摘要(英) |
The purpose of this study is using a 0.09 mm-diameter drill to investigate the drilling characteristics in an in-circuit-test (ICT) probe plate for printed circuit board (PCB). Through Taguchi Method, four control factors, namely rotational speed, feed rate, drilling method, and cutting fluid, are selected to conduct designed experiments and analyze the results of drilling force, drill hole position precision, accuracy of hole diameter, and drill life. Accordingly, an optimal combination of working parameters for the given drilling task is determined and verified.
A Taguchi Orthogonal Array is selected to design and conduct 9 runs of drilling experiment. Experimental results indicate that drilling force plays an important role in determining the number of holes drilled and wear of drill. Taguchi Method is then applied to calculate the S/N ratios of the data in measuring drill hole position and diameter. As a result, the optimal control factor combination for drill hole position precision is A2B2C1D3, i.e. A2 with rotational speed of 12,000 rpm, B2 with feed rate of 6,000 mm/min, C1 with drilling mode of (a) deep-hole drilling cycle, G83, and D3 with cutting fluid ratio of one liter of cutting fluid and 30 liters of water. On the other hand, the optimal combination of control factors for accuracy of hole diameter is A2B1C3D2, i.e. A2 with rotational speed of 12,000 rpm, B1 with feed rate of 5,000 mm/min, C3 with drilling mode of (c) chip breaking drilling cycle, G73, and D2 with cutting fluid ratio of one liter of cutting fluid and 20 liters of water. Two more experiments using the drilling parameters A2B2C1D3 and A2B1C3D2 are conducted and the results indicate that such two combinations of control factors indeed generate a better performance than the originally designed 9 runs of drilling experiment. The verifying experiments also show that the A2B1C3D2 combination generates better results than the A2B2C1D3 combination. The overall comparison reveals that A2B1C3D2 is the optimal combination of working parameters for drilling holes in the given ICT probe plate of PCB.
|
參考文獻 |
參考文獻
1. 維基百科網站,取自
http://zh.wikipedia.org/wiki/摩爾定律, accessed on January 2, 2015.
2. 林定皓著, 電子構裝載板技術, 台灣印刷電路板協會, 2003.
3. 維基百科網站, 取自
http://zh.wikipedia.org/zh-tw/萬用表, accessed on May 2, 2015.
4. 林定皓著, 電路板電氣測試與AOI檢驗技術簡介, 台灣電路板協會, 2008.
5. 八十島網站, 取自
http://www.yasojima.co.jp/cn/index.html, accessed on January 2,
2015.
6. H. Nakagawa, K. Ogawa, A. Kihara, and T. Hirogaki, “Improvement of Micro-Drilled Hole Quality for Printed Wiring Boards,” Journal of Materials Processing Technology, Vol. 191, pp. 293-296, 2007.
7. L. J. Zheng, C. Y. Wang, L. P. Yang, Y. X. Song, and L. Y. Fu, “Characteristics of Chip Formation in the Micro-Drilling of Multi-Material Sheets,” International Journal of Machine Tools & Manufacture, Vol. 52, pp. 40-49, 2012.
8. J. S. Moon, H. S. Yoon, G. B. Lee, and S. H. Ahn, “Effect of Backstitch Tool Path on Micro-Drilling of Printed Circuit Board,” Precision Engineering, Vol. 38, pp. 691-696, 2014.
9. 梁為翔, “以微鑽頭鑽削PCB板之最佳鑽削參數及其磨耗檢測之研究, ” 台灣科技大學機械工程學系碩士論文, 2004.
10. 陳維瀚, “微細鑽頭鑽削 SUS 304不鏽鋼之鑽削力與鑽刃磨耗研究, ” 台北科技大學製造科技研究所系碩士論文, 2006.
11. 徐啟敏, “不鏽鋼304之微細孔鑽削特性與毛邊去除加工之相關研究,” 台北科技大學製造科技研究所系碩士論文, 2006.
12. 王天毅, “高性能金屬切削油切削效益研究,”中正大學機械工程學系碩士論文, 2005.
13. 周昌禾, “微鑽頭對Inconel 718 鑽削磨耗之研究,” 台北科技大學機電整合研究所碩士論文, 2008.
14. 蔡志忠, “微鑽針鑽削 Inconel 718振動與磨耗特性之研究,” 高雄大學電機工程學系碩士論文, 2010.
15. 白賜清編著, 工業實驗計劃法, 中華民國品質學會, 台北市, 2006.
16. 李輝煌編著, 田口方法―品質設計的原理與實務, 高立書局, 新北市, 2012.
17. 永進機械工業股份有限公司網站, 取自
http://www.ycmcnc.com/chinese/01_products/03_detail.php?cid=1&id=14&ycm=14, accessed on June 20, 2015.
18. 徐永源編著, 數控工具機, 高立書局, 新北市, 1998.
19. 林定皓著, 電路板機械加工技術, 台灣電路板協會, 桃園市,
2007.
20. 張靖霖著, 鑽孔, 台灣電路板協會, 桃園市, 2011.
21. 楊鍚杭、黃廷合著, 微機械加工概論, 全華圖書, 新北市,2008.
|