"Jeng,MC"的相關文件
回到依作者瀏覽
顯示 38 項.
|
類別 |
日期 |
題名 |
作者 |
檔案 |
類別 |
日期 |
題名 |
作者 |
檔案 |
類別 |
日期 |
題名 |
作者 |
檔案 |
| [機械工程研究所] 期刊論文 |
2009 |
An investigation of thermal sprayed aluminum/hard anodic composite coating on wear and corrosion resistant performance |
Chang,CH; Jeng,MC; Su,CY; Chang,CL |
 |
[機械工程研究所] 期刊論文 |
2009 |
An investigation of thermal sprayed aluminum/hard anodic composite coating on wear and corrosion resistant performance |
Chang,CH; Jeng,MC; Su,CY; Chang,CL |
|
[機械工程研究所] 期刊論文 |
2009 |
An investigation of thermal sprayed aluminum/hard anodic composite coating on wear and corrosion resistant performance |
Chang,CH; Jeng,MC; Su,CY; Chang,CL |
|
| [機械工程學系] 期刊論文 |
2011 |
A Study of Wear and Corrosion Resistance of Arc-Sprayed Ni-Ti Composite Coatings |
Chang,CH; Jeng,MC; Su,CY; Huang,TS |
|
[機械工程學系] 期刊論文 |
2011 |
A Study of Wear and Corrosion Resistance of Arc-Sprayed Ni-Ti Composite Coatings |
Chang,CH; Jeng,MC; Su,CY; Huang,TS |
|
[機械工程學系] 期刊論文 |
2011 |
A Study of Wear and Corrosion Resistance of Arc-Sprayed Ni-Ti Composite Coatings |
Chang,CH; Jeng,MC; Su,CY; Huang,TS |
|
| [機械工程研究所] 期刊論文 |
2009 |
Psychological Benefits of Virtual Reality for Patients in Rehabilitation Therapy |
Chen,CH; Jeng,MC; Fung,CP; Doong,JL; Chuang,TY |
|
[機械工程研究所] 期刊論文 |
2009 |
Psychological Benefits of Virtual Reality for Patients in Rehabilitation Therapy |
Chen,CH; Jeng,MC; Fung,CP; Doong,JL; Chuang,TY |
|
[機械工程研究所] 期刊論文 |
2009 |
Psychological Benefits of Virtual Reality for Patients in Rehabilitation Therapy |
Chen,CH; Jeng,MC; Fung,CP; Doong,JL; Chuang,TY |
|
| [機械工程研究所] 期刊論文 |
1999 |
Analyses and measurements on bending performance of gas-assisted injection molded parts |
Chen,SC; Hu,SY; Chien,RD; Jeng,MC |
|
[機械工程研究所] 期刊論文 |
1999 |
Analyses and measurements on bending performance of gas-assisted injection molded parts |
Chen,SC; Hu,SY; Chien,RD; Jeng,MC |
|
[機械工程研究所] 期刊論文 |
1999 |
Analyses and measurements on bending performance of gas-assisted injection molded parts |
Chen,SC; Hu,SY; Chien,RD; Jeng,MC |
|
| [機械工程研究所] 期刊論文 |
1999 |
Mechanical properties of gas-assisted injection moulded PS, PP and Nylon parts |
Chien,RD; Chen,SC; Jeng,MC; Yang,HY |
|
[機械工程研究所] 期刊論文 |
1999 |
Mechanical properties of gas-assisted injection moulded PS, PP and Nylon parts |
Chien,RD; Chen,SC; Jeng,MC; Yang,HY |
|
[機械工程研究所] 期刊論文 |
1999 |
Mechanical properties of gas-assisted injection moulded PS, PP and Nylon parts |
Chien,RD; Chen,SC; Jeng,MC; Yang,HY |
|
| [機械工程研究所] 期刊論文 |
1997 |
Tribological characteristics of short glass fibre reinforced polycarbonate composites |
Ho,KC; Jeng,MC |
|
[機械工程研究所] 期刊論文 |
1997 |
Tribological characteristics of short glass fibre reinforced polycarbonate composites |
Ho,KC; Jeng,MC |
|
[機械工程研究所] 期刊論文 |
1997 |
Tribological characteristics of short glass fibre reinforced polycarbonate composites |
Ho,KC; Jeng,MC |
|
| [機械工程研究所] 期刊論文 |
2004 |
