博碩士論文 962306009 詳細資訊




以作者查詢圖書館館藏 以作者查詢臺灣博碩士 以作者查詢全國書目 勘誤回報 、線上人數:30 、訪客IP:44.204.164.147
姓名 謝偉伸(Wei-Shen Hsieh)  查詢紙本館藏   畢業系所 光電科學與工程學系
論文名稱 使用表面等溫度曲線分析材料內部熱傳導之研究
(The thermal conductivity researchinner material by isothermal curve)
相關論文
★ 腦電波傅利葉特徵頻譜之研究★ 光電星雲生物晶片之製作
★ 電場控制器光學應用★ 手機照相鏡頭設計
★ 氣功靜坐法對於人體生理現象影響之研究★ 針刺及止痛在大鼠模型的痛覺量測系統
★ 新光學三角量測系統與應用★ 離軸式光學變焦設計
★ 腦電波量測與應用★ Fresnel lens應用之量測
★ 線型光學式三角量測系統與應用★ 非接觸式電場感應系統
★ 應用田口法開發LED燈具設計★ 巴金森氏症雷射線三角量測系統
★ 以Sol-Gel法製備高濃度TiO2用於染料敏化太陽能電池光電極之特性研究★ 生產線上之影像量測系統
檔案 [Endnote RIS 格式]    [Bibtex 格式]    [相關文章]   [文章引用]   [完整記錄]   [館藏目錄]   [檢視]  [下載]
  1. 本電子論文使用權限為同意立即開放。
  2. 已達開放權限電子全文僅授權使用者為學術研究之目的,進行個人非營利性質之檢索、閱讀、列印。
  3. 請遵守中華民國著作權法之相關規定,切勿任意重製、散佈、改作、轉貼、播送,以免觸法。

摘要(中) 本論文主要在研究探討利用等溫度曲線計算材料內部溫度的方法,由於傳統的量測方式需要接觸材料或是無法達到非破壞性直接量測材料內部溫度,熱電偶式只能測得一部分局部表面溫度,紅外線表面只能得知表面溫度,即使是破壞式量測也容易在破壞過程中產生其他熱源或是使原始溫度流失,不易得知材料內部實際溫度,本論文提出經由公式推導得到一等溫度曲線並配合等效電路可達成在非破壞材料的狀態之下得知材料內部任一點的溫度。量測方法為使用熱傳導原理與等溫度曲線的特性,轉換成熱等效電路計算出材料內部溫度,在一個固定範圍恆溫恆濕的環境下量測以提高準確度,由一外部加熱源提供一固定瓦特數與固定時間的能量,用熱影像儀來取得材料表面溫度,並利用軟體進行二值化影像處理,得到材料表面等溫度曲線,使用熱傳導理論的特性,並將數據資料代入本論文所推導公式,可迅速得到材料內各點溫度。過程中可發現等溫度曲線近似一橢圓形,可得知長短軸的方向,代表材料不同的長寬或是散熱的方向。不同材料的傳熱係數不同,也會得到不同的溫度曲線。材料成分比例的不同也可以利用此方式算出其成分濃度為多少。在學術貢獻上,此論文所推導等溫度曲線方程式,可供後續研究或是相關人員使用,產業貢獻上,可以得到一快速且正確的材料內部溫度量測方法。後續如濃度不同的液體、固體皆可以利用此方法量測,並可以再發展多點熱源量測等研究。
摘要(英) In this paper, we discuss the method of calculating the internal temperature of the material by using the isothermal curve. Because the traditional measurement method needs to contact the material or can not reach the internal temperature of the non-destructive direct measurement material, the thermocouple can only measure a part of the local surface Temperature, infrared surface can only know the surface temperature, even the destruction of the measurement is also prone to damage in the process of generating other heat sources or the original temperature loss, easy to know the actual temperature inside the material, this paper proposed by the formula derived first Temperature curve and with the equivalent circuit can be achieved in the non-destructive material under the state of any material inside the temperature. The measurement method is used to calculate the internal temperature of the material by using the heat conduction principle and the characteristic curve of the isothermal curve. The temperature is measured in a fixed range constant temperature and humidity environment to improve the accuracy, and an external heating source is provided. The surface temperature of the material was determined by thermal image instrument, and the temperature of the material was measured by software. The characteristics of the surface of the material were obtained, and the characteristics of the heat conduction theory were used, and the data were obtained. Derivation of the formula, you can quickly get the material within the point temperature. The process can be found in the isothermal curve similar to an oval, can be informed of the direction of long and short axis, representing the different length of material or the direction of heat. Different materials have different heat transfer coefficients and different temperature curves. The proportion of the composition of the material can also use this method to calculate the composition of the concentration of how much. In the academic contribution, this paper derives the equation of the isothermal curve for later research or related personnel use, industry contribution, can get a fast and correct internal temperature measurement method. Subsequent, such as the concentration of different liquids, solid can use this method of measurement, and can further develop multi-point heat source measurement and other research.
關鍵字(中) ★ 熱傳遞
★ 等溫度曲線
關鍵字(英)
論文目次 目錄
摘要 ⅱ
Abstract ⅲ
誌謝 ⅴ
目錄 ⅵ
圖目錄 ⅹ
表目錄 ⅹⅳ
第一章 緒論 1
1.1 研究動機 1
1.2 研究目的與方法 3
1.3 論文架構 4

