參考文獻 |
Benson, S.A., Laumb, J.D., Crocker, C.R. and Pavlish, J.H. “SCR catalyst performance in flue gases derived from subbituminous and lignite coals”, Fuel Processing Technology 86, pp. 577-613, 2005.
Bonte, J.L., Fritsky, K.J., Plinke, M.A. and Wilken, M., “Catalytic destruction of PCDD/F in a fabric filter: Experienceata municipal waste incinerator in Belgium”, Waste Management, vol. 22, pp. 421-426, 2002.
Boyano, A., Lombardo, N., Gálvez, M.E., Lázaro, M.J. and Moliner, R., “Vanadium-loaded carbon-based monoliths for the on-board NO reduction: Experimental study of operating conditions”, Chemical Engineering Journal, vol.144, pp. 343-351, 2008.
Bullock, E. L., Patthey, L. and Steinemann, S. G., “Clean and hydroxylated rutile TiO2 (110) surfaces studied by X-ray photoelectron spectroscopy”, Surface science, vol. 352, pp. 504-510, 1996.
Byrne, H., Khan, K., Gross C., Mazyck, D., Naylor W., Harrison, W. and Altman R., “Performance of non-halogenated activated carbon for mercury compliance”, Power Plant Air Pollutant Control, pp. 28, 2012.
Chang, R. and Owens, D., “Developing mercury removal methods for power plants”, EPRI J., pp. 46-49, 1994.
Chen, L., Li, J. and Ge, M., “Promotional effect of Ce-doped V2O5-WO3/TiO2 with low vanadium loadings for selective catalytic reduction of NOx by NH3”, The Journal of Physical Chemistry C, vol. 113, pp. 21177-21184, 2009.
Chen, L., Liu, M., Fan, R., Ma, S., Xu, Z., Ren, M. and He, Q., “Mercury speciation and emission from municipal solid waste incinerators in the Pearl River Delta, South China”, Science of the Total Environment, vol. 447, pp. 396-402, 2013.
Chiu, C.H., Hsi, H.C. and Lin, H.P., “Multipollutant control of Hg/SO2/NO from coal-combustion flue gases using transition metal oxide-impregnated SCR catalysts”, Catalysis Today, vol. 245, pp. 2-9, 2015.
Crist, B. V., “Handbooks of monochromatic XPS spectra”, XPS International, 1999.
Eom, Y., Jeon, S.H., Ngo, T.A., Kim, J. and Lee, T.G., “Heterogeneous mercury reaction on a selective catalytic reduction (SCR) catalyst”, Catalysis Letters, vol. 121, pp. 219-225, 2008.
Eswaran, S. and Stenger, H.G., “Understanding mercury conversion in selective catalytic reduction (SCR) catalysts”, Energy & Fuels, vol. 19, pp. 2328-2334, 2005.
Furrer, J., Deuber, H., Hunsinger, H., Kreisz, S., Linek, A., Seifert, H., Stöhra, J., Ishikawa, R. and Watanabe, K., “Balance of NH3 and behavior of polychlorinated dioxins and furans in the course of the selective non-catalytic reduction of nitric oxide at the TAMARA waste incineration plant”, Waste Management, vol. 18, pp. 417-422, 1998.
Galbreath, K.C. and Zygarlick, C.J. “Mercury transformation in coal combustion flue gas”, Fuel Processing Technology, pp. 65-66, 289-310, 2000.
Gao, W., Liu, Q., Wu, C. Y., Li, H., Li, Y., Yang, J. and Wu, G., “Kinetics of mercury oxidation in the presence of hydrochloric acid and oxygen over a commercial SCR catalyst”, Chemical Engineering Journal, vol. 220, pp. 53-60, 2013.
Gochfeld, M., “Cases of mercury exposure, bioavailability and absorption”, Ecotoxicol Environ Safety, vol. 56, pp. 174-179, 2003.
Gretta, W., Morita, I. and Moffett, J., “Mercury oxidation across SCR catalyst at LG&E’s Trimble County unit 1”, In Power Plant Air Pollutant Control Mega Symposium, Baltimore, MD, 2006.
