參考文獻 |
[1.] Rubio-Gonzalez, C., Felix-Martinez, C., Gomez-Rosas, G., Ocana, J. L., Morales, M., & Porro, J. A. (2011). Effect of laser shock processing on fatigue crack growth of duplex stainless steel. Materials Science and Engineering: A, 528(3), 914-919.
[2.] Guo, Y. B., & Caslaru, R. (2011). Fabrication and characterization of micro dent arrays produced by laser shock peening on titanium Ti–6Al–4V surfaces. Journal of Materials Processing Technology, 211(4), 729-736.
[3.] Lim, H., Kim, P., Jeong, H., & Jeong, S. (2012). Enhancement of abrasion and corrosion resistance of duplex stainless steel by laser shock peening. Journal of Materials Processing Technology, 212(6), 1347-1354.
[4.] Fan, Y. J., Zhou, J. Z., Huang, S., Wang, W., Wei, D. H., Fan, J. R., & Gao, B. (2013). Study on 2-D shock wave pressure model in micro scale laser shock peening. Rev. Adv. Mater. Sci, 33, 111-118.
[5.] Shukla, P. P., Swanson, P. T., & Page, C. J. (2014). Laser shock peening and mechanical shot peening processes applicable for the surface treatment of technical grade ceramics: A review. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 228(5), 639-652.
[6.] Cao, Y., Xie, X., Antonaglia, J., Winiarski, B., Wang, G., Shin, Y. C., ... & Liaw, P. K. (2015). Laser shock peening on Zr-based bulk metallic glass and its effect on plasticity: experiment and modeling. Scientific reports, 5, 10789.
[7.] Ebrahimi, M., Amini, S., & Mahdavi, S. M. (2016). The investigation of laser shock peening effects on corrosion and hardness properties of ANSI 316L stainless steel. The International Journal of Advanced Manufacturing Technology, 1-9.
[8.] Park, H. K., Kim, D., Grigoropoulos, C. P., & Tam, A. C. (1996). Pressure generation and measurement in the rapid vaporization of water on a pulsed?laser?heated surface. Journal of applied Physics, 80(7), 4072-4081.
[9.] Braisted, W., & Brockman, R. (1999). Finite element simulation of laser shock peening. International Journal of Fatigue, 21(7), 719-724.
[10.] Sano, Y., Akita, K., Masaki, K., Ochi, Y., Altenberger, I., & Scholtes, B. (2006). Laser peening without coating as a surface enhancement technology. Pulse, 100(40), 250mJ.
[11.] Vukelic, S., Wang, Y., Kysar, J. W., & Yao, Y. L. (2009). Dynamic material response of aluminum single crystal under microscale laser shock peening. Journal of Manufacturing Science and Engineering, 131(3), 031015.
[12.] Jae-Ho, L. E. E., Jeong-Hwan, J. A. N. G., Byeong-Don, J. O. O., Young-Myung, S. O. N., & Young-Hoon, M. O. O. N. (2009). Laser surface hardening of AISI H13 tool steel. Transactions of Nonferrous Metals Society of China, 19(4), 917-920.
[13.] Zhang, X. C., Zhang, Y. K., Lu, J. Z., Xuan, F. Z., Wang, Z. D., & Tu, S. T. (2010). Improvement of fatigue life of Ti–6Al–4V alloy by laser shock peening. Materials Science and Engineering: A, 527(15), 3411-3415.
[14.] Doukas, A. G., Zweig, A. D., Frisoli, J. K., Birngruber, R., & Deutsch, T. F. (1991). Non-invasive determination of shock wave pressure generated by optical breakdown. Applied Physics B, 53(4), 237-245.
[15.] Berthe, L., Fabbro, R., Peyre, P., Tollier, L., & Bartnicki, E. (1997). Shock waves from a water-confined laser-generated plasma. Journal of Applied Physics, 82(6), 2826-2832.
[16.] Zhu, S., Lu, Y. F., Hong, M. H., & Chen, X. Y. (2001). Laser ablation of solid substrates in water and ambient air. Journal of Applied Physics, 89(4), 2400-2403.
[17.] Kruusing, A. (2004). Underwater and water-assisted laser processing: part 1—general features, steam cleaning and shock processing. Optics and Lasers in Engineering, 41(2), 307-327.
[18.] Yavas, O., Schilling, A., Bischof, J., Boneberg, J., & Leiderer, P. (1997). Bubble nucleation and pressure generation during laser cleaning of surfaces. Applied Physics A: Materials Science & Processing, 64(4), 331-339.
[19.] Nath, A., & Khare, A. (2011). Transient evolution of multiple bubbles in laser induced breakdown in water. Laser and Particle Beams, 29(01), 1-9.
[20.] Hutchins, D. A. (1988). Ultrasonic generation by pulsed lasers. Physical Acoustics, 18, 21-123.
[21.] Fujimoto, J. G., Lin, W. Z., Ippen, E. P., Puliafito, C. A., & Steinert, R. F. (1985). Time-resolved studies of Nd: YAG laser-induced breakdown. Plasma formation, acoustic wave generation, and cavitation. Investigative ophthalmology & visual science, 26(12), 1771-1777
[22.] Hickling, R., & Plesset, M. S. (1964). Collapse and rebound of a spherical bubble in water. Physics of Fluids (1958-1988), 7(1), 7-14.
[23.] Yang, J. M., Her, Y. C., Han, N., & Clauer, A. (2001). Laser shock peening on fatigue behavior of 2024-T3 Al alloy with fastener holes and stopholes. Materials Science and Engineering: A, 298(1), 296-299.
