參考文獻 |
1. Taranath, B.S. (1988), Structural Analysis & Design of Tall Building,McGraw-Hill, New York.
2. Krawinkler, H. (1978), “Shear in Beam-Column Joint in Seismic Design of Steel Frames”, Engineering Journal, AISC, Vol.15, No.3, pp.82-91.
3. Tsai, K.C. and Popov, E.P. (1990), “Seismic Panel Zone on Elastic Story Drift in Steel Moment Resistance Frames”, Journal of Structural Engineering-ASCE, Vol.116, No.12, pp. 3285-3301.
4. Bruneau, M., Uang C.M. and Whittaker A. (1998), Ductile Design of Steel Structures, McGraw-Hill Company, New York.
5. Civjan, S.A., Engelhardt, M.D. and Gross J.L. (2000),“Retrofit of Pre-Northridge Moment-Resisting Connections, Journal of Structural Engineering-ASCE, Vol. 126, Iss. 4, pp. 445-452.
6. Yu, Q. S., Uang, C. M., and Gross, J,(2000),“Seismic Rehabilitation Design of Steel Moment Connection with Welded Haunch”, Journal of Structural Engineering-ASCE, Vol. 126,Iss. 1, pp. 69-78.
7. Kim, T., Whittaker, A. S., Gilani, A. S. J., Bertero, V. V. and Takhirov, S. M. (2002), “Cover-Plate and Flange-Plate Steel Moment-Resisting Connections”, Journal of Structural Engineering-ASCE, Vol.128, Iss.4, pp.474-482.
8. Plumier, A., Baus, R., Pepin, R., and Schliech, J., (1992). “Anti Seismic Steel Structure Work”. U.S. Patent, No5148642.
9. Chen, S.J. and Tu, C.T.(2004), Experimental Study of Jumbo Size Reduced Beam Section Connections Using High-Strength Steel”, Journal of Structural Engineering-ASCE, Vol.130, iss.4, pp. 582-587.
10. Hasan, R., Kishi, N., and Chen, W.-F.(1998), “A new nonlinear connection classification system.” Journal of Constructional Steel Research, 47(1), 119-140.
11. Azizinamini, A. and Radziminski, J.B.(1989), “Static and cyclic performance of semirigid steel beam-to-column connections.” Journal of Structural Engineering, 115(12), 2979-2999.
12. Hsu, H.L. and Jean, S.Y.(2003), “Improving Seismic Design Efficiency of Petrochemical Facilities, Practice Periodical on Structural Design and Construction, Vol. 8, No. 2, pp. 107-117.
13. 周誌桓(2009),隅撐鋼結構耐震行能研究,國立中央大學土木工程學系,碩士論文。
14. 李宗儔(2010),具挫屈控制機制之隅撐構架耐震行為研究,國立中央大學土木工程學系,碩士論文。
15. 江承駿(2014),具摩擦消能機制之Y型隅撐鋼結構耐震性能研究,國立中央大學土木工程學系,碩士論文。
16. Moghaddam, H. A. and Estekanchi, H.(1995), “On the Characteristics of an Off-centre Bracing System”, Journal of Constructional Steel Research, Vol.35, pp.361-376.
17. Zamani, S. M. and Rasouli, M.(2006), “Experimental Investigation of Behavior of Y-Shaped Concentric Steel Bracing”, Asian Journal of Civil Engineering(Building and Housing), Vol.7, No.1, pp.81-94.
18. Saffari, H. and Yazdi, H. M.(2010), “An efficient and direct method for out-of-plane buckling analysis of Y-braced steel frames”, Journal of Constructional Steel Research, Vol.66, pp.1107-1111.
19. Zamani, S. M., Vafael, A., Desai, C. and Rasouli, M.(2012), “Experimental Investigation of Behavior of Steel Frames with Y-Shaped concentric bracing”, Journal of Constructional Steel Research, Vol.70, pp.12-27.
20. Pall, A. S. and Marsh, C.(1982), “Response of Friction Damped Braced Frames”, Journal of the Structural Division, Vol.108, No.6, pp.1313-1323.
21. Morgen, B. G. and Kurama, Y. C.(2004), “A Friction Damper for Post-Tensioned Precast Concrete Moment Frames”, PCI Journal, Vol.49, Iss.4, pp.112-133.
22. 鄭錦銅(2006),雙向預力含版R.C.梁柱接頭耐震性能研究(Ⅱ),國家地震工程研究中心,報告編號NCREE-06-023。
23. Wolski, M., Ricles, J. M. and Sause, R.(2009), “Experimental Study of a Self-Centering Beam-Column Connection with Flange Friction Device”, Journal of Structural Engineering, Vol. 135, No. 5, pp.479-488.
24. Grigorian, C. E., Yang, T. S. and Popov, E. P.(1993), “Slotted Bolted Connection Energy Dissipators”, Earthquake Spectra, Vol.9, No.3.
25. 盧煉元(2007),結構消能摩擦材料之摩擦性能測試,結構工程期刊,第22卷,第4期,第73-95頁。
26. Golondrino, J. C., MacRae, G. A., Chase, J. G., Rodgers, G. W. and Clifton, C. G.(2012), “Behaviour of Asymmetrical Friction Connections using different shim materials”, 2012NZSEE Conference, No.100.
27. 內政部營建署 (2006),鋼構造建築物鋼結構設計技術規範。
28. American Institute of steel Construction. Inc.(2005). Seismic Provisions for Steel Buildings, AISC 341-05, Chicago, IL.
29. 內政部營建署 (2011),建築物耐震設計規範及解說。
30. AISC, Manual of Steel Construction Allowable Stress Design, 9th Edition, American Institute of Steel Construction, Chicago Ill.
31. Chajes, A.(1974), Principles of structural stability theory,Prentice-Hall Englewood Cliffs, NJ.
32. 趙騰倫(2007),”ABAQUS 6.6在機械工程中的應用”,中國水利水電出版社,北京。.
33. 吳家慶(2005),”削切蓋板鋼骨梁柱接頭之耐震行為研究”,國家實驗研究院國家地震工程研究中心報告,報告編號NCREE-05-017。
34. 薛強、陳國慶、吳嘉偉、陳正忠、石豐銘、周文陽(2005),建築物耐震性能設計規範之研擬 – 子計畫一:規範與解說,內政部建築研究所。
35. Raggett, J, D., “Estimating Damping of Real Structure”Journal of the structure division, Setp., 1975 |