K公司訂貨會作業流程改善

以作者查詢圖書館館藏

、以作者查詢臺灣博碩士

、以作者查詢全國書目

、勘誤回報

、線上人數：42

、訪客IP：18.188.218.219

姓名

簡瑋男(Wei-Nan Chien) 查詢紙本館藏

畢業系所

資訊管理學系在職專班

論文名稱

K公司訂貨會作業流程改善
(Towards an Improved Operational Process of Procurement Conference for Apparel Company K)

相關論文

★ 製藥業的成本會計評估研究─ 一個ABC成本制度的應用	★ 一個保險業的資料採擷應用--業務員的薪酬制度分析
★ 農漁產品電子化交易中分類分級管理之研究	★ 應用類神經網路建構壽險核保決策支援之研究
★ 企業導入ERP之關鍵成功因素-個案研究	★ 體外診斷醫療器材滿足CE及GMP驗證要求之個案研
★ 企業資訊系統委外研究－以個案銀行為例	★ DRAM月平均價格變動分析
★ 定期航運產業運價及運送時間對經營績效影響之研究-以某外商海運公司在台灣經營為例	★ 以交通儲值卡作為電子支付工具的營運模式及可行性分析
★ 軟體公司能力成熟度評估	★ 加速台灣海關的通關便捷化－提升行動化服務的解決方案
★ 以均勻度係數為預測晶圓良率指標之可行性分析-以國內某DRAM廠為例	★ 某公司資訊部門變革失敗之探討
★ 資訊部門導入ITIL 管理機制之現況分析─ 以企業導入ITIL 服務支援為例	★ 導入WCO SAFE 優質企業之可行性分析–以A航空公司為例

檔案

[Endnote RIS 格式]

[Bibtex 格式]

[相關文章]

[文章引用]

[完整記錄]

[館藏目錄]

至系統瀏覽論文 ( 永不開放)

摘要(中)

隨著網路的出現、電商的崛起及社群媒體的影響，依賴實體門市創造主要業績的品牌服飾業者遭遇到了不少的挑戰。而在快時尚產業的衝擊之下，傳統成衣業者其商品設計、研發、生產週期較長的作業流程也顯得十分笨重、沒有效率。
個案公司每次舉辦訂貨會時，訂單相關作業都會發生延遲，導致後續作業跟著延遲，進而造成公司營收的損失。經分析後找出主要問題為： (1) 商品下單重要資訊並未明確提供給相關作業人員，作業人員無足夠資訊可參考，造成作業反覆進行 (2) 整併布相關作業要等到調單作業完成匯入系統後才能進行，作業流程有改善空間 (3) 流程中許多人工作業，效率不佳又容易出錯。
本論文建議K公司將原有作業流程拆分為兩個獨立的流程。第一個流程將相關作業電子化並進行流程調整，讓整併布相關作業能夠與調單作業同步進行，提升整體作業效率。第二個流程讓部分商品毋須經過調單過程，直接進入原料採購等後續作業，效率大幅度提升。流程改善後除了能為個案公司減少作業時間外，還能為企業每年創造更多的營業收入。

摘要(英)

With the phenomenal growth of the Internet and e-commerce, coupled with the influence of social media, brand apparel companies that rely on physical stores for revenue generation have encountered insurmountable challenges. Under the impact of fast fashion, the traditional garment industry′s product design, R&D, and production cycle appears to be very cumbersome and inefficient.
The focus of this study, Company K, is an apparel brand operator. It organizes a procurement conference every season, for its channels to place orders. However, every season, the order-related operations were delayed. This results in delays in subsequent operations, which in turn denting its revenue and profit. This study attempts to looking into the problem, and identified the major bottlenecks. First, the important information of the order placed is not clearly communicated to the officer in charge, who then work with insufficient reference information, resulting in repeated pre-order adjustments. Second, fabric consolidation and replacement related operations do not start before pre-order adjustments is completed. Third, there are many manual operations that are inefficient and error-prone.
This study proposes the followings. First, split the original operations into 2 processes. The first process digitizes related operations and adjusts the process, so that the fabric consolidation and replacement related operations can be performed concurrently with the pre-order adjustments, and the overall work efficiency could be improved. The second process allows some products to go directly to follow-up operations such as raw material procurement without the need to go through the pre-order adjustment process. Through these improvements, efficiency is expected to be vastly enhanced, and this in turn could result in more operating revenue and profit.

