參考文獻 |
[1] K. Chien and H. Chiou, "A 0.6–6.2 GHz wideband LNA using resistive feedback and gate inductive peaking techniques for multiple standards application," in 2013 Asia-Pacific Microwave Conference Proceedings (APMC), 2013, pp. 688-690.
[2] O. A. Hidayov, N. H. Nam, G. Yoon, S. K. Han, and S. G. Lee, "0.7-2.7 GHz wideband CMOS low-noise amplifier for LTE application," Electronics Letters, vol. 49, no. 23, pp. 1433-1435, 2013.
[3] Y. Lin, C. Wang, G. Lee, and C. Chen, "High-Performance Wideband Low-Noise Amplifier Using Enhanced π-Match Input Network," IEEE Microwave and Wireless Components Letters, vol. 24, no. 3, pp. 200-202, 2014.
[4] N. Li, W. Feng, and X. Li, "A CMOS 3–12-GHz Ultrawideband Low Noise Amplifier by Dual-Resonance Network," IEEE Microwave and Wireless Components Letters, vol. 27, no. 4, pp. 383-385, 2017.
[5] Y. Yu, H. Liu, Y. Wu, and K. Kang, "A 54.4–90 GHz Low-Noise Amplifier in 65-nm CMOS," IEEE Journal of Solid-State Circuits, vol. 52, no. 11, pp. 2892-2904, 2017.
[6] P. Chang and S. S. H. Hsu, "A Compact 0.1–14-GHz Ultra-Wideband Low-Noise Amplifier in 0.13-µm CMOS," IEEE Transactions on Microwave Theory and Techniques, vol. 58, no. 10, pp. 2575-2581, 2010.
[7] B. Guo and X. Li, "A 1.6–9.7 GHz CMOS LNA Linearized by Post Distortion Technique," IEEE Microwave and Wireless Components Letters, vol. 23, no. 11, pp. 608-610, 2013.
[8] M. A. Roein, "Design and analysis of a 3.1–10.6 GHz UWB low noise amplifier with current reused technique," in 2019 5th Conference on Knowledge Based Engineering and Innovation (KBEI), 2019, pp. 030-035.
[9] Yo-Sheng Lin , Jin-Fa Chang, and Shey-Shi Lu, “Analysis and design of CMOS distributed amplifier using inductively peaking cascaded gain cell for UWB systems, ”IEEE Trans. Microw. Theory Tech., vol. 59, no. 10, Oct. 2011.
[10] A. Mineyama, Y. Kawano, M. Sato, T. Suzuki, N. Hara, and K. Joshin, "A millimeter-wave CMOS low noise amplifier using transformer neutralization techniques," in Asia-Pacific Microwave Conference 2011, 2011, pp. 223-226.
[11] J. Tsai, W. Huang, C. Lin, and R. Chang, "An X-band low-power CMOS low noise amplifier with transformer inter-stage matching networks," in 2014 9th European Microwave Integrated Circuit Conference, 2014, pp. 524-527.
[12] H. Tsai, H. Pan, H. Chen, and J. Y. Liu, "A W-Band Low-Noise Amplifier with Shunt Inductors and Transformer Feedback Gm-Boosting Techniques," in 2018 Asia-Pacific Microwave Conference (APMC), 2018, pp. 657-659.
[13] T. Yao et al., "Algorithmic Design of CMOS LNAs and PAs for 60-GHz Radio," IEEE Journal of Solid-State Circuits, vol. 42, no. 5, pp. 1044-1057, 2007.
[14] J. Chang and Y. Lin, "3.15 dB NF, 7.2 mW 3–9 GHz CMOS ultra-wideband receiver front-end," Electronics Letters, vol. 47, no. 25, pp. 1401-1402, 2011.
[15] C. Li, C. Kuo, and M. Kuo, "A 1.2-V 5.2-mW 20–30-GHz Wideband Receiver Front-End in 0.18-µm CMOS," IEEE Transactions on Microwave Theory and Techniques, vol. 60, no. 11, pp. 3502-3512, 2012.
[16] J. Kim and J. Silva-Martinez, "Low-Power, Low-Cost CMOS Direct-Conversion Receiver Front-End for Multistandard Applications," IEEE Journal of Solid-State Circuits, vol. 48, no. 9, pp. 2090-2103, 2013.
[17] A. W. L. Ng, S. Y. Zheng, H. Leung, Y. Chao, and H. C. Luong, "A 0.9GHz–5.8GHz SDR receiver front-end with transformer-based current-gain boosting and 81-dB 3rd-order-harmonic rejection ratio," in 2013 Proceedings of the ESSCIRC (ESSCIRC), 2013, pp. 181-184.
[18] R. Ye, T. Horng, and J. Wu, "Low-Noise and High-Linearity Wideband CMOS Receiver Front-End Stacked With Glass Integrated Passive Devices," IEEE Transactions on Microwave Theory and Techniques, vol. 62, no. 5, pp. 1229-1238, 2014.
[19] A. Homayoun and B. Razavi, "A Low-Power CMOS Receiver for 5 GHz WLAN," IEEE Journal of Solid-State Circuits, vol. 50, no. 3, pp. 630-643, 2015.
[20] K. Kwon, J. Han, and I. Nam, "A Wideband Receiver Front-End Employing New Fine RF Gain Control Driven by Frequency-Translated Impedance Property," IEEE Microwave and Wireless Components Letters, vol. 25, no. 4, pp. 247-249, 2015.
