![]() |
|
以作者查詢圖書館館藏 、以作者查詢臺灣博碩士 、以作者查詢全國書目 、勘誤回報 、線上人數:55 、訪客IP:3.145.201.130
姓名 楊智名(Chih-Ming Yang) 查詢紙本館藏 畢業系所 電機工程學系 論文名稱 Q-頻帶接收機前端被動電路設計 相關論文 檔案 [Endnote RIS 格式]
[Bibtex 格式]
[相關文章]
[文章引用]
[完整記錄]
[館藏目錄]
[檢視]
[下載]
- 本電子論文使用權限為同意立即開放。
- 已達開放權限電子全文僅授權使用者為學術研究之目的,進行個人非營利性質之檢索、閱讀、列印。
- 請遵守中華民國著作權法之相關規定,切勿任意重製、散佈、改作、轉貼、播送,以免觸法。
摘要(中) 本論文著重在ALMA(Atacama Large Millimeter/Submillimeter Array) 第一頻帶(Band-1) 無線電波望遠鏡接收機前端之被動電路設計。接收機前端架構為由圓形號角天線(Horn Antenna) 再接至正交模態轉換器(OMT, Orthomode Transducer),經由OMT將接收到的電磁波訊號拆解成兩正交之訊號,交由後級低雜訊放大器先經過濾掉鏡像訊號之帶通濾波器,在接至解決LO-to-RF訊號之吸收式帶止濾波器,最後傳遞到混頻器將訊號降至中頻。
首先,延續過去的研究,帶通濾波器部分選用Trisection為主體架構,此架構能在低頻側提供一傳輸零點提高選擇度,且有電路面積較小的優點,實作在砷化鎵製程以提高系統整合度。
再者,選用耦合線架構之帶止濾波器,並引入適當電阻值,能夠有效吸收止帶內之反射訊號,以達到吸收式止帶效果,並實作在砷化鎵製程上。
最後,隨著台灣加工廠技術的進步,能夠提供更精細而準確的加工精度,在OMT的Double-Ridge Junction、90-degree Bend-plane、Power Combiner能夠使用更平滑曲線進行設計,在本論文中,提出一適當設計流程,設計出適用於Q-band之OMT,並在最終實作中選用鋁金屬為製作材料。
摘要(英) In this study, we focus on ALMA (Atacama Large Millimeter/Submillimeter Array) Band-1 receiver front-end passive circuit design. First block of receiver is circular horn antenna, the second block is the orthomode transducer which could split the radio signal into two orthogonal signal, third block is bandpass filter which could block the lower side mirror signal, the fourth block is absorptive bandstop filter which could solve LO-to-RF leakage signal problem, and the final block is mixer which could down convert RF signal to intermediate frequency.
First, carrying on the past studies, we select trisection as our bandpass filter main structure. This structure could provide a transmission zero to enhance selectivity in lower side and has advantage of small cell size. We could fabricate on GaAs process to improve system integration.
Second, we select couple line as main structure of bandstop filter and introduce proper resistance which could absorb the reflection signal in stopband effectively to achieve absorptive stopband. We fabricate this circuit in GaAs process.
Eventually, we could provide more refined and more accurate process than before with improvement of fabrication technique so that we could use smooth curve line to design our Double-Ridge Junction, 90-degree Bend-plane and Power Combiner of OMT. In this study, we provide a proper design process to design OMT application for Q-band and select metal Al as our fabrication material finally.