第二章 熱傳遞理論與等溫度曲線 5
2.1 熱傳遞理論 5
2.1.1 熱傳導 6
2.1.2 熱對流 9
2.1.3 熱輻射 10
2.2 熱阻與熱傳導係數 11
2.2.1 熱阻 11
2.2.2 熱傳導係數 12
2.3 同質材料的熱傳導係數 13
2.4 不同截面積等效熱阻抗計算方法 14
2.5 熱等效電路轉換方法 16
2.6 等溫度曲面推導 21

第三章 研究方法與實驗 23
3.1 實驗方法 23
3.2 實驗設備 24
3.2.1 雷射 24
3.2.2 熱影像儀 25
3.2.3 影像處理軟體 26
3.2.4 玻璃 27
3.2.5 太陽能板 30
3.2.6 熱電偶 32
3.2.7 壓縮玻璃纖維 34
3.2.8 耐熱膠帶 35
3.3 實驗步驟 35

第四章 實驗結果 43
4.1 實驗結果 43
4.1.1 轉換為熱等效電路 44
4.2.2 利用熱電偶進行驗證 47

第五章 結論與未來展望 49
5.1 結論 49
5.2 未來展望 49

參考文獻 51
參考文獻
參考文獻
[1] 胡凡勳、朱朝煌、邱漢傑,熱傳遞學,第10版,高立圖書,台北市,民國一百年。
[2] 石延平,熱傳遞學,初版,中央圖書,台北市,國民74年。
[3] M. Necati ӦZISIK,Heat Transfer A Basic Approach ,McGraw-Hill,NEW YORK,1985。
[4] Jerry Sergent,Al Krum,THERMAL MANAGEMENT HANDBOOK,McGraw-Hill,Companies,1998
[5] 許正達,「奈米材料應用在散熱技術設計與量測」,國立中央大學,碩士論文,民國98年。
[6] 王曉剛:熱傳學講義,民國98年,取自www.isu.edu.tw/upload/81201/-1/news/postfile_19733.pdf
[6] 中文百科在線-網路百科:新概念熱阻的介紹,民國98年,取自http://www.zwbk.org/MyLemmaShow.aspx?zh=zh-tw&lid=217782
[7] 維基百科:物質的熱導率,民國106年,取自
https://zh.wikipedia.org/wiki/熱導率
[8] 科邁斯集團-產業知識庫:熱傳導-HD 材料的熱傳導係數探討,民國101年,取自
http://www.techmaxasia.com/articles/detail/1196063583
[9] 余秋金,「導熱添加物對複合材料導熱影響」,國立中央大學,碩士論文,民國105年。
[10] 維基百科:熱傳導,民國106年,取自
https://zh.wikipedia.org/wiki/%E7%83%AD%E4%BC%A0%E5%AF%BC
[11] Agilent:熱傳基本概念,民國95年,取自
http://cp.literature.agilent.com/litweb/pdf/5965-5290CHCN.pdf
[12] 林育才教授-計算流力實驗室:熱介面材料之熱傳導係數的量測方法改良研究,民國101年,取自http://eshare.stust.edu.tw/esharefile/2012_6/2012_6_049f6dec.docx
[13] 維基百科:斯特凡-波茲曼定律,民國106年,取自
https://zh.wikipedia.org/wiki/%E6%96%AF%E7%89%B9%E8%97%A9%EF%BC%8D%E7%8E%BB%E5%B0%94%E5%85%B9%E6%9B%BC%E5%AE%9A%E5%BE%8B
[14] YunusA .Cangel,Heat Transfer,McGraw-Hill,NEW YORK,1998
[15] 台灣實驗室網:熱傳導測試儀-瞬變平面熱源法,民國98年,取自http://www.taiwanlab.com.tw/protocol/show.asp?id=1715
