English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 94201/94201 (100%)
造訪人次 : 81559459      線上人數 : 3506
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋


    請使用永久網址來引用或連結此文件: https://ir.lib.ncu.edu.tw/handle/987654321/100047


    題名: Robust geotechnical design of shield-driven tunnels
    作者: 莊長賢;Gong, Wenping;Wang, Lei;Juang, C. Hsein;Zhang, Jie;Huang, Hongwei
    貢獻者: 工學院土木工程學系
    關鍵詞: Cost;Design engineering;Fuzzy;Fuzzy logic;Fuzzy set theory;Fuzzy sets;Geotechnics;Robustness;Safety;Shield-driven tunnel;Tunnels (transportation);Uncertainty
    日期: 2014-03-01
    上傳時間: 2026-04-21 13:46:56 (UTC+8)
    出版者: Elsevier BV;Elsevier Ltd
    摘要: 摘要: This paper presents a fuzzy set-based robust geotechnical design (RGD) methodology for the design of shield-driven tunnels. Here, uncertain geotechnical parameters required for analysis of tunnel performance (referred to herein as the structure safety and serviceability performance of tunnel cross section) are represented as fuzzy sets. Given fuzzy input parameters, the performance of a shield-driven tunnel will be uncertain, which is expressed in this study as a fuzzy factor of safety, according to the analysis of vertex method. Then, the fuzzy factor of safety for a given design is used to evaluate the failure probability and design robustness, which are, in turn, employed in the proposed RGD framework. Note that a design is considered robust if the performance of the shield-driven tunnel is insensitive to the variation of its uncertain geotechnical parameters. Within the RGD framework, each candidate design in the design space is analyzed for its safety state (in terms of failure probability), design robustness, and cost. The goal of the RGD of a shield-driven tunnel is to bring the safety state to an acceptable level, while maximizing the robustness and cost efficiency simultaneously. To this end, a multi-objective optimization is performed and a Pareto front is obtained, which provides a trade-off that may be used to select the most preferred design. Through an illustrative case, the effectiveness and significance of this new robust design methodology is demonstrated.
    出版者: Elsevier Ltd
    出版日期: 2014-03
    出處: Computers and geotechnics, 2014-03, Vol.56, p.191-201
    資源來源: ScienceDirect (Elsevier) Journals
    版權: 2013 Elsevier Ltd
    識別號: ISSN: 0266-352X
    識別號: EISSN: 1873-7633
    識別號: DOI: 10.1016/j.compgeo.2013.12.006
    顯示於類別:[土木工程學系 ] 期刊論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbHTML12檢視/開啟


    在NCUIR中所有的資料項目都受到原著作權保護.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明