、降低光學損耗以及提高雷射損壞的閥值等。
最後以四種氟化物互相搭配，以抗反射膜和高反射鏡的設計方式，實際製作成品並量測多層膜的特性，加以分析和討論。如此由單一膜層的特性到多層膜堆應用作一系列完整的研究，最後並且給予四種氟化物製鍍參數上的建議。

摘要(英)

Optical coating technologies in the deep-ultraviolet at 193nmhave has been researched. Magnesium fluoride thin films and lanthanum fluoride thin films were deposited by resistive heating boat (RH) and electron beam evaporation (EB). Aluminum fluoride thin films and gadolinium fluoride thin films were prepared by RH. The relation of fluorides thin films between the microstructures (including cross section morphology, surface roughness and crystalline structure), the optical properties (including refractive index and optical loss), laser-induced damage threshold (LIDT) and mechanical properties (stress) were investigated. The characteristics and influence of thin films were also studied by ion-assisted deposition (IAD), thermal annealing, ultraviolet light irradiation and laser annealing. The surface roughness, optical loss, stress and LIDT of the films were improved after these treatment.
Anti-reflection coatings and multi-layers coatings were designed and deposited by using above four fluoride materials. Then the characteristics of coatings were discussed and compared with each other. Finally, the best deposition parameter of the four fluoride materials were suggested by this research.

關鍵字(中)

★ 雷射破壞
★ 光學薄膜
★ 氟化鎂
★ 氟化鑭
★ 氟化鋁
★ 氟化釓
★ 微觀結構
★ 光學特性
★ 折射率
★ 光學損耗
★ 應力

關鍵字(英)

★ Refractive Index
★ Laser-Induced Damage Threshold (LIDT)
★ Optical thin films
★ MgF2
★ LaF3
★ GdF3
★ AlF3
★ Microstructures
★ Optical Properties
★ Stress
★ Optical Loss

論文目次

中文摘要………………………………………………………………………………I
英文摘要………………………………………………………………………………II
目錄……………………………………………………………………………………III
圖目錄…………………………………………………………………………………V
表目錄…………………………………………………………………………………XII
第一章緒論……………………………………………………………………………1
1-1研究動機……………………………………………………………………………1
1-2研究方法……………………………………………………………………………2
1-3氟化物的材料特性…………………………………………………………………3
1-4文獻回顧……………………………………………………………………………5
第二章基本原理………………………………………………………………………7
2-1能帶間隙( Energy Band Gap )…………………………………………………7
2-2薄膜應力(Stress)......…………………………………………………………10
2-3 SZM (Structure Zone Model)模型……………………………………………12
2-4雷射破壞(Laser Damage)…………………………………………………………13
第三章研究方法………………………………………………………………………16
3-1實驗設備……………………………………………………………………………16
3-1-1基板的準備………………………………………………………………………16
3-1-2鍍膜機的架構……………………………………………………………………16
3-1-3實驗參數…………………………………………………………………………17
3-2量測方法與儀器……………………………………………………………………22
3-2-1光學薄膜特性的量測……………………………………………………………22
3-2-2微觀結構的量測………………………………………………………23
3-2-3薄膜應力的量測………………………………………………………26
3-2-4薄膜的成分分析………………………………………………………27
3-2-5 LIDT的量測…………………………………………………………27
第四章結果與討論 ……………………………………………………………………29
4-1氟化鎂單層膜的特性討論…………………………………………………………29
4-1-1熱阻舟蒸鍍氟化鎂薄膜的特性…………………………………………………29
4-1-2電子槍蒸鍍氟化鎂薄膜的特性…………………………………………………35
4-1-3熱阻舟蒸鍍(RH)和電子束蒸鍍(EB)氟化鎂薄膜之比較………………………41
4-2氟化鑭單層膜的特性討論…………………………………………………………46
4-2-1熱阻舟製鍍氟化鎂薄膜的特性…………………………………………………46
4-2-2電子束蒸鍍氟化鑭薄膜的特性…………………………………………………53
4-2-3熱阻舟(RH)和電子束蒸鍍(EB)製鍍氟化鑭薄膜之比較………………………59
4-3氟化鋁單層膜的特性………………………………………………………………66
4-4氟化釓單層膜的特性結果與討論…………………………………………………73
4-5離子源助鍍對氟化物薄膜的影響…………………………………………………80
4-5-1熱阻舟蒸鍍氟化鎂薄膜輔之以離子源(IAD)助鍍………………………………80
4-5-2電子束蒸鍍氟化鎂薄膜輔之以離子源(IAD)助鍍………………………………86
4-5-3熱阻舟蒸鍍氟化鑭薄膜輔之以離子源(IAD)助鍍………………………………91
4-5-4電子束蒸鍍氟化鑭薄膜輔之以離子源(IAD)助鍍………………………………97
4-6退火對氟化物薄膜的影響…………………………………………………………102
4-6-1退火對氟化鎂薄膜的影響………………………………………………………102
4-6-2退火(Annealing)對氟化鑭薄膜的影響…………………………………………109
4-6-3退火(Annealing)對氟化鋁與氟化釓薄膜的影響………………………………119
4-7多層模的分析與討論…………………………………………………………………121
第五章結論………………………………………………………………………………131
參考文獻……………………………………………………………………………………134

