參考文獻 |
[1] Bardsley, N., Bland, S., Pattison, L., Pattison, M., Stober, K., Welsh, F., & Yamada, M. (2014). Solid-state lighting research and development multi-year program plan. US Department of Energy.
[2] Whang, A. J. W., Chen, Y. Y., & Teng, Y. T. (2009). Designing uniform illumination systems by surface-tailored lens and configurations of LED arrays. Journal of display technology, Vol. 5(3), pp. 94-103.
[3] Wang, K., Wu, D., Qin, Z., Chen, F., Luo, X., & Liu, S. (2011). New reversing design method for LED uniform illumination. Optics express, Vol. 19(104), pp. A830-A840.
[4] Moreno, I., Avendaño-Alejo, M., & Tzonchev, R. I. (2006). Designing light-emitting diode arrays for uniform near-field irradiance. Applied optics, Vol. 45(10), pp. 2265-2272.
[5] Hecht, E. (2002). Optics, 4th. International edition, Addison-Wesley, San Francisco, 3.
[6] Moreno, I., Sun, C. C., & Ivanov, R. (2009). Far-field condition for light-emitting diode arrays. Applied optics, Vol. 48(6), pp. 1190-1197.
[7] Sun, C. C., Chien, W. T., Moreno, I., Hsieh, C. C., & Lo, Y. C. (2009). Analysis of the far-field region of LEDs. Optics express, Vol. 17(16), pp. 13918-13927.
[8] Kim, B., Kim, H., & Kang, S. (2011). Reverse functional design of discontinuous refractive optics using an extended light source for flat illuminance distributions and high color uniformity. Optics express, Vol. 19(3), pp. 1794-1807.
[9] Situ, W., Han, Y., Li, H., & Luo, Y. (2011). Combined feedback method for designing a free-form optical system with complicated illumination patterns for an extended LED source. Optics express, Vol. 19(105), pp. A1022-A1030.
[10] Luo, Y., Feng, Z., Han, Y., & Li, H. (2010). Design of compact and smooth free-form optical system with uniform illuminance for LED source. Optics express, Vol. 18(9), pp. 9055-9063.
[11] 田登, 大. (2007). 色彩工程學: 理論與應用. 全華圖書股份有限公司.
[12] Smith, W. J. (1966). Modern optical engineering. Tata McGraw-Hill Education.
[13] Mahajan, V. N. (1998). OPTICAL IMAGING AND ABERRATIONS: PART I: RAY GEOMETRICAL OPTICS. Bellingham: SPIE-The International Society for Optical Engineering.
[14] Sun, C. C., Lee, T. X., Ma, S. H., Lee, Y. L., & Huang, S. M. (2006). Precise optical modeling for LED lighting verified by cross correlation in the midfield region. Optics letters, Vol. 31(14), pp. 2193-2195.
[15] Parent, A., Morin, M., & Lavigne, P. (1992). Propagation of super-Gaussian field distributions. Optical and quantum electronics, Vol. 24(9), pp. S1071-S1079.
[16] Gori, F. (1994). Flattened gaussian beams. Optics Communications, Vol. 107(5), pp. 335-341.
[17] Palma, C., & Bagini, V. (1994). Propagation of super-Gaussian beams. Optics communications, Vol. 111(1), pp. 6-10.
[18] Hoffnagle, J. A., & Jefferson, C. M. (2003). Beam shaping with a plano-aspheric lens pair. Optical Engineering, Vol. 42(11), pp. 3090-3099.
[19] Moreno, I., & Sun, C. C. (2008). Modeling the radiation pattern of LEDs. Optics express, Vol. 16(3), pp. 1808-1819.
[20] Cheng, Y. K., Lu, Y. H., Tien, C. H., & Shieh, H. P. (2009). Design and evaluation of light spread function for area-adaptive LCD system. Journal of display technology, Vol. 5(2), pp. 66-71.
[21] Svilainis, L., & Dumbrava, V. (2010). Numerical comparison of LED directivity approximation functions for video displays. Displays, Vol. 31(4), pp. 196-204.
[22] Han, Y. K., Song, W. J., Cho, B., Hong, H., & Oh, E. (2011, January). A backlight simulator for an edge-type backlight unit in local dimming systems. InConsumer Electronics (ICCE), 2011 IEEE International Conference on IEEE. pp. 655-656.
[23] Lindfield, G., & Penny, J. (2012). Numerical methods: using MATLAB. Academic Press.
[24] Vithal A. Patel. (1994). Numerical Analysis, Saunders College. pp. 315-316.
[25] Maron, M. J., & Lopez, R. J. (1982). Numerical analysis: a practical approach. New York: Macmillan. pp. 230-232.
[26] Montgomery, D. C., Jennings, C. L., & Kulahci, M. (2015). Introduction to time series analysis and forecasting. John Wiley & Sons. pp. 15-17.
[27] Wollhofen, R., Katzmann, J., Hrelescu, C., Jacak, J., & Klar, T. A. (2013). 120 nm resolution and 55 nm structure size in STED-lithography. Optics express, Vol. 21(9), pp. 10831-10840.
[28] Sparrow, C. M. (1916). On spectroscopic resolving power. The Astrophysical Journal, Vol. 44, pp. 76.
