高強度鋼筋混凝土連接梁反覆載重行為之研究

以作者查詢圖書館館藏

、以作者查詢臺灣博碩士

、以作者查詢全國書目

、勘誤回報

、線上人數：28

、訪客IP：3.138.118.194

姓名

陳思齊(Chen Ssu Chi) 查詢紙本館藏

畢業系所

土木工程學系

論文名稱

高強度鋼筋混凝土連接梁反覆載重行為之研究
(Study on Cyclic Behavior of High Strength Reinforced Concrete Coupling Beams)

相關論文

★ 耦合結構牆地震行為與性能化設計法	★ 各種載重作用下neo-Hookean材料微孔動態分析
★ 劉氏保群算法於高雷諾數Burgers方程之應用及探討	★ 彈性材料圓孔非對稱變形近似解研究
★ HAF描述含圓孔橡膠材料三軸壓縮變形的誤差分析	★ 國立中央大學-HAF描述圓形微孔非對稱變形的誤差計算
★ 形狀記憶合金於抗震RC耦合牆系統之初步研究	★ 多微孔橡膠材料受拉變形平面應力分析
★ 非線性彈性固體微孔變形特性	★ 綠色高韌性纖維混凝土(Green-ECC)本土化發展與自癒合能力之研究
★ 鋼絲網加勁高韌性纖維水泥基複合材料之力學行為研究	★ 鋼絲網加勁高韌性纖維混凝土於RC梁構件剪力補強研究
★ 高韌性纖維混凝土(ECC)之材料配比及添加物對收縮及力學性質影響	★ 材料組成比例對超高性能纖維混凝土之工作性與力學性質之影響
★ 耦合結構牆受近斷層地震作用之行為	★ 高爐石高韌性纖維混凝土（ECC）之開發與自癒合研究

檔案

[Endnote RIS 格式]

[Bibtex 格式]

[相關文章]

[文章引用]

[完整記錄]

[館藏目錄]

[檢視]

[下載]

本電子論文使用權限為同意立即開放。
已達開放權限電子全文僅授權使用者為學術研究之目的，進行個人非營利性質之檢索、閱讀、列印。
請遵守中華民國著作權法之相關規定，切勿任意重製、散佈、改作、轉貼、播送，以免觸法。

摘要(中)

韌性式剪力連接梁系統能有效增加結構物於水平向之承載能力，使其在側向更具韌性，故常使用於中高樓層之建築做為核心抗側力系統。相較於傳統剪力牆系統，韌性式剪力連接梁系統更可以滿足空間使用上之需求。韌性式剪力連接梁系統之韌性行為須建立在連接梁之變形能力上，而過去的研究顯示，若要使剪力連接梁具備良好的位移能力，則須在構件發生大位移時，仍能提供足夠之抗剪強度以維持其剪力強度，將試體之破壞型式由較為安全的撓曲破壞所控制。因此本研究主要經由實驗與分析方式，來探討在高剪力強度的情況下，以改變試體之圍束行為，以及連接梁強度與混凝土強度比值，檢驗與觀察其對於試體之剪力強度與位移能力會有何種影響。
本實驗共設計四座跨深比為2之連接梁試體，經由雙曲率與零軸壓之狀態下進行反覆載重試驗，以混凝土強度、鋼筋之圍束形式與添加鋼纖維與否做為設計參數，探討新型高強度材料應用於連接梁之情形，並針對美國規範ACI318-14對於連接梁之標稱剪力強度進行探討與檢核。從實驗結果中顯示，剪力強度與混凝土強度比值過高，可能導致混凝土發生過早之破壞。圍束行為的不同將會影響試體之破壞行為。於剪力連接梁中添加鋼纖維，能有效改善試體之強度與位移行為。

摘要(英)

Ductile coupled shear walls, an efficient lateral-force-resisting system, which used as the primary lateral force resisting system for high-rise buildings. It different from the traditional shear wall system, this coupled wall system satisfies better the demand of space requirement. The ductility of coupled shear wall requires good deformation capacity of the coupling beams. According to previous researches, adequate shear strength is indispensable for the development of the ductility of coupling beams. To make sure the coupling beams distorted by flexural mode,it is important to matain the coupling beams strength on large deformation. Therefore this research focuses on the effects of shear strength and deformation capacity of coupling beams with the variation of the design of confinemet, and the ratio of shear strength to concrete strength.
Four full-scale specimens were tested to study the effects of behavior of coupling beams under different property of material (concrete strength), design of conefinement,add steel fiber . This research discusses the application of the new high-strength materials to the coupling beams, and checks the the nominal shear strength of the coupling beams according to ACI318-14. Test results indicate that, when the shear strength and concrete strength ratio is too high, may lead to premature destruction of concrete. Confinment behavior will affect the destruction of the specimen. The addition of steel fiber to the coupling beams can effectively improve the strength and displacement behavior of the specimen.