Hall, B., Lindqvist, O., Ljungstrom, E., “Mercury chemistry in simulated flue-gases related to waste incineration conditions”, Environmental Science & Technology, vol. 24, pp. 108-111, 1990.
He, S., Zhou, J., Zhu, Y., Luo, Z., Ni, M. and Cen, K., “Mercury oxidation over a vanadia-based selective catalytic reduction catalyst”, Energy & Fuels, vol. 23, pp. 253-259, 2008.
Hong, H.J., Ham, S.W., Kim, M.H., Lee, S.M. and Lee, J.B., “Characteristics of commercial selective catalytic reduction catalyst for the oxidation of gaseous elemental mercury with respect to reaction conditions”, Korean Journal of Chemical Engineering, vol. 27, pp. 1117-1122, 2010.
Hower, J.C., Robel T.L., Anderson C., Thomas, G.A., Clark C.L., “Characteristics of coal combustion products (CCP’s) from Kentucky power plants with emphasis on mercury content”, Fuel, 84, pp.1338-1350, 2005.
Hrdlicka, J.A., Seames, W.S., Mann, M.D., Muggli, D.S. and Horabik, C.A., “Mercury oxidation in flue gas using gold and palladium catalysts on fabric filters”, Environmental Science & Technology, vol. 42, pp. 6677-6682, 2008.
Hung, P.C., Chang, S.H., Lin, S.H., Buekens, A. and Chang, M.B., “Pilot tests on the catalytic filtration of dioxins”, Environmental Science & Technology, vol. 48, pp. 3995-4001, 2014.
Ichihara, K. and Tyree, C. “Pilot scale study of mercury removal in CT-121 wet FGD,” Air Quality VII, Arlington, VA, 2009.
Jones, J. and J. R. H. Ross, “The development of supported vanadia catalysts for the combined catalytic removal of the oxides of nitrogen and of chlorinated hydrocarbons from flue gases”, Catalysis Today, vol. 35, pp. 97-105, 1997.
Kamata, H., Ueno, S. I., Naito, T., and Yukimura, A., “Mercury oxidation over the V2O5(WO3)/TiO2 commercial SCR catalyst”, Industrial & Engineering Chemistry Research, vol. 47, pp. 8136-8141, 2008b.
Kamata, H., Ueno, S.I., Naito, T., Yamaguchi, A. and Ito, S., “Mercury oxidation by hydrochloric acid over a VOx/TiO2 catalyst”, Catalysis Communications, vol. 9, pp. 2441–2444, 2008a.
Kamata, H., Ueno, S.I., Sato, N. and Naito, T., “Mercury oxidation by hydrochloric acid over TiO2 supported metal oxide catalysts in coal combustion flue gas”, Fuel Processing Technology, vol. 90, pp. 947-951, 2009.
Kellie, S., Duan, Y., Cao, Y., Chu, P., Mehta, A., Carty, R., Liu, K., Pan, W. P. and Riley, J. T., “Mercury emissions from a 100 MW wall fired boiler as measured by Memicontinuous Mercury Monitor and Ontario Hydro Method”, Fuel Processing Technology, vol. 85, pp. 487-499, 2004.
Kelly, S., Pollak, F. H. and Tomkiewicz, M., “Raman spectroscopy as a morphological probe for TiO2 aerogels”, The Journal of Physical Chemistry B, vol. 101, pp. 2730-2734, 1997.
Kim, D.W., Kim, M.H., and Ham, S.W., “An on-line infrared spectroscopic system with a modified multipath White cell for direct measurements of N2O from NH3-SCR reaction”, Korean Journal of Chemical Engineering, vol.27, pp. 1730-1737, 2010.
Kotnik, J., Horvat M., Mandic, V., Martina, L., “Influence of the Sostanj coal-fired thermal plant on mercury and methyl mercury concentrations in Lake Velenje, Slovenia”, Science of the Total Environment, vol. 259, pp. 85-95, 2000.
Krivanek, C.S., “Mercury control technologies for MWC’s: the unanswered questions”, Journal of Hazardous Materials, vol. 47, pp. 119-136, 1996.
Lancia, A., Matsumara, D., Pepe, F., Volpicelli, G., “Adsorption of Mercuric Chloride Vapours from Incinerator Flue Gases on Calcium Hydroxide Particles”, Combustion Science and Technology, vol. 93, pp. 277-289, 1993.
