姓名 |
張志鴻(Chang Chih Hung)
查詢紙本館藏 |
畢業系所 |
土木工程學系在職專班 |
論文名稱 |
半導體廠房毒化物氣體偵測器校正作業最佳化之研究
|
相關論文 | |
檔案 |
[Endnote RIS 格式]
[Bibtex 格式]
[相關文章] [文章引用] [完整記錄] [館藏目錄] [檢視] [下載]- 本電子論文使用權限為同意立即開放。
- 已達開放權限電子全文僅授權使用者為學術研究之目的,進行個人非營利性質之檢索、閱讀、列印。
- 請遵守中華民國著作權法之相關規定,切勿任意重製、散佈、改作、轉貼、播送,以免觸法。
|
摘要(中) |
半導體廠內所使用的化學品、毒性氣體種類多且愈來愈複雜,關注的細節也愈來愈多,若發生洩漏事故將會擴散及影響到附近所有人員身體健康,故廠房內必須設置氣體洩漏警報偵測器,而氣體偵測器具有同步偵測、即時發出警報的功能;務必要確認偵測器的讀值準確可靠,否則可能因誤警報而造成更大的損失,故偵測器必須定期針對Sensor進行校正,現實的工作環境之下,此類校正作業之工作大多發包予廠商負責,校正指派常依據經驗來安排,並根據處理商的合約規範以及現有的資源進行人員校正指派作業,較缺乏以系統化、科學化之分析做整體考量,易造成校正人員校正數量、作業區域分配不平均,並有失公平原則。
有鑑於此,本研究為解決上述問題,故利用數學線性0-1整數規劃方法,針對校正作業人員指派所需要之需求及限制條件進行設定,規劃出一套適合校正人力指派最佳化之數學整數規劃模式,利用Office Excel 2007輸入各項參數資料及輸出執行結果,再利用LINGO12.0套裝軟體進行求解。除可達到校正作業其人員公平指派之目的,也可幫助決策者進行更有效率的指派規劃,更可因人力數量條件之不同或限制條件改變,來進行各參數調整設定,重新規劃及調整校正人員之指派。 |
摘要(英) |
The chemicals and poisonous gases in the semi-conductor factories are getting more diversified and complicated, so more and more details are concerned. If leakage accident occurs, it will diffuse and impact the physical health of all personnel nearby. Thus, the plant must be equipped with gas leakage sensors, which should have the functions of synchronous detection and real-time alarming. Moreover, it must confirm the value read on the sensor is accurate and reliable, or it may cause greater loss due to the false alarming. Therefore, the sensor should be conducted with calibration periodically. In practice, such calibration operation is usually performed by the manufacturer, and the calibration assignment is arranged based on the experience. The calibration personnel are assigned based on the vendor’s contractual terms and the existing resources. It lacks overall consideration based on systematic and scientific analysis, which may easily result in uneven distribution and unfairness in terms of the calibration personnel, calibration quantity, and operation region.
In view of this, to resolve above problems, the study uses the mathematical linear 0-1 integer Programming method to set the requirements and limitations for assigning the calibration personnel, and finally work out a mathematic integer planning model applicable to optimizing the calibration personnel assignment. It inputs various parameter data and outputs the execution results by using Office Excel 2007, and then calculates the solution by using LINGO12.0 software package. Besides achieving the purpose of assigning calibration personnel fairly, it can also help the decision-makers perform assignment and planning more efficiently. Moreover, the parameters can be adjusted or set based on different manpower or limitations, so as to re-plan and adjust the assignment of calibration personnel. |