[16] John H. Lienhard IV/John H. Lienhard V:A HEAT TRANSFER TEXTBOOK Third Edition. Version 1.31 - MIT,2009,取自
http://web.mit.edu/lienhard/www/ahttv131.pdf
[17] Jung-Kyun Kim, Sung-Ki Nam, Wataru Nakayama, and Sun-Kyu Lee,”Compact-Thermal-Network-Model-of-the-Thermal Interface Material Measurement Apparatus with Multi-Dimensional Heat” FlowIEEE Transactions on components, packaging and manufacturing technology vol. pp.100-103, NO. 8,August, 2011.
[18] Michael H. Bunyan andMiksa deSorgo,”Measurement, Significance and Application of Thermal Properties of Thermal Interface Materials” Using ASTM D5470,pp.15-21,December 2003.
[19] 維基百科:橢球,民國106年,取自
https://zh.wikipedia.org/wiki/%E6%A4%AD%E7%90%83
[20] 海雷雷射:laser-marking,民國100年,取自
http://www.hylax.com/laser-marking/
[21] 維基百科:熱成像儀,民國106年,取自
https://zh.wikipedia.org/wiki/%E7%83%AD%E6%88%90%E5%83%8F%E4%BB%AA
[22] KSON:太陽能板結構,民國106年,取自
http://www.kson.com.tw/chinese/study_23-16.htm
[23] 台塑企業文物館:玻璃纖維,民國106年,取自
http://www.fpgmuseum.com.tw/fiber/fiber_glass.htm
[24] S77260:太陽能發電原理,民國104年,取自
https://s77260.wordpress.com/
[25] Corning:NXT玻璃規格,2015,取自
https://www.corning.com/media/tw/global/documents/ Lotus_NXT_Glass_PI%20-%20FINAL%20-%20TRAD%20CHN.pdf
[27] 長庚大學機械工程研究所:熱電偶原理,民國106年,取自
http://mmrl.cgu.edu.tw/data/mme/rehab/organize/chap2/sensor/no1/no1_1.htm
[28] Graphtec:GL820 產品規格,民國106年,取自
http://www.graphtecchina.com/measuring/index2-2-2.asp
指導教授 張榮森 審核日期 2017-7-20
推文 facebook   plurk   twitter   funp   google   live   udn   HD   myshare   reddit   netvibes   friend   youpush   delicious   baidu   
網路書籤 Google bookmarks   del.icio.us   hemidemi   myshare   

若有論文相關問題,請聯絡國立中央大學圖書館推廣服務組 TEL:(03)422-7151轉57407,或E-mail聯絡  - 隱私權政策聲明