關鍵字(中)

★ 高強度鋼筋混凝土
★ 韌性式剪力連接梁系統
★ 圍束鋼筋設計
★ 剪力強度
★ 位移能力
★ 鋼纖維

關鍵字(英)

★ high-strength reinforced concrete
★ ductile coupled shear walls
★ the design of conefinement
★ shear strength
★ ductile
★ steel fiber

論文目次

緒論 i
Abstract ii
目錄 iii
表目錄 v
圖目錄 vi
一、緒論 1
1-1 研究動機與目的 1
1-2 研究內容與方法 4
二、文獻回顧 6
2-1 美國規範ACI 318-14於連接梁之規定 6
2-2 剪力牆連接梁之相關研究測試研究與結果 9
2-2-1 國外鋼筋混凝土剪力牆連接梁之相關實驗與研究 9
2-2-2 纖維混凝土剪力牆連接梁之相關實驗與研究 16
2-2-3 國內鋼筋混凝土剪力牆連接梁之相關實驗與研究 22
2-3 軟化壓拉桿模型 41
三、試驗規劃 52
3-1 前言 52
3-2 試體設計 53
3-3 試體製作 65
3-3-1 基礎施作 66
3-3-2 梁體施作 68
3-3-3 試體澆置 73
3-4 測試布置 76
3-5-1 內部量測系統 85
3-5-2 外部量測系統 87
四、試驗觀察與結果 96
4-1 前言 96
4-2 材料試驗 96
4-3 試體載重與位移行為曲線 101
4-4 應變計量測 132
4-5 裂縫發展與破壞模式 159
五、分析與討論 183
5-1 前言 183
5-2 撓曲與剪力強度之分析與破壞模式之預測 192
5-2-1 撓曲強度 192
5-2-2 剪力強度 194
5-2-3 破壞模式預測 197
5-3 高強度混凝土之貢獻 202
5-4 圍束型式之比較 206
5-5 添加鋼纖維之影響 209
5-6 相似試體之行為比較 214
六、結論與建議 218
6-1 前言 218
6-1-1 圍束效果對於連接梁試體之影響 218
6-1-2 箍筋間距對連接梁試體之影響 220
6-1-3 混凝土強度對連接梁試體之重要性 221
6-1-4 於配置完整對角鋼筋籠添加鋼纖維之影響 222
6-1-5 對於ACI318-14於連接梁剪力容量上限之建議 222
6-2 未來研究與展望 224
參考文獻 225
附錄A本試驗ACI318-14規範之設計計算 232
附錄B試體CB40B剪力強度計算 234
附錄C本實驗蒐集之試體樣本 237