參考文獻

1. O. R. Wood II, H. G. Craighead, J. E. Sweeney, P. J. Maloney , ’’Vacuum ultraviolet loss in magnesium fluoride films,” Appl. Opt. 23, 3644-3649 (1984).
2. Y. Uchida, R. Kato, E. Matsui, “Optical properties of some solids in the vacuum ultraviolet,” J. Quant. Spectry. Radiat. Transfer. 2, 589-598 (1962).
3. W. Hayes, Crystals With The Fluorite Structure, Oxford , Eng., chap.1, (1974).
4. J. Ullmann, C. Zaczek, A. Pazidis, J. Lüdecke, B. von Blanckenhagen, D. Tonova, “Optical coatings for VUV applications”, Optical Interference Coatings Conference, Banff, Alberta, Canada, ThB4 (2001).
5. S. Günster, P. Kadkhoda, D. Ristau, ”Online spectrophotometric characterisation of MgF2/LaF3-fluoride multilayer coatings production”, Optical Interference Coatings Conference, Banff, Alberta, Canada, ME9 (2001).
6. D. Ristau, S. Günster, S. Bosch, A. Duparré, E. Masetti, J. Ferré-Borrull, G. Kiriakidis, F. Peiró, E. Quesnel, and A. Tikhonravov, ”UV-optical and microstructural properties of MgF2- and LaF3-coatings deposited by IBS and PVD processes”, Optical Interference Coatings Conference, Banff, Alberta, Canada, ThA5 (2001).
7. S. Niisaka, M. Otani, R. Biro, C. Ouchi, M. Hasegawa, Y. Suzuki, T. Saito, J. Saito, A. Tanaka, K. Sone, A. Matsumoto, ”Development of optical coatings for 157nm lithography ( I: Coating Materials )”, Optical Interference Coatings Conference, Banff, Alberta, Canada, ThB7 (2001).
8. S. Niisaka, T. Saito, J. Saito, A. Tanaka, A. Matsumoto, M. Otani, R. Biro, C. Ouchi, M. Hasegawa, Y. Suzuki, K. Sone “Development of optical coatings for 157-nm lithography. 1. Coating materials.” Appl. Opt. 41, 3242-3247 (2002).
9. Y. Taki, “Structures and optical constants of magnetron-sputtered fluoride coatings for deep ultraviolet lithography”, The 7th International Symposium on Sputtering and Plasma Process, (Kanagawa, Japan), 439-442 (2003).
10. D. Ristau, S. Günster, S. Bosch, A. Duparré, E. Masetti, J. Ferré-Borrull, G. Kiriakidis, F. Peirò, E. Quesnel and A. Tikhonravov, “ Ultraviolet optical and microstructural properties of MgF2 and LaF3 coatings deposited by ion-beam sputtering and boat and electron-beam evaporation”, Appl. Opt. 41, 3196-3204 (2002).
11. E. Quesnel, L. Dumas, D. Jacob, F. Peiro, ” Optical and microstructural properties of MgF2 UV coatings grown by ion beam sputtering process”, J. Vac. Sci. Tech.- Section A - Vacuum Surfaces and Films 18, 2869-2876 (2000).
12. J. Y. Robic, V. Muffato, P. Chaton, M. Ida, M. Berger, “ Optical and structural properties of YF3 thin films prepared by ion assisted deposition or ion beam sputtering techniques”, SPIE 2253, 195-203 (1994).
13. J. G. Cook, G. H. Yousefi, S. R. Das, D. F. Mitchell, “ R.F. magnetron deposition of calcium fluoride”, Thin Solid Films 217, 87-90 (1992).
14. T. Yusuke, M. Kenichi, “Hetero-epitaxial growth and optical properties of LaF3 on CaF2”, Thin Solid Films 420, 30-37 (2002).
15. U. Kaiser, N. Kaiser, P. Weiβbrodt, U. Mademann, E. Hacker, H. Müller, “ Structure of thin fluoride films deposited on amorphous substrates”, Thin Solid Films 217, 7-16 (1992).
16. C. R. Giuliano, ”Laser-induced damage to transparent dielectric materials”, Appl. Phys. Lett. 5, 37-139 (1964).