關鍵字(中)

★ 訂貨會
★ 流程改善
★ 企業流程管理
★ ECRS
★ 同步工程

關鍵字(英)

★ Procurement conference
★ process improvement
★ business process management
★ ECRS
★ concurrent engineering

論文目次

摘要 ii
Abstract iii
誌謝 iv
目錄 v
圖目錄 vi
表目錄 vii
第一章緒論 1
1.1 研究背景 1
1.2 研究動機 1
1.3 研究目的 2
1.4 研究流程 3
第二章文獻探討 4
2.1 訂貨會 4
2.2 企業流程管理 5
2.3 Eliminate Combine Rearrange Simplify (ECRS) 分析 7
2.4 同步工程 (Concurrent Engineering) 8
第三章個案研究 9
3.1 產業背景 9
3.2 K公司簡介 13
3.3 現況說明 14
3.4 問題分析 20
第四章改善方案 24
4.1 改善方案 24
4.2 改善方案導入規劃 34
4.3 可行性研究 39
第五章結論與建議 45
5.1 預期改善結果與效益 45
5.2 未來方向與建議 47
參考文獻 48

參考文獻

參考文獻
中文
1. 行政院主計總處 (2021)，就業者之從業身分－按中分類行業分。引用日期：2021/05/01，
網址：https://win.dgbas.gov.tw/dgbas04/bc4/manpower/year/year_f.asp?table=51
2. 宮照馥 (2011)，組織好訂貨會的關鍵，紡織服裝周刊，第32期，頁48。
3. 財政部統計處 (2021)，營利事業家數及銷售額。引用日期：2021/05/01，
網址：https://web02.mof.gov.tw/njswww/WebMain.aspx?sys=100&funid=defjspf2
4. 孫慶龍 (2013)，從夕陽到旭日東昇的明星產業，貿易雜誌，第261期，頁44-47。
5. 經濟部統計處 (2021)，成衣及服飾品製造業營業額。引用日期：2021/05/01，
網址：https://dmz26.moea.gov.tw/GMWeb/investigate/InvestigateEC.aspx
6. 鄒伯衡 (2012)，台灣服飾業通路發展現況，物流技術與戰略雜誌，第60期，頁47-48。
7. 趙艷霞，尹宏偉 (2006)，服裝企業訂貨會分析與研究，國際紡織導報，第11期，頁77-81。