[24.] Rubio-Gonzalez, C., Ocana, J. L., Gomez-Rosas, G., Molpeceres, C., Paredes, M., Banderas, A., ... & Morales, M. (2004). Effect of laser shock processing on fatigue crack growth and fracture toughness of 6061-T6 aluminum alloy. Materials Science and Engineering: A, 386(1), 291-295.
[25.] Rubio-Gonzalez, C., Felix-Martinez, C., Gomez-Rosas, G., Ocana, J. L., Morales, M., & Porro, J. A. (2011). Effect of laser shock processing on fatigue crack growth of duplex stainless steel. Materials Science and Engineering: A, 528(3), 914-919.
[26.] Ruiz, A., Ortiz, N., Carreon, H., & Rubio, C. (2009). Utilization of ultrasonic measurements for determining the variations in microstructure of thermally degraded 2205 duplex stainless steel. Journal of Nondestructive Evaluation, 28(3-4), 131-139.
[27.] Zhang, Y. K., Hu, C. L., Cai, L., Yang, J. C., & Zhang, X. R. (2001). Mechanism of improvement on fatigue life of metal by laser-excited shock waves. Applied Physics A, 72(1), 113-116.
[28.] Ding, K., & Ye, L. (2006). Laser shock peening: performance and process simulation. Woodhead Publishing.
[29.] Dorman, M., Toparli, M. B., Smyth, N., Cini, A., Fitzpatrick, M. E., & Irving, P. E. (2012). Effect of laser shock peening on residual stress and fatigue life of clad 2024 aluminium sheet containing scribe defects. Materials Science and Engineering: A, 548, 142-151.
[30.] Zhang, L., Zhang, Y. K., Lu, J. Z., Dai, F. Z., Feng, A. X., Luo, K. Y., ... & Qi, H. (2013). Effects of laser shock processing on electrochemical corrosion resistance of ANSI 304 stainless steel weldments after cavitation erosion. Corrosion Science, 66, 5-13.
[31.] Yang, J. M., Her, Y. C., Han, N., & Clauer, A. (2001). Laser shock peening on fatigue behavior of 2024-T3 Al alloy with fastener holes and stopholes. Materials Science and Engineering: A, 298(1), 296-299.
[32.] Rubio-Gonzalez, C., Gomez-Rosas, G., Ocana, J. L., Molpeceres, C., Banderas, A., Porro, J., & Morales, M. (2006). Effect of an absorbent overlay on the residual stress field induced by laser shock processing on aluminum samples. Applied Surface Science, 252(18), 6201-6205.
[33.] Sanchez-Santana, U., Rubio-Gonzalez, C., Gomez-Rosas, G., Ocana, J. L., Molpeceres, C., Porro, J., & Morales, M. (2006). Wear and friction of 6061-T6 aluminum alloy treated by laser shock processing. Wear, 260(7), 847-854.
[34.] Real, E., Rodriguez, C., Belzunce, F. J., Sanjurjo, P., Canteli, A. F., & Pariente, I. F. (2009). Fatigue behaviour of duplex stainless steel reinforcing bars subjected to shot peening. Fatigue & Fracture of Engineering Materials & Structures, 32(7), 567-572.
[35.] Sano, Y., Kimura, M., Mukai, N., Yoda, M., Obata, M., & Ogisu, T. (2000, February). Process and application of shock compression by nanosecond pulses of frequency-doubled Nd: YAG laser. In Advanced High-Power Lasers and Applications (pp. 294-306). International Society for Optics and Photonics.
[36.] Fabbro, R., Peyre, P., Berthe, L., & Scherpereel, X. (1998). Physics and applications of laser-shock processing. Journal of laser applications, 10(6), 265-279.
[37.] Fabbro, R., Fournier, J., Ballard, P., Devaux, D., & Virmont, J. (1990). Physical study of laser?produced plasma in confined geometry. Journal of applied physics, 68(2), 775-784.
[38.] Hammersley, G., Hackel, L. A., & Harris, F. (2000). Surface prestressing to improve fatigue strength of components by laser shot peening. Optics and Lasers in Engineering, 34(4), 327-337.
[39.] Peyre, P., Fabbro, R., Merrien, P., & Lieurade, H. P. (1996). Laser shock processing of aluminium alloys. Application to high cycle fatigue behaviour. Materials Science and Engineering: A, 210(1), 102-113.
[40.] Fox, J. A. (1974). Effect of water and paint coatings on laser?irradiated targets. Applied Physics Letters, 24(10), 461-464.
[41.] Gujba, A. K., & Medraj, M. (2014). Laser peening process and its impact on materials properties in comparison with shot peening and ultrasonic impact peening. Materials, 7(12), 7925-7974.
[42.] Fairand, B. P., & Clauer, A. H. (1979). Laser generation of high?amplitude stress waves in materials. Journal of Applied Physics, 50(3), 1497-1502.
[43.] Kruusing, A. (2010). Handbook of liquids-assisted laser processing. Elsevier.
[44.] US data for solids [http://traktoria.org/files/sonar/passive_materials/acoustic_impedace_of_some_solids.htm]
[45.] Clauer, A. H., Walters, C. T., & Lahrman, D. F. (2003). U.S. Patent No. 6,539,773. Washington, DC: U.S. Patent and Trademark Office.
[46.] Chou, P. C., & Hopkins, A. K. (1972). Dynamic response of materials to intense impulsive loading.
[47.] Tenaglia, R. D., & Lahrman, D. F. (2009). Surface treatment: Shock tactics. Nature Photonics, 3(5), 267-270.
|