參考文獻

Fintel, M., “Shear Walls – An Answer for Seismic Resistance?” Concrete International, American Concrete Institute, 1991, pp. 48-53.
Lequesne, R. D., ”Behavior and Design of High-Performance Fiber-Reinforced Concrete Coupling Beams and Coupled-Wall Systems,” Doctoral Dissertation, University of Michigan Ann., Michugan, 2011, 1 pp
洪崇展, 盧威廷, 鄭宇翔. 耦合結構牆性能化抗震設計法. 結構工程. 32(1), pp. 49- 70, 2017
C.-C. Hung, H. Li, H.-C. Chen. High-strength Steel Reinforced Squat UHPFRC Shear Walls: Cyclic Behavior and Design Implications. Engineering Structures. 141, pp.59-74, 2017.
C.-C. Hung, W.-T. Lu. A Performance-Based Design Method for Coupled Wall Structures. Journal of Earthquake Engineering. 21(4), pp.579-603, 2017.
C.-C. Hung, W.-T. Lu. Tall hybrid coupled structural walls: seismic behavior and design suggestions. International Journal of Civil Engineering. 2017.
C.-C. Hung, W.-T. Lu. Towards achieving the desired seismic performance for hybrid coupled structural walls. Earthquakes and Structures. 9(6), pp.1251-1272, Nov, 2015
洪崇展, 盧威廷. 複合耦合結構牆抗震系統之設計與非線性側推分析. 結構工程. 29(3), pp. 40- 58, 2014
C.-C. Hung. Modified Full Operator Hybrid Simulation Algorithm and its Application to the Seismic Response Simulation of a Composite Coupled Wall System. Journal of Earthquake Engineering. 16(6), pp.759-776, 2012
ACI Committee 318, Building Code Requirements for Structural Concrete (ACI 318-14) and Commentary (ACI 318R-14), AmericanConcrete Institute, Farmington Hills, 2014.
Wallace, J. W.,“Modeling Issue for Tall Reinforced Concrete Core Wall Buildings”, Structural Design of Tall and Special Buildings, Vol. 16, No. 5, 2007 pp. 615-632.
Naaman, A.E.,“High-Performance Fiber-Reinforced Cement Composites”, Concrete Structures for the Future, IABSE Symposium, Zurich, pp.371-376, 1987.
C.-C. Hung, Y.-F. Su, Y.-M. Su. Mechanical properties and self-healing evaluation of strain-hardening cementitious composites with high volumes of hybrid pozzolan materials. Composites Part B: Engineering, 2017.
洪崇展, 戴艾珍, 顏誠皜, 溫國威, 張庭維. 新世代多功能性混凝土材料－高性能纖維混凝土. 土木水利. 44(1), pp. 33-51, 2017
C.-C. Hung, Y.-F. Su, H.-H. Hung. Impact of natural weathering on medium-term self-healing performance of fiber reinforced cementitious composites with intrinsic crack-width control capability. Cement and Concrete Composites 80, pp.200-209, 2017.
C.-C. Hung, C.-Y. Chueh. Cyclic Behavior of UHPFRC Flexural Members Reinforced with High-Strength Steel Rebar. Engineering Structures. 122, pp.108-120, 2016.
C.-C. Hung, Y.-F. Su. Medium-term self-healing evaluation of Engineered Cementitious Composites with varying amounts of fly ash and exposure durations. Construction & Building Materials. 118, pp. 194-203, 2016.
C.-C. Hung, Y.-S. Chen. Innovative ECC Jacketing for Retrofitting Shear-Deficient RC Members. Construction & Building Materials. 111, pp. 408-418, 2016.
C.-C. Hung, W.-M. Yen, K.-H. Yu. Vulnerability and Improvement of Reinforced ECC Flexural Members under Displacement Reversals: Experimental Investigation and Computational Analysis. Construction & Building Materials. 107, pp.287-298, March, 2016.
C.-C. Hung, W.-M. Yen. Experimental evaluation of ductile fiber reinforced cement-based composite beams incorporating shape memory alloy bars. Procedia Engineering. 79, pp.506-512, 2014
C.-C. Hung, Y.-F. Su. On Modeling Coupling Beams Incorporating Strain-hardening Cement-based Composites. Computers and Concrete. 12(4), pp. 243-259, 2013
C.-C. Hung, Y.-F. Su, K.-H. Yu. Modeling the Shear Hysteretic Response for High Performance Fiber Reinforced Cementitious Composites. Construction and Building Materials. 41, pp.37-48, 2013
C.-C. Hung, S.-H. Li. Three-dimensional Model for Analysis of High Performance Fiber Reinforced Cement-based Composites. Composites Part B: Engineering. 45, pp.1441-1447, 2013
洪崇展, 曾柏庭, 游文吉, 黃忠良. 使用高性能纖維混凝土於耦合結構牆以提升地震行為表現之有效性. 結構工程. 26(4), pp. 3-16, 2011
C.-C. Hung, S. El-Tawil. Seismic Behavior of a Coupled Wall System with HPFRC Materials in Critical Regions. ASCE Journal of Structural Engineering ASCE. 137(12), pp.1499-1507, 2011
C.-C. Hung, S. El-Tawil. Hybrid Rotating/Fixed-Crack Model for High Performance Fiber Reinforced Cementitious Composites. ACI Materials Journal. 107(6), pp.569-577, 2010
