姓名 |
彭春明(Chun-Ming Peng)
查詢紙本館藏 |
畢業系所 |
工業管理研究所在職專班 |
論文名稱 |
廢棄物資源化產業產能最佳化配置
|
相關論文 | |
檔案 |
[Endnote RIS 格式]
[Bibtex 格式]
[相關文章] [文章引用] [完整記錄] [館藏目錄] 至系統瀏覽論文 ( 永不開放)
|
摘要(中) |
本研究以國內某廢棄物處理廠為研究個案,廢棄物處理產業是綠色產業中重要的一環,也是綠色經濟時代的主力產業,過去台灣廢棄物處理的發展重心大多集中在回收製程上;廢棄物處理產業廠的產能規劃都依據經驗以試算表安排產線生,除費時之外,往往無法妥善規劃多生產區域的整體產能,造成對此產業無法提供最佳生產排程、規劃及決策參考。
本研究主要目的在於發掘廢棄物處理產業提出一新方法,以線性規劃最佳化手法為基礎,考量相關限制,規劃各產品的生產數量,以及細部的廢棄物指派。
所提出的方法,除能使產能與獲利最大化外,產能規劃人員得以根據結果,進行必要的生產調整,亦可作為決策者就產能擴充與否的參考,不僅可提升台灣廢棄物產業的生產時效及改革傳統的設計生產流程,更可以為個案公司搶先市場提升競爭力。
|
摘要(英) |
This study takes a domestic waste treatment plant as a research case. The waste treatment industry is an important part of the green industry and the main industry in the era of green economy. In the past, the focus of Taiwan′s waste treatment development was mostly concentrated on the recycling process; The production capacity planning of the industrial plant is based on experience. The production line is arranged by trial balance. In addition to the time-consuming, it is often impossible to properly plan the overall production capacity of the multi-production area, resulting in the industry not being able to provide the best production schedule, planning and decision-making reference.
The main purpose of this study is to explore a new approach to the waste treatment in-dustry, based on linear planning optimization techniques, to consider the relevant constraints, to plan the production of each product, and to detail the waste assignment.
In addition to maximizing capacity and profitability, the proposed method enables the production planners to make necessary production adjustments based on the results, and also serves as a reference for decision makers on capacity expansion, which not only enhances the waste industry in Taiwan. Production timeliness and reform of traditional design and production processes can further enhance the competitiveness of case companies in the market.
|
關鍵字(中) |
★ 線性規劃 ★ 排程理論 ★ 再利用 ★ 廢棄物 |
關鍵字(英) |
★ linear programming ★ scheduling theory ★ reuse ★ garbage |
論文目次 |
目 錄
中文摘要 i
ABSTRACT ii
目錄 ⅲ
圖 目 錄 v
表 目 錄 vi
一、緒論 1
1.1 研究背景 1
1.2 研究動機 3
1.3 研究目的 4
1-4 研究流程 5
二、文獻探討 6
2-1 廢棄物處理產業政策 6
2-2 廢棄物清理法沿革 12
2-2-1 廢棄物清理法起源 12
2-2-2 廢棄物清理法的發展 14
2-3 廢棄物資源化商業模式 18
2-4 最佳化排程相關文獻 19
三、研究方法 21
3-1 研究步驟 21
3-2 線性規劃介紹 22
3-3 線性規劃應用範圍 25
四、個案研究 26
4-1 背景說明、問題描述 26
4-1-1 廢棄物項目 26
4-1-2 資源化產品項目 27
4-1-3 生產作業區 28
4-1-4 生產作業流程 29
4-2 問題簡介 31
4-3問題需求及定義 32
五、結論與建議 37
5-1 結論及建議 37
5-2 未來的研究方向 39
參考資料 41 |
參考文獻 |
[1] 資源再生化產業-工業廢棄物清理與資源化資訊網(2019)。
https://riw.tgpf.org.tw/recycle
[2]行政院環境保護署-行政公開資訊、環保統計(2019)。
https://www.epa.gov.tw/np.asp?ctNode=30662&mp=epa
[3]行政院環境保護署-事業廢棄物申報及管理資訊系統(2019)
http://waste.epa.gov.tw/prog/IndexFrame.asp?Func=5
[4]循環台灣基金會(2018),産業共生在丹麥:1961-2014 將近半世紀的成長和變革:廢棄、排放物需要資源化,而非去化。
https://www.circular-taiwan.org/symbiosis
[5]賴瑩瑩(2017),從廢棄物管理到資源循環暨邁向循環經濟,行政院廢棄物管理處報告,未出版。
[6]吳盛宗(2015),廢棄物管理未來展望從資源循環至循環經濟,綠基會通訊,40期,5-7頁。
[7]李公哲等(2001),廢棄物低固化材料固化處理技術研究計畫,行政院環境保護署廢棄物管理處(計畫編號EPA-90-U1H1-02-116),未出版。
[8]李宜樺等(2013),工業廢棄物清除處理及再利用實務輯,台北市:行政院環境保護署。
[9]陳良棟(2015年6月),循環經濟時代談台灣產業發展,綠基會通訊,40期,2-4頁。
[10]方述誠(1993),線性規劃(Linear Programming),數學傳播,17期,1-12頁。
[11]Frederick S.Hillier & Gerald J.Lieberman, 作業研究(Ⅰ),第六板,馮景如,麥格羅希爾,台灣,1996。
[12] 工業污染防治100期,廢棄物清理與資源化之發展沿革
[13] 宋立夫,「有關系統設計人力安排方法之研究」 ,國立中央大學,機械工程學系,碩士論文,1996。
[14]王義明,「晶圓製造廠黃光區重排程時點之探討」,國立雲林科技大學,碩士論文,2002。
[15]高志魁,「關鍵鏈排程於營建工程排程之研究」,中華大學,碩士論文,2003。
[16]蘇家弘,「影響筆記型電腦使用者使用平板電腦意願之研究」,世新大學,碩士論文,2012。
[17]Martinez, F., Vazquez-Brust, D. A., Peattie, K., & Zokaei, K. (2012). LCA and Linear Programming for the Environmental Optimization of Waste Management Systems: A Simulation. , Salomone R., Saija。
[18]Fidelis, R., & Colmenero, J. C. (2018). Evaluating the performance of recycling cooperatives in their operational activities in the recycling chain. Resources, Conservation and Recycling, 130, 152-163.
[19]Mafakheri, F., & Nasiri, F. (2014). Modeling of biomass-to-energy supply chain opera-tions: Applications, challenges and research directions. Energy Policy, 67, 116-126.
[20]Hegazy, Tarek, and Petzold, Kevin (2003), “Genetic Optimization for Dynamic Project Control”, J. of Constr. Engrg. and Mgmt., ASCE, 129(4), 396-404.
|
指導教授 |
高信培(Hsin-Sin-PEI Kao)
|
審核日期 |
2019-7-19 |
推文 |
facebook plurk twitter funp google live udn HD myshare reddit netvibes friend youpush delicious baidu
|
網路書籤 |
Google bookmarks del.icio.us hemidemi myshare
|