Lange, N. A., “Handbook of Chemistry, McGraw–Hill”, New York, pp. 288-290, 1976.
Laudal, D.L., Brown, T.D. and Nott, B.R., “Effects of flue gas constituents on mercury speciation”, Fuel Processing Technology, pp. 65-66, pp. 157-165, 2000.
Lee, C.W., and Srivastava, R.K., “Pilot-scale study of the effect of selective catalytic reduction catalyst on mercury speciation in Illinois and powder river basin coal combustion flue gases”, Journal of the Air & Waste Management Association, vol. 56, pp. 643-649, 2006.
Lee, C.W., Serre, S. D., Zhao, Y., Lee, S.J., & Hastings, T.W., “Mercury oxidation promoted by a selective catalytic reduction catalyst under simulated powder river basin coal combustion conditions”, Journal of the Air & Waste Management Association, vol. 58, pp. 484-493, 2008.
Lee, S.J., Seo, Y.C., Jang, H.N., Park, K.S., Baek, J.I., An, H.S. and Song, K.C., “Speciation and mass distribution of mercury in a bituminous coal-fired power plant”, Atmospheric Environment, vol. 40, pp. 2215-2224, 2006.
Li, H., Wu, C. Y., Li, Y., Li, L., Zhao, Y. and Zhang, J., “Role of flue gas components in mercury oxidation over TiO2 supported MnOx-CeO2 mixed-oxide at low temperature”, Journal of Hazardous Materials, vol. 243, pp. 117-123, 2012.
Li, Y., Murphy, P. and Wu, C.Y., “Removal of elemental mercury from simulated coal-combustion flue gas using a SiO2–TiO2 nanocomposite”, Fuel Processing Technology, vol. 89, pp. 567-573, 2008.
Licate, A., Balles, E. and Schuttetnhelm, W., “Mercury control alternative for coal-fired power plants”, 10th Annual NAWTEC Conference, Orlando, USA, 2002.
Liljelind, P., Unsworth, J., Maaskant, O. and Marklund, S., “Removal of dioxins and related aromatic hydrocarbons from flue gas streams by adsorption and catalytic destruction”, Chemosphere, Vol. 42, pp. 615-623, 2001.
Lin, C.C., Yee, N. and Barkay, T., “Microbial transformations in the mercury cycle”, Environmental Chemistry and Toxicology of Mercury, pp. 155-191, 2012.
Lindbauer, R.L., Wurst, F. and Prey, T., “Combustion dioxin suppression in municipal solid waste incineration with sulfur additives”, Chemosphere, vol. 25, pp. 1409-1414, 1992.
Lutter, R. and Irwin, E., “Mercury in the environment: A volatile problem”, Environment: Science and Policy for Sustainable Development, vol.44, pp. 24-40, 2002.
Martin Y. M., Pedro A., Silvia S. and Jesús B., “Nitrous oxide formation in low temperature selective catalytic reduction of nitrogen oxides with V2O5/TiO2 catalysts”, Applied Catalysis B: Environmental, vol.70, pp. 330-334, 2007.
Miyamoto, A., Kobayashi, K., Inomata, M., and Murakami, Y., “Nitrogen-15 tracer investigation of the mechanism of the reaction of nitric oxide with ammonia on vanadium oxide catalysts”, The Journal of Physical Chemistry, vol.86, pp. 2945-2950, 1982.
Niksa, S. and Fujiwara, N., “A predictive mechanism for mercury oxidation on selective catalytic reduction catalysts under coal-derived flue gas”, Journal of the Air & Waste Management Association, vol. 55, pp. 1866-1875, 2005.
Niksa, S., Helble, J.J. and Fujiwara, N., “Kinetic modeling of homogeneous mercury oxidation: the importance of NO and H2O in predicting oxidation in coal-derived systems”, Environmental Science & Technology, pp. 35, pp. 3701-3706, 2001.
Nishitani, T., Fukunaga, I., Itoh, H. and Nomura, T., “The relationship between HCl and mercury speciation in flue gas from municipal solid waste incinerations”, Chemosphere, vol. 39, pp. 1-9, 1999.