Assessment of various display devices on a virtual reality-based hand rehabilitation system |
Huang,WS; Shing,CY; Fung,CP; Chuang,TY; Jeng,MC; Doong,JL |
|
[機械工程研究所] 期刊論文 |
2004 |
Assessment of various display devices on a virtual reality-based hand rehabilitation system |
Huang,WS; Shing,CY; Fung,CP; Chuang,TY; Jeng,MC; Doong,JL |
|
[機械工程研究所] 期刊論文 |
2004 |
Assessment of various display devices on a virtual reality-based hand rehabilitation system |
Huang,WS; Shing,CY; Fung,CP; Chuang,TY; Jeng,MC; Doong,JL |
|
| [機械工程研究所] 期刊論文 |
1993 |
POST WELD HEAT-TREATMENT EFFECTS ON FATIGUE-CRACK PROPAGATION IN AN ELECTRON-BEAM WELDMENT |
HWANG,JR; JENG,MC; WANG,CC |
|
[機械工程研究所] 期刊論文 |
1993 |
POST WELD HEAT-TREATMENT EFFECTS ON FATIGUE-CRACK PROPAGATION IN AN ELECTRON-BEAM WELDMENT |
HWANG,JR; JENG,MC; WANG,CC |
|
[機械工程研究所] 期刊論文 |
1993 |
POST WELD HEAT-TREATMENT EFFECTS ON FATIGUE-CRACK PROPAGATION IN AN ELECTRON-BEAM WELDMENT |
HWANG,JR; JENG,MC; WANG,CC |
|
| [機械工程研究所] 期刊論文 |
1997 |
Fatigue crack growth rate of zirconia ceramics |
Hwang,JR; Shih,JL; Jeng,MC |
|
[機械工程研究所] 期刊論文 |
1997 |
Fatigue crack growth rate of zirconia ceramics |
Hwang,JR; Shih,JL; Jeng,MC |
|
[機械工程研究所] 期刊論文 |
1997 |
Fatigue crack growth rate of zirconia ceramics |
Hwang,JR; Shih,JL; Jeng,MC |
|
| [機械工程學系] 期刊論文 |
2010 |
Rapid mold temperature control in injection molding by using steam heating |
Jeng,MC; Chen,SC; Minh,PS; Chang,JA; Chung,CS |
|
[機械工程學系] 期刊論文 |
2010 |
Rapid mold temperature control in injection molding by using steam heating |
Jeng,MC; Chen,SC; Minh,PS; Chang,JA; Chung,CS |
|
[機械工程學系] 期刊論文 |
2010 |
Rapid mold temperature control in injection molding by using steam heating |
Jeng,MC; Chen,SC; Minh,PS; Chang,JA; Chung,CS |
|
| [機械工程研究所] 期刊論文 |
1993 |
FINITE-ELEMENT ANALYSIS OF CRACK-GROWTH LIFE PREDICTION UNDER COMPLEX LOAD HISTORY |
JENG,MC; DOONG,JL; LIU,WC |
|
[機械工程研究所] 期刊論文 |
1993 |
FINITE-ELEMENT ANALYSIS OF CRACK-GROWTH LIFE PREDICTION UNDER COMPLEX LOAD HISTORY |
JENG,MC; DOONG,JL; LIU,WC |
|
[機械工程研究所] 期刊論文 |
1993 |
FINITE-ELEMENT ANALYSIS OF CRACK-GROWTH LIFE PREDICTION UNDER COMPLEX LOAD HISTORY |
JENG,MC; DOONG,JL; LIU,WC |
|
| [機械工程研究所] 期刊論文 |
1993 |
THE EFFECTS OF CARBON CONTENT AND MICROSTRUCTURE ON THE METAL REMOVAL RATE IN ELECTROCHEMICAL MACHINING |
JENG,MC; DOONG,JL; YANG,CW |
|
[機械工程研究所] 期刊論文 |
1993 |
THE EFFECTS OF CARBON CONTENT AND MICROSTRUCTURE ON THE METAL REMOVAL RATE IN ELECTROCHEMICAL MACHINING |
JENG,MC; DOONG,JL; YANG,CW |
|
[機械工程研究所] 期刊論文 |
1993 |
THE EFFECTS OF CARBON CONTENT AND MICROSTRUCTURE ON THE METAL REMOVAL RATE IN ELECTROCHEMICAL MACHINING |
JENG,MC; DOONG,JL; YANG,CW |
|
| [機械工程研究所] 期刊論文 |
2002 |
The study on the tribological properties of fiber-reinforced PBT composites for various injection molding process parameters |
Jeng,MC; Fung,CP; Li,TC |
|
[機械工程研究所] 期刊論文 |
2002 |
The study on the tribological properties of fiber-reinforced PBT composites for various injection molding process parameters |