17. J. Kolbe, H. Kessler, T. Hofman, F. Meyer, H. Schink, D. Ristau, “Optical properties and damage thresholds of dielectric UV/VUV-coatings deposited by conventional evaporation, IAD and IBS”, SPIE 1624, 221-235 (1991).
18. S. G. Demos, M. Staggs, “Characterization of laser induced damage sites in optical components”, Optics Express 10, 1444-1450 (2002).
19. S. Petzoldt, A. P. Eig, M.Reichling, J. Reif, and E. Matthias, ”Surface laser damage threshold determined by photoacoustic deflection”, Appl. Phys. Lett. 53, 2005-2007 (1988).
20. F. Rainer, W. H. Lowdermilk, D. Milam, T. Tuttle Hart, T. L. Lichtenstein, and C. K. Carniglia, ”Scandium oxide coatings for high-power UV laser applications”, Appl. Opt. 21, 3685-3688 (1982).
21. Z. Czigany, M. Adamik, N. Kaiser, “248 nm laser interaction studies on LaF3/MgF2 optical coatings by cross-sectional transmission electron microscopy”, Thin Solid Films 312, 182-187 (1998).
22. M. Alvisi, M. Di Giulio, S.G. Marrone, M.R. Perrone, M.L. protopapa, A, Valentini, L. Vasanelli, “HfO2 films with high laser damage threshold”, Thin Solid Films 358, 250-258 (2000).
23. M. Alvisi, F. De Tomasi, M. R. Perrone, M. L. Protopapa, A. Rizzo, F. Sarto, S. Scaglione, “Laser damage dependence on structural and optical properties of ion-assisted HfO2 thin films”, Thin Solid Films 396, 44-52 (2001).
24. P. J. Martin and R. P Netterfield, “Optical films produced by Ion-based Techniques”, Prog. Opt. 23, 114-182 (1986).
25. C. M. Kennemore III and U. J. Gibson, “Ion beam processing for coating MgF2 onto ambient temperature substrates”, Appl. Opt. 23, 3608-3611 (1984).
26. P. J. Martin and R. P. Netterfield, “Ion assisted deposition of magnesium fluoride films on substrates at ambient temperature”, Appl. Opt. 24, 1732-1733 (1985).
27. P. J. Martin, W. G. Sainty, R. P. Netterfield, D. R. Mckenzie, D. J. H. Cockayne, S. H. Sie, O. R. Wood, H. G. Craighead, “ Influence of ion assistance on the optical properties of MgF2”, Appl. Opt.26, 1235-1239 (1987).
28. J. D. Targove, J. P. Lehan, L. J. Lingg, H. A. Macleod, J. A. Leavitt, and L. C. Mclntyre, Jr., “Ion-assisted deposition of lanthanum fluoride thin films”, Appl. Opt. 25, 3733-3737 (1987).
29. G. Atanassov, J. Turlo, J. K. Fu, Y. S. Dai, “Mechanical, optical and structural properties of TiO2 and MgF2 thin films deposited by plasma ion assisted deposition.” Thin Solid Films 342, 83-92 (1999).
30. D. G. McCulloch, A. R. Merchant, “The effect of annealing on the structure of cathodic arc deposited amorphous carbon nitride films”, Thin Solid Films 290-291, 99-102 (1996).
31. Y. Zhao, Y. Wang, H.i Gong, J. Sshao, Z. Fan, “Annealing effects on structure and laser-induced damage threshold of Ta2O5/SiO2 dielectric mirrors”, Applied Surface Science 210, 353-358 (2003).
32. Q. Fang, J.-Y. Zhang, Z. M. Wang, J.X. Wu, B.J. O’Sullivan, P. K. Hurley, T. L. Leedham, H. Davies, M. A. Audier, C. Jimenez, J. P. Senateur, I. W. Boyd, “Interface of tantalum oxide films on silicon by UV annealing at low temperature”, Thin Solid Films 428, 248-252 (2003).