Norton, G.A., Yang, H., Brown, R.C., Laudal, D.l., Dunham, G.E. and Erjavec, J. “Heterogeneous oxidation of mercury in simulated post combustion condition”, Fuel, vol. 82, pp. 107-116, 2003.
Park, K. S., Seo, Y.C., Lee, S. J. and Lee, J.H., “Emission and speciation of mercury from various combustion sources”, Powder Technology, vol. 180, pp. 151-156, 2008.
Pavlish, J.H., Sondreal, E.A., Mann, M.D., Olson, E.S., Galbreath, K.C., Laudal, D.L. and Benson, S.A., “Status review of mercury control options for coal fired power plants”, Fuel Processing Technology, vol. 82, pp. 89-165, 2003.
Pirrone, N., Cinnirella, S., Feng, X., Finkelman, R.B., Friedli, H.R., Leaner, J., Mason, R., Mukherjee, A.B., Stracher, G.B., Streets, D.G. and Telmer, K., “Global mercury emissions to the atmosphere from anthropogenic and natural sources”, Atmospheric Chemistry and Physics, vol. 10, pp. 5951-5964, 2010.
Pudasainee, D., Lee, S. J., Lee, S.H., Kim, J.H., Jang, H.N., Cho, S.J. and Seo, Y.C., “Effect of selective catalytic reactor on oxidation and enhanced removal of mercury in coal-fired power plants”, Fuel, vol. 89, pp. 804-809, 2010.
Rallo, M., Heidel, B., Brechtel, K. and Maroto-Valer, M.M., “Effect of SCR operation variables on mercury speciation”, Chemical Engineering Journal, vol. 198, pp. 87-94, 2012.
Schroeder, W.H. and Munthe, J., “Atmospheric mercury—An overview”, Atmospheric Environment, vol. 32, pp. 809-822, 1998.
Schuster, E., “The behavior of mercury in the soil with special emphasis on complexation and adsorption processes-a review of the literature”, Water, Air and Soil Pollution, vol.56, pp. 667-680, 1991.
Senior, C.L., “Oxidation of mercury across selective catalytic reduction catalysts in coal–fired power plants”, Journal of the Air & Waste Management Association, vol. 56, pp. 23-31, 2006.
Senior, C.L., Helbel, J.J. and Sarofim, A.F., “Emission of mercury, trace element, and fine particle from stationary combustion sources”, Fuel Processing Technology, vol. 65, pp. 263-288, 2000.
Senior, C.L., Morency, G.P., Huffman, G.P., Huggins, F.E., Shah, N., Peterson, T., Shadman, F. and Wu, B., “Interaction between vapor-phase mercury and coal fly ash under simulated utility power plant flue gas condition”, Air and Waste Management Association, 91st Annual Meeting and Exhibition, June.14-18, 98-RA79B.04, 1998.
Srivastava, R.K., “Control of Mercury Emissions from Coal Fired Electric Utility Boilers: An Update”, EPA/600/R-10/006; U.S. Environmental Protection Agency: Washington, DC, 2010.
Stolle, R., Koeser, H. and Gutberlet, H., “Oxidation and reduction of mercury by SCR De-NOx catalysts under flue gas conditions in coal fired power Plants”, Applied Catalysis B: Environmental, vol. 144, pp. 489-497, 2014.
Suarez Negreira, A. and Wilcox, J., “DFT study of Hg oxidation across vanadia-titania SCR catalyst under flue gas conditions”, The Journal of Physical Chemistry C, vol. 117, pp. 1761-1772, 2013a.
Suarez Negreira, A. and Wilcox, J., “Role of WO3 in the Hg oxidation across the V2O5–WO3–TiO2 SCR catalyst: A DFT study”, The Journal of Physical Chemistry C, vol. 117, pp. 24397-24406, 2013b.
Swain, E.B., “Mercury: source and environment fate”, Presentation at the Mercury Contamination Reduction Initiative Workshop, St. Paul, Minnesota, 1997.
Tirler, W., Mair, K., Donegà, M., Voto, G. and De Carli, A., “PCDD/F removal with catalytic filters in a municipal solid waste incineration”, Organohalogen Compounds, vol. 72, pp. 1561-1564, 2010.