Jeng,MC; Fung,CP; Li,TC |
|
[機械工程研究所] 期刊論文 |
2002 |
The study on the tribological properties of fiber-reinforced PBT composites for various injection molding process parameters |
Jeng,MC; Fung,CP; Li,TC |
|
| [機械工程研究所] 期刊論文 |
1993 |
WEAR BEHAVIOR OF SOLID LUBRICANTS AG AND BAF2-CAF2 OBTAINED BY LASER-SURFACE CLADDING |
JENG,MC; SOONG,YL |
|
[機械工程研究所] 期刊論文 |
1993 |
WEAR BEHAVIOR OF SOLID LUBRICANTS AG AND BAF2-CAF2 OBTAINED BY LASER-SURFACE CLADDING |
JENG,MC; SOONG,YL |
|
[機械工程研究所] 期刊論文 |
1993 |
WEAR BEHAVIOR OF SOLID LUBRICANTS AG AND BAF2-CAF2 OBTAINED BY LASER-SURFACE CLADDING |
JENG,MC; SOONG,YL |
|
| [機械工程研究所] 期刊論文 |
1991 |
WEAR BEHAVIOR OF COBALT-BASED ALLOYS IN LASER SURFACE CLADDING |
JENG,MC; YAN,LY; DOONG,JL |
|
[機械工程研究所] 期刊論文 |
1991 |
WEAR BEHAVIOR OF COBALT-BASED ALLOYS IN LASER SURFACE CLADDING |
JENG,MC; YAN,LY; DOONG,JL |
|
[機械工程研究所] 期刊論文 |
1991 |
WEAR BEHAVIOR OF COBALT-BASED ALLOYS IN LASER SURFACE CLADDING |
JENG,MC; YAN,LY; DOONG,JL |
|
| [機械工程研究所] 期刊論文 |
1993 |
ENVIRONMENTAL-EFFECTS ON WEAR BEHAVIOR OF ALUMINA |
JENG,MC; YAN,LY |
|
[機械工程研究所] 期刊論文 |
1993 |
ENVIRONMENTAL-EFFECTS ON WEAR BEHAVIOR OF ALUMINA |
JENG,MC; YAN,LY |
|
[機械工程研究所] 期刊論文 |
1993 |
ENVIRONMENTAL-EFFECTS ON WEAR BEHAVIOR OF ALUMINA |
JENG,MC; YAN,LY |
|
| [機械工程研究所] 期刊論文 |
2002 |
Comparison of thermal effects on the conical-cylindrical bearing with 2-D and 3-D energy equations |
Jeng,MC; Yang,YK |
|
[機械工程研究所] 期刊論文 |
2002 |
Comparison of thermal effects on the conical-cylindrical bearing with 2-D and 3-D energy equations |
Jeng,MC; Yang,YK |
|
[機械工程研究所] 期刊論文 |
2002 |
Comparison of thermal effects on the conical-cylindrical bearing with 2-D and 3-D energy equations |
Jeng,MC; Yang,YK |
|
| [機械工程研究所] 期刊論文 |
1993 |
ABRASIVE WEAR STUDY OF BAINITIC NODULAR CAST-IRON |
JENG,MC |
|
[機械工程研究所] 期刊論文 |
1993 |
ABRASIVE WEAR STUDY OF BAINITIC NODULAR CAST-IRON |
JENG,MC |
|
[機械工程研究所] 期刊論文 |
1993 |
ABRASIVE WEAR STUDY OF BAINITIC NODULAR CAST-IRON |
JENG,MC |
|
| [機械工程學系] 期刊論文 |
2011 |
Dry Sliding Wear Properties of Ultra-high Molecular Weight Polyethylene Parts Made by the Injection Molding Process |
Kuo,HC; Jeng,MC |
|
[機械工程學系] 期刊論文 |
2011 |
Dry Sliding Wear Properties of Ultra-high Molecular Weight Polyethylene Parts Made by the Injection Molding Process |
Kuo,HC; Jeng,MC |
|
[機械工程學系] 期刊論文 |
2011 |
Dry Sliding Wear Properties of Ultra-high Molecular Weight Polyethylene Parts Made by the Injection Molding Process |
Kuo,HC; Jeng,MC |
|
| [機械工程學系] 期刊論文 |
2011 |
The Influence of Injection Molding and Injection Compression Molding on Ultra-high Molecular Weight Polyethylene Polymer Microfabrication |
Kuo,HC; Jeng,MC |
|
[機械工程學系] 期刊論文 |
2011 |
The Influence of Injection Molding and Injection Compression Molding on Ultra-high Molecular Weight Polyethylene Polymer Microfabrication |
Kuo,HC; Jeng,MC |
|
[機械工程學系] 期刊論文 |
2011 |
