| 摘要(英) |
We took AC-20, AR-8000, PMA, and high-viscosity asphalt(HiAsph) as the factors of the asphalt. Without adding to Hiasph, mineral fibers(MF) were added. Besides, cellulose fibers(CF) were added to PMA for comparing the effects of different fibers. The VFA period was on 5.0%~5.5%(total mix) and prepared for marshell samples and mastics. We took the upper one of the period for the design oil content.
Comparing the mastic rheology and performance of the Specimans, we could conclude that δ was not only highly correlated with the work of IDT, and creep modulus, but also nearly highly correlated with IDT, TSR, and MR. By the way, the correlation of G*/sinδ and depth of the wheeling rutting test was high.
The results of our study presented, we suggest that we could replace the speciman’s performance with the mastic rheology for determination of designing drainage asphalt. Addtionally, we could make a proper design method in local of Taiwan. |
| 參考文獻 |
第六章、參考文獻
1. 吳明宇，「改良型開放級配瀝青混凝土成效特性之研究」，碩士論文，中央大學土木工程研究所，中壢(1999)。
2. 劉守益，「多孔隙瀝青混凝土成效之評估」，碩士論文，中央大學土木工程研究所，中壢(1996)。
3. 黃博仁，「排水性瀝青混合料鋪面試驗路段之成效評估」，碩士論文，中央大學土木工程研究所，中壢(1999)。
4. 林鋒永，「多孔隙瀝青混凝土永久變形特性之試驗室研究」，碩士論文，淡江大學土木工程研究所，淡水(2000)。
5. 曾信智，「多孔隙瀝青混凝土之水份侵害特性研究」，碩士論文，淡江大學土木工程研究所，淡水(2000)。
6. R.W. Smith, J.M. Rice, and S.R. Spelman, “Design of Open-Graded Friction Courses.” Report FHWA-RD-74-2, Federal Highway Administration(1974).
7. H.A. Smith, “Performance Characteristics of Open-Graded Friction Courses.” NCHRP Synthesis of Highway Practice 180, TRB(1992).
8. P.S. Kandhal, and R.B. Mallick,“Open-Graded Friction Course：State of Practice.” Trasportation Research Circular Number E-C005, TRB (1998).
9. R.B. Mallick, P.S. Kandhal, L.A.Cooley, Jr., and D.E. Watson, “Design, Construction, and Performance of New-Generation Open-Graded Friction Courses.” Journal of the Association of Asphalt Paving Technologists (2000).
10.日本道路協會，排水性鋪裝技術指針(案)，東京，日本(1996)。
11.日本道路協會，鋪裝試驗法便覽別冊，東京，日本(1997)。
12. H. A. Barnes, J. F. Hutton, and K. Walters, “An Introduction to Rheology.” Publish by Elsevier, ISBN 0-444-87469-0(1989).
13. Asphalt Institute, Superpave Level 1 Mix Design, Superpave Series No.2 SP-2 (1994).
14. 陳世晃，「改質瀝青混凝土規範之研擬」，碩士論文，中央大學土木工程研究所，pp.11~13(1997)。
15.Van Der Heine, “Asphalt Concrete Materials and Mix Design Practices in Europe.” AAPT, pp.584~611(1992)
16.Jams A. Scherocmam, “Construction of SMA Test Sections in the US.” Journal of the Association of Asphalt Paving Technologists, pp. 642~664(1992).
17.吳昭煌，「拌合場回收細料對瀝青凝土抵抗車轍影響分析」，碩士論文，中央大學土木工工程研究所，pp12~45(1991)。
18.Asphalt Institute, Performance Graded Asphalt Binder Specification and Test, Asphalt Institute Superpave Series No.1(SP-1) (1994).
19.H.U. Bahia, and D.A Anderson, “The New Proposed Rheological Properties of Asphalt Binders：Why are They Required and How do they compare to Conventional Properties.” Physical Properties of Asphalt Cement Binders(1995).
