| 姓名 |
雷文家(Amol Ravindrarao Deshmukh)
查詢紙本館藏 |
畢業系所 |
物理學系 |
| 論文名稱 |
儲氫多孔結構的建模與分析之密度泛函理論研究
(Modelling and Analysis of Porous Frameworks for Hydrogen Storage: A Density Functional Theory Study)
|
| 相關論文 | |
| 檔案 |
 [Endnote RIS 格式]
[Bibtex 格式]
 [相關文章]  [文章引用]  [完整記錄]  [館藏目錄]  [檢視] [下載]- 本電子論文使用權限為同意立即開放。
- 已達開放權限電子全文僅授權使用者為學術研究之目的，進行個人非營利性質之檢索、閱讀、列印。
- 請遵守中華民國著作權法之相關規定，切勿任意重製、散佈、改作、轉貼、播送，以免觸法。
|
| 摘要(中) |
摘要
本論文採用第一性原理方法從事用於儲氫的新穎多孔材料的設計。此研究中開發了一個可靠的熱力學模型並用於估算儲氫系統適合運作的條件。美國能源部依據為了實現有競爭性的輕型氫動力車的技術要求製定了一套發展儲氫系統的性能目標。為了實現這些目標，我們設計了多種從半矽氧烷或金剛烷延伸出來的骨架材料並探討它們是否可以用於儲氫。
本論文第3章展示了如何由修飾過的苯環以及四面體的倍半矽氧烷籠合成一個合理儲氫系統。我們使用第一原理密度泛函理論計算探討使用過渡金屬裝飾並有硼摻雜的四面體倍半矽氧烷骨架(boron doped tetrahedral silsesquioxane frameworks， B-TSF)在儲氫的應用。硼摻雜可以明顯的增強過渡金屬與B-TSF中的連接分子的相互作用並避免過渡金屬原子組成團簇。同時硼摻雜也可以維持穩定的氫氣吸附能。在由Sc，Ti，與V裝飾的B-TSF中氫分子的平均吸附能為 0.29，0.40 以及 0.69 eV並具有可接受的氫氣吸附質量比容量 (6.9, 5.6 以及4.15 wt%)。透過計算吉布斯自由能我們也估算了B-TSF作為儲氫材料的運作溫度和壓力範圍。透過進一步在材料設計上的修改，我們或許可以對儲氫性能進行微調。
在第４章中，我們經由使用較大的倍半矽氧烷與各種連接分子，延伸儲氫的多孔骨架材料設計。如果使用較長的連接分子，對氫的質量比容量可以提高到7.5 wt%以上。除此之外，通過改變半矽氧烷的大小，體積比容量可增加到70 g/L 以上。此研究將從事摻雜Sc, Ti等過度金屬的多面體低聚倍半矽氧烷 (polyhedral oligomeric silsesquioxane，POSS)骨架結構的設計。在這一段中，我們不只會探討各種POSS結構可儲蓄多少氫，我們也會討論一些關於那些含有金屬裝飾的結構的穩定性問題，例如會導致儲氫容量下降的金屬簇集反應。除此之外，這項研究將展示如何透過組合不同大小的半矽氧烷以及連接分子來調節POSS結構對氫的質量與體積比容量。
我們在第五章探討五種不同含有Sc裝飾由金剛烷延伸出來的骨架材料的吸氫反應。這裡所探討的五種不同骨架材料是由被不同分子結構連結起來的多羥基金剛烷組成的。當骨架材料完全被氫覆蓋時，平均每個H2分子的吸附能在-0.17與 -0.19 eV之間。我們使用一個簡單的熱力學模型來估計在不同溫度與壓力下的五種材料對氫氣吸附的質量與體積比容量。在此研究中，最有潛力的骨架材料使用苯環結構作為結構分子。該骨架被預測在溫度為358 K及氫氣壓強為100 bar時可吸附4.38 wt% 或 39.82 g/L的氫。由於在此章節討論的骨架材料對於氫的相互作用較弱，在一般儲氫材料的操作條件下，這些材料的氫氣覆蓋率明顯的低於材料完全被覆蓋的情況。這個研究結果展現了探討溫度與壓力對吸氫反應的影響的必要性。
關鍵詞
氫氣儲存，多孔骨架，熱力學，質量與體積比容量，密度泛函理論，再生能源 |
| 摘要(英) |
Abstract
This thesis deals with the design of novel porous materials with respect to target based hydrogen storage using first principle methods. In order to achieve the performance-based targets, the silsesquioxane and adamantane based frameworks are designed and investigated for hydrogen storage application.