關鍵字(中) |
★ 氣體偵測器 ★ 校正作業 ★ 0-1整數規劃 ★ 最佳化指派 ★ LINGO |
關鍵字(英) |
★ Gas Sensor ★ Calibration Operation ★ 0-1 Integer Programming ★ Assignment Optimization ★ LINGO |
論文目次 |
摘要 I
Abstract II
誌謝 IV
目錄 V
圖目錄 VIII
表目錄 IX
附表目錄 X
一、緒論 1
1-1 研究背景與動機 1
1-2 研究的目的與範圍 3
1-2-1 研究目的 3
1-2-2 研究範圍 3
1-3 研究方法與流程 3
二、文獻回顧 6
2-1 人員指派最佳化相關文獻 6
2-2 文獻評述 8
三、模式構建及求解方法 9
3-1 問題描述及現況做法 9
3-1-1 問題描述 9
3-1-2 現況做法 10
3-2 模式建立 11
3-2-1 假設條件、參數及決策變數定義 11
3-2-2 數學模式 13
3-2-3 模式應用 15
3-3 求解方法與步驟 16
3-3-1 本研究求解方法 16
3-3-2 本研究求解步驟 16
3-4 小結 17
四、範例測試 18
4-1資料分析 18
4-1-1問題規模 18
4-1-2決策變數之擬定 21
4-1-3範例測試基本參數資料之擬定 25
4-2測試與結果分析 26
4-2-1電腦演練環境 26
4-2-2 本模式輸出結果 27
4-2-3 本模式指派結果分析 28
4-3 人工經驗指派結果與分析 30
4-4本研究模式與人工經驗指派模式效益分析比較 31
4-5敏感度分析 33
4-5-1 校正總天數調整增減之敏感度分析 33
4-5-2 校正總人力調整增減之敏感度分析 34
4-5-3 氣體鋼瓶(同步)調整增減之敏感度分析 35
4-5-4 氣體鋼瓶(Cl2)調整增減之敏感度分析 36
4-5-5 氣體鋼瓶(PH3)調整增減之敏感度分析 37
4-5-6 無塵室作業區域加權值增減調整變化之敏感度分析 38
4-6小結 39
五、結論與建議 40
5-1結論 40
5-2建議 41
參考文獻 43
附錄 45
|
參考文獻 |
1.丁榮堂,「電廠大修人力指派最佳決策模式之研究-以水力電廠為例」,國立中央大學,碩士論文,2009年。
2.王勵維,「測量作業人力指派最佳化」,國立中央大學,碩士論文,2013年。
3.林瑜禎,「自來水管線維修工程人員機具指派最佳化」,國立中央大學,碩士論文,2011年。
4.朱惠民,「半導體廠機台自動滅火系統測試人員指派最佳化模式之研究」國立中央大學,碩士論文,2014年。
5.行政院環保署,「毒性化學物質應變器材及偵測與警報設備管理辦法」環署毒字第0960095745號,2007年。
6.官明郎,「設計作業人員指派最佳決策模式之研究」,中國土木水利工程學刊,18(1),135 -144頁,2006年。
7.陳瑛琺,「公園巡查人力指派最佳化之探討」,國立中央大學,碩士論文,2011年。
8.黃世豪,「半導體廠廢溶劑清運指派最佳化模式之研究」,國立中央大學,碩士論文,2014年。
9.楊宗仁,「科技廠房修繕人力派遣最佳化決策模式之研究」,國立中央大學,碩士論文,2006年。
10.楊國隆、熊高生,作業研究入門導引:使用LINGO,初版,文魁資訊,台北,2009年。
11.顏上堯、呂理卿、施佑林,「營建人機作業指派最佳化決策模式之研究」,技術學刊,23(2),137-148頁,2008年。
12.顏上堯,「最佳化設計與管理」講義,國立中央大學,2010年。
13.Azaiez, M.N. and Al Sharif, S.S., “A 0-1 Goal Programming Model For Nurse Scheduling”, Computers and Operations Research, 32, 3, 491-507, 2005.
14.Burke, E.K., Causmaecker, P.De., Berghe G.V. and Van Landeghem, H., “The State Of The Art Of Nurse Rostering”, The Journal of Scheduling, 7, 6, 441-499, 2004.
15.Calibration for Gas Detectors, Drager Safety Services, Taiwan, November 2007.
16.Claudia, A.A., Carola, A.B. and Alejandro, L., “Urban solid Waste Collection System Using Mathematical Modeling And Tools Of Geographic Information Systems”, Waste Management & Research, 28, 355-363, 2010.
17.Panagiotis, M., Giannikos, I.and Mitropoulos, I., “Exact And Heuristic Approaches For The Locational Planning Of An Integrated Solid Waste Management System”, Operational Research, 9, Number 3, 2009.
|
指導教授 |
顏上堯(Yan San Yao)
|
審核日期 |
2015-6-30 |
推文 |
facebook plurk twitter funp google live udn HD myshare reddit netvibes friend youpush delicious baidu
|
網路書籤 |
Google bookmarks del.icio.us hemidemi myshare
|