U.S. EPA, “Mercury Information Collection Request (ICR) Part III”, 1999.
U.S. EPA, “Mercury study report to congress, volume Ⅱ:An inventory of anthropogenic mercury in the United States”, Office of Air Quality Planning and Standards, EPA-425R/97-004, 1997.
U.S. EPA, “Reducing Toxic Pollution from Power Plants,” pp. 6, March 16, 2011.
UNEP, “Global Mercury Assessment 2013: Sources, Emissions, Releases and Environmental Transport. UNEP Chemicals Branch”, Geneva, Switzerland, 2013.
UNEP, “Global Mercury Assessment”, Geneva, Switzerland, 2002.
UNEP, “Technical background report to the global atmospheric mercury assessment”, 2008.
Wang, Y., Duan, Y., Yang, L., Zhao, C., Shen, X., Zhang, M., Zhuo, Y. and Chen, C., “Experimental study on mercury transformation and removal in coal-fired boiler flue gases”, Fuel Processing Technology, vol. 90, pp. 643-651, 2009.
Weber, R., Sakurai, T. and Hagenmaier, H., “Low temperature decomposition of PCDD/PCDF, chlorobenzenes and PAHs by TiO2-based V2O5-WO3 catalysts”, Applied Catalysis B: Environmental, vol. 20, pp. 249-256, 1999.
Wu, B., Peterson, T.W., Shadman, F., Senior, C.L., Morency, J.R., Huggins, F.E. and Huffman, G.P., “Interactions between vapor-phase mercury and coal char under simulated utility power plant flues gas condition”, Fuel Processing Technology, vol. 63, pp. 93-108, 2000.
Yim, S.D., Koh, D.J. and Nam, I.S., “A pilot plant study for catalytic decomposition of PCDDs/PCDFs over supported chromium oxide catalysts”, Catalysis Today, vol. 75, pp. 269-276, 2002.
Yongxin, Z., Michael, D.M., Olson E.S., Pavlish, J.H. and Grant E. D. “Effect of sulfur dioxide and nitric oxide on mercury oxidation and reduction under homogeneous conditions”, Journal of Air and Waste Management Association, vol. 56, pp. 628-635, 2006.
Zhang, A., Zheng, W., Song, J., Hu, S., Liu, Z. and Xiang, J., “Cobalt manganese oxides modified titania catalysts for oxidation of elemental mercury at low flue gas temperature”, Chemical Engineering Journal, vol. 236, pp. 29-38, 2014.
Zhuang, Y., Laumb, J., Liggett, R., Holmes, M. and Pavlish, J., “Impacts of acid gases on mercury oxidation across SCR catalyst”, Fuel Processing Technology, vol. 88, pp. 929-934, 2007.
王柏智,「垃圾焚化及燃煤程序之重金屬排放特性研究」,國立中央大學環工所,碩士論文,2006。
行政院環境保護署,「固定污染源戴奧辛及重金屬排放調查及管制計畫」,中興工程,2013。
吳榮宗,「工業觸媒概論」,國興出版社,1989。
李淑莉,「台灣地區燃煤發電廠含汞物質流布與管理之研究」,國立臺北科技大學環境工程與管理研究所,碩士論文,2008。
周書瑋,「汽電共生設施重金屬污染物排放調查及管制策略研究」,國立臺北科技大學環境工程與管理研究所,碩士論文,2013。
林宣宏,「應用MnOx-CeO2/TiO2觸媒同時去除煙道氣中NO、汞及戴奧辛之研究」,國立中央大學環境工程所,碩士論文,2014。
侯丞、何啟功,「淺談汞對健康的危害」,高醫醫訊,第18卷,1999。
高雄市政府環境保護局,「日本先進垃圾焚化技術考察」,2010。
陳亭穆,「摻雜過渡金屬之觸媒在光催化及加氫脫硫反應促進效應之研究」,清華大學化學工程學系,學位論文,2010年。
楊文毅,「鈀觸媒氧化焚化廢氣中有機物之研究」,國立中興大學環工所,碩士論文,2000。
葉智偉,「以觸媒催化分解戴奧辛於實廠與小型模廠之研究」,國立中央大學環工所,碩士論文,2005。
|