[21] H. Wu, N. Wang, Y. Du, and M. F. Chang, "A Blocker-Tolerant Current Mode 60-GHz Receiver With 7.5-GHz Bandwidth and 3.8-dB Minimum NF in 65-nm CMOS," IEEE Transactions on Microwave Theory and Techniques, vol. 63, no. 3, pp. 1053-1062, 2015.
[22] T. Heller, E. Cohen, and E. Socher, "A 102–129-GHz 39-dB Gain 8.4-dB Noise Figure I/Q Receiver Frontend in 28-nm CMOS," IEEE Transactions on Microwave Theory and Techniques, vol. 64, no. 5, pp. 1535-1543, 2016.
[23] Y. Ping-Chun, L. Wei-Cheng, and C. Hwann-Kaeo, "Compact 28-GHz subharmonically pumped resistive mixer MMIC using a lumped-element high-pass/band-pass balun," IEEE Microwave and Wireless Components Letters, vol. 15, no. 2, pp. 62-64, 2005.
[24] T. Wu and C. Meng, "10-GHz Highly Symmetrical Sub-Harmonic Gilbert Mixer Using GaInP/GaAs HBT Technology," IEEE Microwave and Wireless Components Letters, vol. 17, no. 5, pp. 370-372, 2007.
[25] D. Y. Jung and C. S. Park, "A Low-Power, High-Suppression V-band Frequency Doubler in 0.13 µm CMOS," IEEE Microwave and Wireless Components Letters, vol. 18, no. 8, pp. 551-553, 2008.
[26] J. Tsai, H. Yang, T. Huang, and H. Wang, "A 30–100 GHz Wideband Sub-Harmonic Active Mixer in 90 nm CMOS Technology," IEEE Microwave and Wireless Components Letters, vol. 18, no. 8, pp. 554-556, 2008.
[27] H. Wei, C. Meng, P. Wu, and K. Tsung, "K-Band CMOS Sub-Harmonic Resistive Mixer With a Miniature Marchand Balun on Lossy Silicon Substrate," IEEE Microwave and Wireless Components Letters, vol. 18, no. 1, pp. 40-42, 2008.
[28] J. Oh, S. Moon, D. S. Kang, and S. Kim, "High-Performance 94-GHz Single-Balanced Diode Mixer Using Disk-Shaped GaAs Schottky Diodes," IEEE Electron Device Letters, vol. 30, no. 3, pp. 206-208, 2009.
[29] J. Chen and H. Wang, "A High Gain, High Power K-Band Frequency Doubler in 0.18µm CMOS Process," IEEE Microwave and Wireless Components Letters, vol. 20, no. 9, pp. 522-524, 2010.
[30] C. Xu, X. Feng, H. Ru, and W. Xin′an, "Design of radar single-balance mixer for intelligent transportation," in 2012 International Conference on Microwave and Millimeter Wave Technology (ICMMT), 2012, vol. 5, pp. 1-4.
[31] C. Yeh et al., "A 3.5 GHz antiparallel diode pair mixer in GaN-on-Si HEMT technology," in 2012 4th International High Speed Intelligent Communication Forum, 2012, pp. 1-4.
[32] O. Habibpour, J. Vukusic, and J. Stake, "A 30-GHz Integrated Subharmonic Mixer Based on a Multichannel Graphene FET," IEEE Transactions on Microwave Theory and Techniques, vol. 61, no. 2, pp. 841-847, 2013.
[33] M. v. Heijningen, J. A. Hoogland, A. P. d. Hek, and F. E. v. Vliet, "6–12 GHz double-balanced image-reject mixer MMIC in 0.25μm AlGaN/GaN technology," in 2014 9th European Microwave Integrated Circuit Conference, 2014, pp. 65-68.
[34] H. Chiou, Y. Chen, and H. Yen, "A 5–12 GHz double-balanced power mixer with differential transmission-line transformer in 0.18 μm CMOS," in 2017 IEEE CPMT Symposium Japan (ICSJ), 2017, pp. 25-28.
[35] T. T. Nguyen, K. Fujii, and A. Pham, "Highly Linear Distributed Mixer in 0.25- µm Enhancement-Mode GaAs pHEMT Technology," IEEE Microwave and Wireless Components Letters, vol. 27, no. 12, pp. 1116-1118, 2017.
[36] M. Y. Algumaei, N. A. Shairi, Z. Zakaria, and B. H. Ahmad, "A Single Balanced Mixer Using Compact Branch Line Balun for Ultra-Wideband Applications," in 2018 IEEE International Workshop on Electromagnetics:Applications and Student Innovation Competition (iWEM), 2018, pp. 1-2.
[37] S. Pegwal, M. P. Abegaonkar, A. Basu, and S. K. Koul, "Single Balanced Mixer for UWB Applications," in 2018 IEEE International Symposium on Radio-Frequency Integration Technology (RFIT), 2018, pp. 1-3.
[38] 陳品豪, "低功耗I/Q寬頻接收機前端電路應用於C/X頻帶," 碩士, 電機工程學系, 國立中央大學, 桃園縣, 2017.
[39] 徐冠忠, "應用於C/X頻段之互補式金氧半導體低功耗寬頻接收機前端電路暨X頻段氮化鎵發射機之研製," 碩士, 電機工程學系, 國立中央大學, 桃園縣, 2018.
[40] 傅奕文, "應用變壓器耦合與負偏壓技術於Ka頻段單刀雙擲開關器暨應用電容共振技術於X/Ka頻段III-V族開關器之研製," 碩士, 電機工程學系, 國立中央大學, 桃園縣, 2018. |