關鍵字(中) ★ Q頻帶
★ 帶通濾波器
★ 吸收式帶阻濾波器
★ 具吸收式止帶之帶通濾波器
★ 正交模態轉換器
★ 砷化鎵關鍵字(英) ★ Q-band
★ BPF
★ ABSF
★ OMT
★ GaAs論文目次 論文摘要 I
Abstract II
致謝 III
目錄 IV
圖目錄 VI
表目錄 IX
第一章 緒論 1
1-1 研究動機 1
1-2 文獻回顧 2
1-3 章節介紹 2
第二章 Q-BAND 帶通濾波器 3
2-1 電路架構 3
2-2 電路量測與模擬比較 5
2-2.1 帶通濾波器模擬與實作電路 5
2-2.2 量測與模擬結果比較 8
2-3 總結 12
第三章 Q-BAND 吸收式帶阻濾波器 13
3-1 吸收式帶阻濾波器設計原理與公式 13
3-2 三階吸收式帶阻濾波器設計與製作 15
3-3 結論 28
第四章 Q-BAND 正交模態轉換器 29
4-1 Double-Ridged Junction 30
4-2 90-Degree Bend-Plane 34
4-3 Power Combiner 36
4-4 量測與模擬比較 40
4-4.1 量測環境介紹 ( @ 300K & @80K ) 40
4-4.2 OMT實作 42
4-4.3 300K量測結果 44
4-4.4 300K與80K量測結果 46
4-5 結論 48
第五章 結論 49
參考文獻 50
Appendix A波導管中的波長計算 52
Appendix B AL 6061 特性介紹 53
Appendix C OMT最終設計尺寸 54
Appendix D 低溫形變模擬 55
參考文獻 [1] A.M. Bϕifot, E. Lier, “Simple and broadband orthomode transducer,” in IEE PROCEEDINGS, vol. 137, Pt. H, No. 6, December 1990
[2] A. Shin′ichiro, K. Mamoru, “Development of Double-Ridged Waveguide Orthomode Transducer for the 2 MM Band,” in Journal of Infrared, Millimeter, and Terahertz Waves, vol. 30, Issue 6 , pp 573-579 June 2009
[3] K. Mamoru, N. Masato, A. Shin′ichiro, S. Naohisa, W. Shan, and S. Yutaro, “Development of a Submillimeter Double-Ridged Waveguide Ortho-Mode Transducer (OMT) for the 385–500 GHz Band,” in Journal of Infrared, Millimeter, and Terahertz Waves, vol. 31, Issue 6, pp 697-707, June 2010
[4] A. Shin′ichiro, N. Taku, “Development of a Smooth Taper Double-Ridge Waveguide Orthomode Transducer for a New 100 GHz Band Z-Machine Receiver for the NRO 45-m Radio Telescope,” in Publications of the Astronomical Society of the Pacific, vol. 125, issue 924, pp.213-217, February 2013
[5] 謝育書, “K-Band及Q-Band毫米波帶通濾波器,” 碩士論文,國立中央大學, June 2008
[6] Y.-S. Lin, Y.-S. Hsieh, Y.-J. Hwang, & C.-C. Chiong, “Q-Band Band-pass Filter Designs in Heterodyne Receiver for Radio Astronomy,” IEEE Asia Pacific Conference on Circuits and System., pp.86-89.,December 2008
[7] Y.-S. Lin, Y.-S. Hsieh, Y.-J. Hwang, & C.-C. Chiong, “Q-Band GaAs Band-pass Filter Designs for ALMA Band-1,” IEEE Microw. Wireless Compon. Lett., vol. 19, NO. 6, June 2009.
[8] 邵致穎, “吸收式帶止濾波器研製,” 碩士論文, 國立中央大學, June 2014
[9] D. R. Jachowski, “Passive enhancement of resonator Q in microwave notch filters,” in IEEE MTT-S Int. Microw. Symp. Dig., pp. 1315-1318, 2004,
[10] A. C. Guyette, I. C. Hunter, R. D. Pollard, and D. R. Jachowski, “Perfectly-matched bandstop filters using lossy resonators,” in IEEE MTT-S Int. Microw. Symp. Dig., pp. 517–520, Jun. 2005
[11] J. Lee, T. C. Lee, and W. J. Chappell, “Lumped-element realization of absorptive band-stop filter with anomalously high spectral isolation,” IEEE Trans. Microw. Theory Tech., vol. 60, no. 8, August 2012.
[12] J. -Y. Shao, & Y. -S. Lin, “Millimeter-Wave Bandstop Filter with Absorptive Stopband,” Microwave Symposium (IMS), 2014 IEEE MTT-S International, pp.1-4, June 2014
[13] J. S. Hong and M. J. Lancaster, Microstrip Filters for RF/Micro-wave Applications. John Wiley & Sons, Inc., 2001.
[14] G. L. Matthaei, “Direct-coupled band-pass filters with λ0/4 resonators,” IRE International Convention Record, vol. 6, Part 1, pp. 98-111, Mar. 1958.
[15] G. L. Matthaei, L. Yong, E. M. T. Jones, Microwave Filters, Impedance-Matching Networks, and Coupling Structures, McGraw-Hill, Inc. 1980.
[16] WIN Semiconductor Corporation. http://www.winfoundry.com
[17] Waveguide Properties http://df2ck.de/tech/wg/
指導教授 林祐生(Yo-Shen Lin) 審核日期 2015-8-31 推文 plurk
funp
live
udn
HD
myshare
netvibes
friend
youpush
delicious
baidu
網路書籤 Google bookmarks
del.icio.us
hemidemi
myshare