The Influence of Injection Molding and Injection Compression Molding on Ultra-high Molecular Weight Polyethylene Polymer Microfabrication |
Kuo,HC; Jeng,MC |
|
| [機械工程學系] 期刊論文 |
2010 |
Effects of part geometry and injection molding conditions on the tensile properties of ultra-high molecular weight polyethylene polymer |
Kuo,HC; Jeng,MC |
|
[機械工程學系] 期刊論文 |
2010 |
Effects of part geometry and injection molding conditions on the tensile properties of ultra-high molecular weight polyethylene polymer |
Kuo,HC; Jeng,MC |
|
[機械工程學系] 期刊論文 |
2010 |
Effects of part geometry and injection molding conditions on the tensile properties of ultra-high molecular weight polyethylene polymer |
Kuo,HC; Jeng,MC |
|
| [機械工程學系] 期刊論文 |
2010 |
The influence of injection molding on tribological characteristics of ultra-high molecular weight polyethylene under dry sliding |
Kuo,HC; Jeng,MC |
|
[機械工程學系] 期刊論文 |
2010 |
The influence of injection molding on tribological characteristics of ultra-high molecular weight polyethylene under dry sliding |
Kuo,HC; Jeng,MC |
|
[機械工程學系] 期刊論文 |
2010 |
The influence of injection molding on tribological characteristics of ultra-high molecular weight polyethylene under dry sliding |
Kuo,HC; Jeng,MC |
|
| [機械工程研究所] 期刊論文 |
2006 |
Using data linkage to generate 30-day crash-fatality adjustment factors for Taiwan |
Lai,CH; Huang,WS; Chang,KK; Jeng,MC; Doong,JL |
|
[機械工程研究所] 期刊論文 |
2006 |
Using data linkage to generate 30-day crash-fatality adjustment factors for Taiwan |
Lai,CH; Huang,WS; Chang,KK; Jeng,MC; Doong,JL |
|
[機械工程研究所] 期刊論文 |
2006 |
Using data linkage to generate 30-day crash-fatality adjustment factors for Taiwan |
Lai,CH; Huang,WS; Chang,KK; Jeng,MC; Doong,JL |
|
| [機械工程研究所] 期刊論文 |
2009 |
Survival hazards of road environment factors between motor-vehicles and motorcycles |
Li,MD; Doong,JL; Huang,WS; Lai,CH; Jeng,MC |
|
[機械工程研究所] 期刊論文 |
2009 |
Survival hazards of road environment factors between motor-vehicles and motorcycles |
Li,MD; Doong,JL; Huang,WS; Lai,CH; Jeng,MC |
|
[機械工程研究所] 期刊論文 |
2009 |
Survival hazards of road environment factors between motor-vehicles and motorcycles |
Li,MD; Doong,JL; Huang,WS; Lai,CH; Jeng,MC |
|
| [機械工程研究所] 期刊論文 |
1997 |
Study of an assembly tolerance allocation model based Monte Carlo simulation |
Lin,CY; Huang,WH; Jeng,MC; Doong,JL |
|
[機械工程研究所] 期刊論文 |
1997 |
Study of an assembly tolerance allocation model based Monte Carlo simulation |
Lin,CY; Huang,WH; Jeng,MC; Doong,JL |
|
[機械工程研究所] 期刊論文 |
1997 |
Study of an assembly tolerance allocation model based Monte Carlo simulation |
Lin,CY; Huang,WH; Jeng,MC; Doong,JL |
|
| [機械工程學系] 期刊論文 |
2010 |
Study on Injection Molding Parameters for Thin-Shell Plastic Parts Using a Neural Network-Based Approach |
Lin,JC; Yang,YK; Hsiao,YH; Jeng,MC |
|
[機械工程學系] 期刊論文 |
2010 |
Study on Injection Molding Parameters for Thin-Shell Plastic Parts Using a Neural Network-Based Approach |
Lin,JC; Yang,YK; Hsiao,YH; Jeng,MC |