Barney, G. B.; Shiu, K. N.; Rabbat,B.G.;Fiorato,A.E.;Russell, H. G.; and Corley, W. G., Behavior of Coupling Beamsunder Load Reversals (RD068.01B), Portland Cement Association,Skokie, IL, 1980.
Paulay, T., and Binney, J.,“Diagonally Reinforced Coupling Beams of Shear Walls”, Shear in Reinforced Concrete, SP-42, V. 2, American Concrete Institute, Farmington Hills, Mich.1974, pp. 579-598.
ACI Committee 318, Building Code Requirements for Structural Concrete (ACI 318-99) and Commentary (ACI 318R-99), American Concrete Institute, Farmington Hills, 1999.
Moehle, J. P., Ghodsi, T., Hooper, J. D., Fields, D. S., Gedhada, R., (2001). “Seismic Design of Cast-in-place Concrete Special Structural Walls and Coupling Beams: a Guide for Practicing Engineers, ” NEHRP Seismic Design Technical Brief No. 6, produced by the NEHRP Consultants Joint Venture, a partnership of the Applied Technology Council and the Consortium of Universities for Research in Earthquake Engineering, for the National Institute of Standards and Technology, Gaithersburg, MD, NIST GCR 11-917-11REV-1.
Harries, K. A., Fortney, P. J., Shahrooz, B. M., and Brienen, B. J., “Parctical Design of Diagonally Reinforced Concrete Coupling Beams-Critical Review of ACI 318 Requirements,” ACI Structural Journal, Vol.102, No.6, November-December 2005.
ACI Committee 318, Building Code Requirements for Structural Concrete (ACI 318-05) and Commentary (ACI 318R-05), American Concrete Institute, Farmington Hills, 2005.
ACI Committee 318, Building Code Requirements for Structural Concrete (ACI 318-08) and Commentary (ACI 318R-08), American Concrete Institute, Farmington Hills, 2008.
Canbolat, B. A., Parra-Montesinos, G. J., and Wight, J. K., Experimental Study on Seismic Behavior of High-Performance Fiber-Reinforced Cement Composite Coupling Beams, ACI Structural J., Vol.102, 2005 pp. 159-166.
Lequesne, R.D., Wight, J.K., and Parra-Montesinos, G.J., “High-Performance Fiber-Reinforced Concrete Coupled-Wall Systems: Design and Behavior”, Proceedings of 14 ECEE, 2010.
Parra-Montesinos, G.J., “High-Performance Fiber-Reinforced Cement composites: An Alternative for Seismic Design of Structures”, ACI Structural Journal, September-October, 2005.
鄭志宏，”鋼筋混凝土連接梁反覆載重測試之研究”，碩士論文，國立台灣大學土木工程系，台北，民國99年。
王亭惟，”鋼筋混凝土連接梁耐震鋼筋配置之研究”，碩士論文，國立台灣大學土木工程系，台北，民國100年。
張于軒，”鋼筋混凝土剪力牆連接梁鋼筋配置之研究”，碩士論文，國立台灣大學土木工程系，台北，民國101年。
蔡尚錡，”鋼筋混凝土剪力牆連接梁耐震行為之研究”，碩士論文，國立台灣大學土木工程系，台北，民國102年。
ACI Committee 318, Building Code Requirements for Structural Concrete (ACI 318-11) and Commentary (ACI 318R-11), American Concrete Institute, Farmington Hills, 2011.
楊善淳，”高強度鋼筋混凝土剪力牆連接梁耐震行為之研究”，碩士論文，國立台灣科技大學土木與防災研究所，台北，民國102年。
林秉誼，”鋼筋混凝土剪力牆連接梁耐震配筋之研究”，碩士論文，國立台灣大學土木工程系，台北，民國103年。
吳仲凱，”高強度鋼筋混凝土剪力牆連接梁耐震配筋之研究”，碩士論文，國立中央大學土木工程系，桃園，民國105年。
Hwang, S. J., and Lee, H. J., “Analytical Model for Predicting SfearStrengths of Interior Reinforceed Concreat Beam-Column Joint forSeismic Resistance”, ACI Structural Journal, Vol. 97, No 1, pp. 35-44.January-February 2000.
李宏仁、黃世建，「鋼筋混凝土結構D區域之剪力強度評估-軟化壓拉桿模型簡算法之實例應用」，結構工程，第十七卷，第四期，第53-70頁，2002。
Hwang, S. J., and Lee, H. J., “Strength Prediction for Discontinuity Regions by Softened Strut-and Tie Model”, Journal of Structural Engineering, ASCE, Vol. 128, December 2002, pp. 1519-1526.
Saha ?fer, K., “Strut-and-Tie Models for the Design of Structural Concrete”, Notes of Workshop, Department of Civil Engineering, National Cheng Kung University, Taiwan 1996, pp. 140.
林宜靜，「鋼筋混凝土剪力牆連接梁之剪力強度行為預測研究」，碩士論文，國立台灣大學土木工程系，台北，民國 101 年。
ACI Committee 374, “Acceptance Criteria for Moment Frames Based on Structural Testing and Commentary,” American Concrete Institute, Farmington Hills, 2005.
Hakuto S., Park R., Tanaka H., ─Seismic Load Tests on Interior and Exterior Beam-Column Joints with Substandard Reinforcing Details, ”ACI Structural Journal, 2000, 97(1): 11-25.
劉建宏，”鋼筋混凝土連接梁在往覆水平載重下有/無軸向束制之影響”，碩士論文，國立台灣科技大學營建工程系，台北，民國103年。
Sang Whan Han, Chang Seok Lee, Myoungsu Shin, and Kihak Lee, “Cyclic Performance of Precast Coupling Beams with Bundled Diagonal Reinforcement”, Engineering Structures 93, June 2015, pp. 142-151

指導教授

洪崇展、李顯智

審核日期

2017-8-25

推文