20.F.L. Roberts, P.S. Kandhal, E.R. Brown, D.Y. Lee, and T.W. Kennedy, Hot Mix Asphalt Materials, Mixture Design, and Construction, NAPA Education Foundation, Second Edition, Lanham, Maryland(1996).
21. M.G. Bouldin, and J.H. Collins, “Influence of Binder Rheology on Rut Resistance of Polymer Modified and Unmodified Hot Mix Asphalt.” Polymer Modified Asphalt Binders ASTM STP 1108, American Society for Testing and Materials, Philadephia, pp.50-60(1992).
22. V. Maurile, and B. Bernard, “Gap-Garded Cold Asphalt Concrete：Benefit of Polymer-Modifier Asphalt Cement and Fibers.” Journal of Transportation Research Record 1530, Washington, D.C., USA. pp.9-13(1996).
23 ASTM Standards C612-00A, “Standard Specification for Mineral Fiber Block and Board Thermal Insulation.” ASTM Standards, PA, USA(2000).
24. ASTM Standards C1335-96, “Standard Test Method for Measuring Non-Fibrous Content of Man-Made Rock and Slag Mineral Fiber Insulation.” ASTM Standards, PA, USA(1996).
25. J. Olson, “Measurement of fiber length, coarseness, and shape with the fiber quality analyzer.” Pulp and Paper Research Institute of Canada, BC, Canada.
26.祝錫智，劉明仁，高金盛，「高速公路多孔隙排水面層試鋪及績效評估研究」，期末報告書，pp. 6-1~6-2，淡江大學(1999)。
27.沈金安，改性瀝青及SMA路面，人民交通出版社，北京，中國大陸，第220-221頁(1999) 。
28ASTM E303-93 (Reapproved 1998), “Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester.” Annual book of ASTM Standards, Vol.04.03, pp.687-691(1999).
29.日本道路協會，“Method for Measuring Surface Friction Properties.” 鋪裝試驗法便覽，東京，pp.960-970(1999)。
30.陳淮松，瀝青混凝土土路面工程， pp.211-214，科技圖書公司，台北(1980)。
31.吉兼亨、中西弘光，「多孔隙排水鋪面工程技術」，台灣區國道高速公路局，台北(1999)。
32.房性中，「排水性鋪面使用材料規格暨基本性能需求說明」，現代營建第251期，台北(2000)。
33.郭伯宏，「瀝青膠漿質流性質對車轍行為之影響」，碩士論文，成功大學，台南(2000)。
34.STP 204-19, “Asphalt Film Thickness Determination.” Stansard Test Procedures Manual, Saskachewan Highways and Transportation, Canada(2001).
35.J. Carswell, “Rheology: Measurement, Accuracy, Precision, and prediction.” Proceedings of The 1st European Symposium on Bituminous Materials Rheology and Pavement Performance, London, UK(2000).
36.廖溪坤，「材料對石膠泥瀝青成效特性影響之研究」，碩士論文，中央大學土木工程研究所，中壢(1999)。
37.Maurile, V. and Bernard, B. “Gap-Garded Cold Asphalt Concrete：Benefit of Polymer-Modifier Asphalt Cement and Fibers.”Journal of Transportation Research Record 1530, Washington, D.C., USA, pp.9-13(1996).
38.Brown, E. R. “Designing Stone Matrix Asphalt Mixtures for Rut-Resistant Pavements.” NCHRP Report 425, Washington, D.C., USA(1999).
39.周文賢，統計學，智勝文化事業，台北，第601-603頁(1997) |
[Endnote RIS 格式]
[相關文章]
[文章引用]
[完整記錄]
[館藏目錄]
[檢視]
plurk
funp
live
udn
HD
myshare
netvibes
friend
youpush
delicious
baidu
Google bookmarks
del.icio.us
hemidemi
facebook
twitter
google
reddit