英文
1. Avison, D. & Fitzgerald, G. (2006), Information systems development: methodologies, techniques and tools, 4th, UK:Maidenhead: McGraw-Hill.
2. Carver, G. P. & Bloom, H. M. (1991), Concurrent Engineering Through Product Data Standards, NISTIR Report No.4573, Gaithersburg, MD: U.S. Department of Commerce, National Institute of Standards and Teclmology.
3. Davenport, T. H. (1993), Process Innovation Reengineering Work through Information Technology, Harvard Business School Press.
4. Davenport, T. H. & Short, J. E. (1990), The New Industrial Engineering: Information Technology and Business Process Redesign, Sloan Management Review, 31, pp. 11-27.
5. Dumas, M., Rosa, M. L., Mendling, J. & Reijers, H. A. (2013), Fundamentals of Business Process Management, Springer.
6. Erasmus, J. (2019), The application of business process management in smart manufacturing: towards dynamic allocation of manufacturing resources. Technische Universiteit Eindhoven.
7. Hall, J. A. (2011), Information Technology Auditing and Assurance, 3rd, South-Western Cengage Learning.
8. Hammer, M. (1990), Reengineering Work: Don′t Automate, Obliterate, Harvard Business Review, 68, pp. 104-112.
9. Hammer, M. & Champy, J. (1993), Reengineering the Corporation: A Manifesto for Business Revolution, New York: Harper Business Book.
10. Harrington, H. J. (1991), Business Process Improvement: The Breakthrough Strategy for Total Quality, Productivity, and Competitiveness, New York: McGraw-Hill.
11. Jackson, T. L. (2017), Standard work for lean healthcare, Productivity Press.
12. Janson, L. I. & Lundborg, E. P. (1992), Concurrent engineering: How Husqvama succeeded, Journal of Engineering Design Volume, 3(3), pp. 205-214.
13. Jeston, J. & Nelis, J (2006), Business Process Management: Practical Guidelines to Successful Implementations, Butterworth-Heinemann.
14. Kannengiesser, U., Neubauer, M. & Heininger, R. (2015), OPC UA Interface for a BPM Suite to Enable Seamless Process Management, Proceedings of 13th International Conference on Business Process Management, BPM 2015, Austria: Innsbruck, pp. 95-99.
15. Kasemset, C., Pinmanee, P. & Umarin, P. (2014), Application of ECRS and Simulation Techniques in Bottleneck Identification and Improvement: A Paper Package Factory, Proceedings of Asia Pacific Industrial Engineering & Management Systems Conference, South Korea: Jeju-si, pp. ¬¬¬¬¬¬¬1477-1484.
16. Kelendar, H. & Mohammed, A. M. (2020), Lean and the ecrs principle: developing a framework to minimise waste in healthcare sectors, International Journal of Public Health and Clinical Sciences, 7, pp. 98-110.
17. Koufteros, X., Vonderembse, M., Doll, W. (2001), Concurrent engineering and its consequences, Journal of Operations Management 19, pp. 97-111.
18. Love, P.E.D., Gunasekaran, A. & Li, H. (1998), Concurrent engineering: a strategy for procuring construction projects, International Journal of Project Management, 16, pp. 375-383.
19. Mills, R., Beckert, B., Kempfer, L. & Chalsma, J. (1992, July 20), Technology for world class engineering. IndustryWeek 241, (special section, CCl—CC35).
20. Moncarz, H. T. (1992), Information Technology Vision for the U.S. Fiber/Textile/Apparel Industry, NISTIR Report No.4986, Gaithersburg, MD: U.S. Department of Commerce, National Institute of Standards and Technology.
21. Perry, T. S. (1990), Teamwork plus technology cuts development time, IEEE Spectrum 27, pp. 61-67.
22. Pigage, L. C. & Tucker, J. L. (1954), Motion and time study, Urbana: Institute of Labor and Industrial Relations.
23. Prasad, B. (1996), Concurrent Engineering Fundamentals, Volume 1: Integrated Products and Process Organization, Prentice Hall.
24. Regan, C.L. (1997), A concurrent engineering framework for apparel manufacture, Virginia Polytechnic Institute and State University, Doctorate of Philosophy in Clothing And Textiles, Virginia.
25. Rosenblatt, A. & G.F. Watson. (1991), Concurrent Engineering, IEEE Spectrum 28, pp. 22-39.
26. Weske, M. (2007), Business process management, Springer.
27. Winner, R. I., Pennell, J. P., Bertrend, H. E. & Slusarczuk, M. M. G. (1988), “The Role of Concurrent Engineering in Weapons System Acquisition,” IDA Report R-338, Institute for Defence Analyses, Alexandria, VA.
28. Zairi, M. (1997), Business process management: a boundaryless approach to modern competitiveness, Business Process Management Journal, 3, pp. 64-80.

指導教授

范錚強(C.K. Farn)

審核日期

2021-7-20

推文