|
[機械工程學系] 期刊論文 |
2010 |
Study on Injection Molding Parameters for Thin-Shell Plastic Parts Using a Neural Network-Based Approach |
Lin,JC; Yang,YK; Hsiao,YH; Jeng,MC |
|
| [機械工程研究所] 期刊論文 |
2009 |
Evidence for the selective attention mechanism and dual-task interference |
Liu,CC; Doong,JL; Hsu,CC; Huang,WS; Jeng,MC |
|
[機械工程研究所] 期刊論文 |
2009 |
Evidence for the selective attention mechanism and dual-task interference |
Liu,CC; Doong,JL; Hsu,CC; Huang,WS; Jeng,MC |
|
[機械工程研究所] 期刊論文 |
2009 |
Evidence for the selective attention mechanism and dual-task interference |
Liu,CC; Doong,JL; Hsu,CC; Huang,WS; Jeng,MC |
|
| [機械工程研究所] 期刊論文 |
2009 |
RESPONSES IN A MANUAL TRACKING AND VISUAL DETECTION TASK |
Liu,CC; Doong,JL; Lin,CY; Lai,CH; Jeng,MC; Hwang,JR |
|
[機械工程研究所] 期刊論文 |
2009 |
RESPONSES IN A MANUAL TRACKING AND VISUAL DETECTION TASK |
Liu,CC; Doong,JL; Lin,CY; Lai,CH; Jeng,MC; Hwang,JR |
|
[機械工程研究所] 期刊論文 |
2009 |
RESPONSES IN A MANUAL TRACKING AND VISUAL DETECTION TASK |
Liu,CC; Doong,JL; Lin,CY; Lai,CH; Jeng,MC; Hwang,JR |
|
| [機械工程研究所] 期刊論文 |
2009 |
Integrated model of simulated occupant injury risk and real medical costs |
Liu,WC; Doong,JL; Tsai,SL; Lai,CH; Jeng,MC |
|
[機械工程研究所] 期刊論文 |
2009 |
Integrated model of simulated occupant injury risk and real medical costs |
Liu,WC; Doong,JL; Tsai,SL; Lai,CH; Jeng,MC |
|
[機械工程研究所] 期刊論文 |
2009 |
Integrated model of simulated occupant injury risk and real medical costs |
Liu,WC; Doong,JL; Tsai,SL; Lai,CH; Jeng,MC |
|
| [機械工程研究所] 期刊論文 |
2009 |
Optimization of turning operations with multiple performance characteristics using the Taguchi method and Grey relational analysis |
Tzeng,CJ; Lin,YH; Yang,YK; Jeng,MC |
|
[機械工程研究所] 期刊論文 |
2009 |
Optimization of turning operations with multiple performance characteristics using the Taguchi method and Grey relational analysis |
Tzeng,CJ; Lin,YH; Yang,YK; Jeng,MC |
|
[機械工程研究所] 期刊論文 |
2009 |
Optimization of turning operations with multiple performance characteristics using the Taguchi method and Grey relational analysis |
Tzeng,CJ; Lin,YH; Yang,YK; Jeng,MC |
|
| [機械工程學系] 期刊論文 |
2011 |
Optimization of wire electrical discharge machining of pure tungsten using neural network and response surface methodology |
Tzeng,CJ; Yang,YK; Hsieh,MH; Jeng,MC |
|
[機械工程學系] 期刊論文 |
2011 |
Optimization of wire electrical discharge machining of pure tungsten using neural network and response surface methodology |
Tzeng,CJ; Yang,YK; Hsieh,MH; Jeng,MC |
|
[機械工程學系] 期刊論文 |
2011 |
Optimization of wire electrical discharge machining of pure tungsten using neural network and response surface methodology |
Tzeng,CJ; Yang,YK; Hsieh,MH; Jeng,MC |
|
| [機械工程研究所] 期刊論文 |
2009 |
Optimization of die casting conditions for wear properties of alloy AZ91D components using the Taguchi method and design of experiments analysis |
Wen,JL; Yang,YK; Jeng,MC |
|
[機械工程研究所] 期刊論文 |
2009 |