The design of a plausible hydrogen storage system based on assembling the modified benzene rings and tetrahedral silsesquioxane cages is demonstrated in Chapter 3. The transition metals (TM) decorated boron doped tetrahedral silsesquioxane frameworks (B-TSF) for application in hydrogen storage are investigated using first-principles density functional theory calculations. Boron substitution substantially enhances the TM binding energy to the linker of B-TSF to suppress metal clustering as well as maintain stable hydrogen adsorption energy to TMs. The average hydrogen adsorption energies in Sc-, Ti-, and V-decorated B-TSF are 0.29, 0.40, and 0.69 eV, respectively, with an acceptable gravimetric density of 6.9, 5.6, and 4.15 wt %. Gibbs free energy calculations are also carried out to estimate the working temperature and pressure ranges for using B-TSF as a hydrogen storage system. Further modifications in the design of the frameworks may allow us to tune the hydrogen storage properties.
In Chapter 4, the porous frameworks composed of larger silsesquioxane cages linked via a variety of TMs decorated boron doped linkers are designed for hydrogen storage. The H2 gravimetric capacity can be improved to more than 7.5 wt% by using longer linkers. On the other hand, the maximum H2 volumetric capacity can be tuned to more than 70 g/L by varying the size of silsesquioxane cages. This study will deal with polyhedral oligomeric silsesquioxane (POSS) frameworks that are doped with TMs such as scandium (Sc) or titanium (Ti). In this section, the discussion will not only on the H2 uptake in various POSS frameworks but also cover some issues on the stability of the metal decorated framework, e.g., the unwanted clustering of the doped metal. Furthermore, this study will demonstrate that the gravimetric and volumetric capacities of POSS frameworks can be tuned by combining silsesquioxane cages and linkers of different sizes.
In Chapter 5, the hydrogen adsorption in five Sc decorated porous, adamantane based frameworks have been investigated. Each of these frameworks consists of polyhydroxy adamantane units that are connected by a different molecular linker. At full coverage the average H2 adsorption energy is between -0.17 and -0.19 eV per H2 molecule. We use a simple thermodynamic model to estimate the gravimetric and volumetric hydrogen uptake as a function of temperature and pressure. The most promising framework considered here is a structure with benzene units as linkers and is predicted to achieve 4.38 wt% or 39.82 g/L H2 uptake at 358 K and 100 bar H2 pressure. The relatively weak framework-H2 interaction leads to the circumstance that at typical operating conditions, the hydrogen uptake still deviates in non-negligible fashion form full coverage. This finding illustrates the necessity to account for the temperature and pressure dependency of the H2 uptake.
Keywords
Hydrogen storage, porous framework, thermodynamics, gravimetric and volumetric capacities, porous frameworks, density functional theory, renewable energy |
| 關鍵字(中) |
★ 氫氣儲存
★ 多孔骨架
★ 熱力學
★ 質量與體積比容量
★ 密度泛函理論
★ 再生能源 |
關鍵字(英) |
★ Hydrogen storage
★ Porous framework
★ thermodynamics
★ gravimetric and volumetric capacities
★ porous frameworks
★ density functional theory, renewable energy |
| 論文目次 |
Front Cover………………………………………I
Letter of Authorization for Electronic Thesis and Dissertation………II
Verification letter from Oral Examination Committee ……………………IV
Acknowledgment………………………V
Abstract……………………………VII
Table of Content …………………X
List of Figures…………………XII
List of Tables…………………XVII
Chapter 1: General Introduction 1
1.1 Scope and Motivation 1
1.2 The Hydrogen Economy 4
1.3 Hydrogen production 6
1.3.1 Coal gasification 6
1.3.2 Steam reforming 7
1.3.3 Partial oxidation 7
1.3.4 Water electrolysis 8
1.4 Hydrogen storage 12
1.4.1 Compressed hydrogen gas 13
1.4.2 Cryogenic liquid hydrogen 14
1.4.3 Solid State Hydrogen 15
1.4.4 Metal hydride 17
1.4.5 Porous nanomaterials 18
1.5 Hydrogen Fuel cell 29
1.6 Objectives of the Thesis 30
1.7 References 32
Chapter 2: Theoretical Background 39
2.1 Many body problem 39
2.2 Density Functional Theory 41
2.2.1 Local Density Approximation 44
2.2.2 Generalized Gradient Approximation 45
2.3 Thermodynamic Model 46
2.3.1 Gibbs Free Energy Correction 46
2.3.2 Coverage rate and Adsorption constant 50
2.4 References 53
