Droplet compression and relaxation by a superhydrophobic surface: Contact angle hysteresis

NCUIR > Engineering College > Department of Chemical and Materials Engineering > journal & Dissertation > Item 987654321/100216

請使用永久網址來引用或連結此文件: https://ir.lib.ncu.edu.tw/handle/987654321/100216

題名:	Droplet compression and relaxation by a superhydrophobic surface: Contact angle hysteresis
作者:	曹恆光;Hong, Siang-Jie;Chou, Tung-He;Chan, Seong Heng;Sheng, Yu-Jane;Tsao, Heng-Kwong
貢獻者:	工學院化學工程與材料工程學系
關鍵詞:	Chemistry;contact angle;droplets;Exact sciences and technology;General and physical chemistry;hydrophobicity;hysteresis;Solid-liquid interface;Surface physical chemistry
日期:	2012-04-03
上傳時間:	2026-04-21 13:53:58 (UTC+8)
出版者:	American Chemical Society;Washington, DC: American Chemical Society
摘要:	摘要： In this article, the contact angle hysteresis (CAH) of acrylic glass is experimentally and theoretically studied through the compression–relaxation process of droplets by using a superhydrophobic surface with negligible CAH effect. In contrast to the existing technique in which the volume of the droplet changes during the measurement of CAH, this procedure is carried out at a constant volume of the droplet. By observing the base diameter (BD) and the contact angle (CA) of the droplet during the compression–relaxation process, the wetting behavior of the droplet can be divided into two regimes, the contact line withdrawal and the contact line pinning regimes, depending on the gap thickness (H) at the end of the compression process. During the compression process, both regimes possess similar droplet behavior; the contact line will move outward and the BD will expand while the CA remains at the advancing angle. During the relaxation process, the two regimes are significantly different. In the contact line withdrawal regime, the contact line will withdraw with the CA remaining at the receding angle. In the contact line pinning regime, however, the contact line will be pinned at the final position and the CA will decline to a certain value higher than the receding angle. Furthermore, the advancing pinning behavior can also be realized through a successive compression–relaxation process. On the basis of the liquid-induced defects model, Surface Evolver simulations are performed to reproduce the behavior of the droplet during the compression–relaxation process; both contact line withdrawal and pinning regimes can also be identified. The results of the experiment and simulation agree with each other very well. 其他題名： Langmuir 出版者： Washington, DC: American Chemical Society 出版日期： 2012-04-03 出處： Langmuir, 2012-04, Vol.28 (13), p.5606-5613 資源來源： American Chemical Society (ACS) - Revues 版權： Copyright © 2012 American Chemical Society 版權： 2015 INIST-CNRS 識別號： ISSN: 0743-7463 識別號： ISSN: 1520-5827 識別號： EISSN: 1520-5827 識別號： DOI: 10.1021/la300382j 識別號： PMID: 22390774 識別號： CODEN: LANGD5
顯示於類別:	[Department of Chemical and Materials Engineering] journal & Dissertation

文件中的檔案:

檔案	描述	大小	格式	瀏覽次數
index.html		0Kb	HTML	20	檢視/開啟

在NCUIR中所有的資料項目都受到原著作權保護.

社群 sharing

資料載入中.....