Optimization of die casting conditions for wear properties of alloy AZ91D components using the Taguchi method and design of experiments analysis |
Wen,JL; Yang,YK; Jeng,MC |
|
[機械工程研究所] 期刊論文 |
2009 |
Optimization of die casting conditions for wear properties of alloy AZ91D components using the Taguchi method and design of experiments analysis |
Wen,JL; Yang,YK; Jeng,MC |
|
| [網路學習科技研究所 ] 期刊論文 |
2010 |
Integrating video-capture virtual reality technology into a physically interactive learning environment for English learning |
Yang,JC; Chen,CH; Jeng,MC |
|
[網路學習科技研究所 ] 期刊論文 |
2010 |
Integrating video-capture virtual reality technology into a physically interactive learning environment for English learning |
Yang,JC; Chen,CH; Jeng,MC |
|
[網路學習科技研究所 ] 期刊論文 |
2010 |
Integrating video-capture virtual reality technology into a physically interactive learning environment for English learning |
Yang,JC; Chen,CH; Jeng,MC |
|
| [機械工程研究所] 期刊論文 |
2005 |
Analysis and design of thermohydrodynamic on the hydraulic servo cylinder |
Yang,RT; Yang,YK; Lin,SS; Jeng,MC |
|
[機械工程研究所] 期刊論文 |
2005 |
Analysis and design of thermohydrodynamic on the hydraulic servo cylinder |
Yang,RT; Yang,YK; Lin,SS; Jeng,MC |
|
[機械工程研究所] 期刊論文 |
2005 |
Analysis and design of thermohydrodynamic on the hydraulic servo cylinder |
Yang,RT; Yang,YK; Lin,SS; Jeng,MC |
|
| [機械工程研究所] 期刊論文 |
2004 |
Analysis of viscosity interaction and heat transfer on the dual conical-cylindrical bearing |
Yang,YK; Jeng,MC |
|
[機械工程研究所] 期刊論文 |
2004 |
Analysis of viscosity interaction and heat transfer on the dual conical-cylindrical bearing |
Yang,YK; Jeng,MC |
|
[機械工程研究所] 期刊論文 |
2004 |
Analysis of viscosity interaction and heat transfer on the dual conical-cylindrical bearing |
Yang,YK; Jeng,MC |
|
| [機械工程研究所] 期刊論文 |
2004 |
Analysis of viscosity interaction on the misaligned conical-cylindrical bearing |
Yang,YK; Jeng,MC |
|
[機械工程研究所] 期刊論文 |
2004 |
Analysis of viscosity interaction on the misaligned conical-cylindrical bearing |
Yang,YK; Jeng,MC |
|
[機械工程研究所] 期刊論文 |
2004 |
Analysis of viscosity interaction on the misaligned conical-cylindrical bearing |
Yang,YK; Jeng,MC |
|
| [機械工程研究所] 期刊論文 |
2003 |
Thermohydrodynamic analysis of the misaligned conical-cylindrical bearing with non-Newtonian lubricants |
Yang,YK; Jeng,MC |
|
[機械工程研究所] 期刊論文 |
2003 |
Thermohydrodynamic analysis of the misaligned conical-cylindrical bearing with non-Newtonian lubricants |
Yang,YK; Jeng,MC |
|
[機械工程研究所] 期刊論文 |
2003 |
Thermohydrodynamic analysis of the misaligned conical-cylindrical bearing with non-Newtonian lubricants |
Yang,YK; Jeng,MC |
|
| [機械工程研究所] 期刊論文 |
2001 |
Analysis of thermal effects on the misaligned hydraulic servo cylinder |
Yang,YK; Jeng,MC |
|
[機械工程研究所] 期刊論文 |
2001 |
Analysis of thermal effects on the misaligned hydraulic servo cylinder |
Yang,YK; Jeng,MC |
|
[機械工程研究所] 期刊論文 |
2001 |
Analysis of thermal effects on the misaligned hydraulic servo cylinder |
Yang,YK; Jeng,MC |
|
|