33. Y. Q. Hou, D. M. Zhuang, G. Zhang, M. Zhao, M. S. Wu, “ Influence of annealing temperature on the properties of titanium oxide thin film”, Applied Surface Science 218, 97-105 (2003).
34. E. Hucker, H. Lauth, P. Weissbrodt, “Review of structural influence on the laser damage threshed of oxide coatings”, SPIE 2714, 316-330 (1996).
35. H. K. Pulker, “Characterization of optical thin films”, Appl. Opt. 18, 1969-1977 (1979).
36. M. W. Williams, R. A. MacRae and E. T. Arakawa, ”Optical properties of magnesium fluoride in the vacuum ultraviolet”, J. Appl. Phys. 38, 1701-1705 (1967).
37. Y. Toyozawa, “Interband effect of lattice vibrations in the excitation absorption Spectra”, J. Phys. Chem. Solids 25, 59-71 (1964).
38. H. Fröhlich and H. Pelzer, “Plasma oscillations and energy loss of charged particles in solids”, Proc. Phys. Soc. (London) A68, 525-529 (1955).
39. D. Pines, “Collective energy losses in solids”, Rev. Mod. Phys. 28, 184-198 (1956).
40. A. Milgram and M. Parker Givens, “Extreme ultraviolet absorption by lithium fluoride”, Phys. Rev. 125, 1506-1509 (1961).
41. S. G. Malhotra. Z. U. Rek, S. M. Yalisove, J. C. Bilello, “Analysis of thin film stress measurement techniques” Thin Solid Films 301, 45-54 (1997).
42. 田春林,”光學薄膜應力與熱膨脹係數量測之研究”, 國立中央大學光電所博士論文, (1990).
43. B. A. Movchan and A. V. Demshichin, “Study of the structure and properties of the vacuum condensation of nickel, titanium, tungsten, aluminium oxide, and zirconium dioxide”, Fiz. Met. Metall 28, 653-660 (1969).
44. J. A. Thornton, ”Influence of apparatus geometry and deposition conditions on the structure and topography of thick sputtered coatings”, J. Vac. Sci. Technol. 11, 666-670 (1974).
45. R. Messier, A. P. Giri and R. A. Roy, ”Revised structure zone model for thin physical structure”, J. Vac. Sci. Technol. A2, 500-503 (1984).
46. U. Kaiser, N. Kaiser, P. Weiβbrodt, U. Mademann, E. Hacker and H. Müller, “Structure of thin fluoride films deposited on amorphous substrates”, Thin Solid Films 217, 7-10 (1992).
47. U. Kaiser, M. Adamik, G. Safran, P. B. Barna, S. Laux and W. Richter, “Growth structure investigation of MgF2 and NdF3 films grown by molecular beam Deposition on CaF2(111) Substrates”, Thin Solid Films 280, 5-15 (1996).
48. J. Bonse, S. Baudach, W. Kautek, E. Welsch, J. Kr ger, ” Femtosecond laser damage of high reflecting mirror.”, Thin solid films 408, 297-301 (2002).
49. E. Welsch, K. Ettrich, H. Blaschke, N. Kaiser, ”Excimer laser interaction with dielectric thin films”, Applied. Surface Science 96-98, 393-398 (1996).
50. R. M. Wood. ”Laser induced damage thresholds and laser safety levels. Do the units of measurement matter”, Optics & Laser technology 29, 517-512 (1997).
51. W. Howard Lowdermilk and David Milam, “Lser-induced suface and coating damage.”, IEEE Journal of Quantum Electronics, QE17, 374-389 (1981).
52. O. Paredes, C. Cόrdoba, J. Benavides, “Optical constants determination in thin films lead-free vitreous coatings”, 1999Sociedad Mexicana de Ciencias de Superficie y e Vacio, Superficies y Vaco 9, 89-91 (1999).
53. P. J. Martin, H. A. Macleod, R. P. Netterfield, C. G. Pacey, W.G. Sainty, ”Ion-beam-assisted deposition of thin films”, Appl. Opt. 22, 179-185 (1983).

指導教授

李正中(Cheng-Chung Lee)

審核日期

2005-7-20

推文