[29] Reynolds, G. O., Develis, J. B., Parrent, G. B., & Thompson, B. (1989). The new physical optics notebook: tutorials in Fourier optics (Vol. 61). New York: SPIE Optical Engineering Press. pp. 38–45.
[30] Zhang, X. B., Wang, R., Dong, D., Han, J. H., & Wu, H. X. (2012). Dynamic backlight adaptation based on the details of image for liquid crystal displays.Journal of Display Technology, Vol. 8(2), pp. 108-111.
[31] Burini, N., Nadernejad, E., Korhonen, J., Forchhammer, S., & Wu, X. (2013). Modeling power-constrained optimal backlight dimming for color displays.Journal of Display Technology, Vol. 9(8), pp. 656-665.
[32] Wu, R., Zheng, Z., Li, H., & Liu, X. (2012). Optimization design of irradiance array for LED uniform rectangular illumination. Applied optics, Vol. 51(13), pp. 2257-2263.
[33] Zhu, Z. M., Liu, H., & Chen, S. M. (2015). The design of diffuse reflective free-form surface for indirect illumination with high efficiency and uniformity. IEEE Photonics Journal, Vol. 7(3), pp. 1-10.
[34] Zheng, J., & Qian, K. (2013). Designing single LED illumination distribution for direct-type backlight. Applied optics, Vol. 52(28), pp. 7022-7027.
[35] OSRAM webside : https://moderndevice.com/wp-content/uploads/2011/08/Luxeon-I.pdf
[36] Chen, C. F., Wu, C. C., & Wu, J. H. (2010). Modified wide radiating lenses of the power-chip light emitting diodes for a direct-lit backlight. Optik-International Journal for Light and Electron Optics, Vol. 121(9), pp. 847-852.
[37] Cho, D., Oh, W. S., & Moon, G. W. (2011). A novel adaptive dimming LED backlight system with current compensated XY channel drivers for LCD TVs.Journal of Display Technology, Vol. 7(1), pp. 29-35.
[38] OSRAM webside : http://www.osram-os.com/osram_os/en/products/product-catalog/led-light-emitting-diodes/platinum-dragon/lcw-w5sn/index.jsp
[39] Chang, R. S., Tsai, J. Z., Li, T. Y., & Liao, H. L. (2012). LED backlight module by lightguide-diffusive component. Journal of Display Technology, Vol. 8(2), pp. 79-86.
[40] Martin, J. W., Nguyen, T., Byrd, E., Dickens, B., & Embree, N. (2002). Relating laboratory and outdoor exposures of acrylic melamine coatings: I. Cumulative damage model and laboratory exposure apparatus. Polymer degradation and stability, Vol. 75(1), pp. 193-210.
[41] Lin, B. J. (1975). Deep UV lithography. Journal of Vacuum Science & Technology, Vol. 12(6), pp. 1317-1320.
[42] Kim, J. J. K., Paik, S. J., Herrault, F., & Allen, M. G. (2012). UV-LED lithography for 3-D high aspect ratio microstructure patterning. In 14th Solid State Sensors, Actuators, and Microsystems Workshop. pp. 481-484.
[43] Ushio America, Inc. webside : http://www.ushio.com.tw/documents/products/lamp/ushio_discharge_lamps.pdf
[44] Saraf, S., Balakrishnan, K., Buchman, S., Byer, R., Faied, D., Hanson, J, & Soulage, M. (2014, November). UV LED charge control of an electrically isolated proof mass in a Gravitational Reference Sensor configuration at 255nm. In Latin America Optics and Photonics Conference. Optical Society of America. LM2A-4.
[45] Bowker, C., Sain, A., Shatalov, M., & Ducoste, J. (2011). Microbial UV fluence-response assessment using a novel UV-LED collimated beam system. Water research, Vol. 45(5).
[46] Li, Y., Wu, P., Luo, Z., Ren, Y., Liao, M., Feng, L., ... & He, L. (2015). Rapid fabrication of microfluidic chips based on the simplest LED lithography. Journal of Micromechanics and Microengineering, Vol. 25(5), pp. 055020.
[47] Chen, J. J., & Lin, C. T. (2010). Freeform surface design for a light-emitting diode–based collimating lens. Optical Engineering, Vol. 49(9), pp. 093001-093001.
[48] Wang, G., Wang, L., Li, F., & Zhang, G. (2012). Collimating lens for light-emitting-diode light source based on non-imaging optics. Applied optics, Vol. 51(11), pp. 1654-1659.
[49] Chen, J. J., Wang, T. Y., Huang, K. L., Liu, T. S., Tsai, M. D., & Lin, C. T. (2012). Freeform lens design for LED collimating illumination. Optics express, Vol. 20(10), pp. 10984-10995.
[50] NICHIA corporation wabside : https://www.nichia.co.jp/specification/products/led/NCSU276A-E.pdf
[51] Dow Corning Corporation wabside : http://www.dowcorning.com/applications/search/default.aspx?R=11534EN
[52] Hass, G., & Waylonis, J. E. (1961). Optical constants and reflectance and transmittance of evaporated aluminum in the visible and ultraviolet. JOSA, Vol. 51(7), pp. 719-722.
[53] Bennett, H. E., Silver, M., & Ashley, E. J. (1963). Infrared reflectance of aluminum evaporated in ultra-high vacuum. JOSA, Vol. 53(9), pp. 1089-1095. |