Chapter 3: Tetrahedral Silsesquioxane Framework: A Feasible Candidate for Hydrogen Storage 54
3.1 Introduction 54
3.2 Computational Details 57
3.3 Framework model 58
3.4 Result and Discussion 60
3.4.1 Metal adsorption on isolated benzene ring and TSF with boron substitution 60
3.4.2 Hydrogen adsorption on metal decorated complexes and B-TSF 65
3.4.3 The proper operating temperature and pressure of B-TSF hydrogen storage system with Gibbs free energy estimation 69
3.5 Conclusion 73
3.6 References 75
Chapter 4: Tunable Gravimetric and Volumetric Hydrogen Storage Capacities in Polyhedral Oligomeric Silsesquioxane Frameworks 79
4.1 Introduction 79
4.2 Methodology 82
4.3 Computational Details 84
4.4 Results 85
4.4.1 Metal binding energies on linker molecules and on silsesquioxane cages. 85
4.4.2 Hydrogen adsorption energies on isolated, metal decorated linkers. 89
4.4.3 H2 adsorption in POSS frameworks. 91
4.5 Discussion 99
4.6 Conclusion 102
4.7 References 103
Chapter 5: DFT Study on the H2 Storage Properties of Sc Decorated Covalent Organic Frameworks Based on Adamantane Units 107
5.1 Introduction 107
5.2 Framework Models 109
5.3 Computational Details 111
5.4 Thermodynamic Model 112
5.5 Results 115
5.5.1 Hydrogen Adsorption 115
5.5.2 Comments on the Chemical Stability and the Synthesis of the AFs 127
5.5.3 On the Uncertainty Introduced by the Simplified Normal Mode Analysis 132
5.6 Conclusion 135
5.7 References 137
Chapter 6: Concluding Remarks 142
6.1 Conclusions 142
6.2 Future work 146
6.3 References 148 |
| 參考文獻 |
Front Cover………………………………………………………I
Letter of Authorization for Electronic Thesis and Dissertation……………………II
Verification letter from Oral Examination Committee …………………………………IV
Abstract ……………………………………………………V
Acknowledgment …………………………………………VIII
Table of Content …………………………………………X
List of Figures……………………………………………XII
List of Tables……………………………………………XVII
Chapter 1: General Introduction 1
1.1 Scope and Motivation 1
1.2 The Hydrogen Economy 4
1.3 Hydrogen production 6
1.3.1 Coal gasification 6
1.3.2 Steam reforming 7
1.3.3 Partial oxidation 7
1.3.4 Water electrolysis 8
1.4 Hydrogen storage 12
1.4.1 Compressed hydrogen gas 13
1.4.2 Cryogenic liquid hydrogen 14
1.4.3 Solid State Hydrogen 15
1.4.4 Metal hydride 17
1.4.5 Porous nanomaterials 18
1.5 Hydrogen Fuel cell 29
1.6 Objectives of the Thesis 30
1.7 References 32
Chapter 2: Theoretical Background 39
2.1 Many body problem 39
2.2 Density Functional Theory 41
2.2.1 Local Density Approximation 44
2.2.2 Generalized Gradient Approximation 45
2.3 Thermodynamic Model 46
2.3.1 Gibbs Free Energy Correction 46
2.3.2 Coverage rate and Adsorption constant 50
2.4 References 53
Chapter 3: Tetrahedral Silsesquioxane Framework: A Feasible Candidate for Hydrogen Storage 54
3.1 Introduction 54
3.2 Computational Details 57
3.3 Framework model 58
3.4 Result and Discussion 60
3.4.1 Metal adsorption on isolated benzene ring and TSF with boron substitution 60
3.4.2 Hydrogen adsorption on metal decorated complexes and B-TSF 65
3.4.3 The proper operating temperature and pressure of B-TSF hydrogen storage system with Gibbs free energy estimation 69
3.5 Conclusion 73
3.6 References 75
Chapter 4: Tunable Gravimetric and Volumetric Hydrogen Storage Capacities in Polyhedral Oligomeric Silsesquioxane Frameworks 79
4.1 Introduction 79
4.2 Methodology 82
4.3 Computational Details 84
4.4 Results 85
4.4.1 Metal binding energies on linker molecules and on silsesquioxane cages. 85
4.4.2 Hydrogen adsorption energies on isolated, metal decorated linkers. 89
4.4.3 H2 adsorption in POSS frameworks. 91
4.5 Discussion 99
4.6 Conclusion 102
4.7 References 103
Chapter 5: DFT Study on the H2 Storage Properties of Sc Decorated Covalent Organic Frameworks Based on Adamantane Units 107
5.1 Introduction 107
5.2 Framework Models 109
5.3 Computational Details 111
5.4 Thermodynamic Model 112
5.5 Results 115
5.5.1 Hydrogen Adsorption 115
5.5.2 Comments on the Chemical Stability and the Synthesis of the AFs 127
5.5.3 On the Uncertainty Introduced by the Simplified Normal Mode Analysis 132
5.6 Conclusion 135
5.7 References 137
Chapter 6: Concluding Remarks 142
6.1 Conclusions 142
6.2 Future work 146
6.3 References 148 |
| 指導教授 |
郭哲來(Dr. Jer-Lai Kuo)
|
審核日期 |
2018-7-2 |
| 推文 |
 facebook  plurk  twitter  funp  google  live  udn  HD  myshare  reddit  netvibes  friend  youpush  delicious  baidu
|
| 網路書籤 |
 Google bookmarks  del.icio.us  hemidemi myshare
|
