English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 94201/94201 (100%)
造訪人次 : 81663423      線上人數 : 4049
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋
    NCU Institutional Repository > 理學院 > 化學學系 > 期刊論文 >  Item 987654321/100967


    請使用永久網址來引用或連結此文件: https://ir.lib.ncu.edu.tw/handle/987654321/100967


    題名: Dispersive micro solid-phase extraction coupled with ultrasound-assisted solvent desorption for determination of synthetic polycyclic and nitro-aromatic musks in aqueous samples
    作者: 丁望賢;Chung, Wu-Hsun;Tzing, Shin-Hwa;Huang, Man-Chun;Ding, Wang-Hsien
    貢獻者: 理學院化學學系
    關鍵詞: Dispersive micro solid-phase extraction;GC-MS;Synthetic musks;Water analysis
    日期: 2014-01-01
    上傳時間: 2026-04-21 14:19:45 (UTC+8)
    出版者: Wiley-Blackwell;Weinheim: WILEY-VCH Verlag
    摘要: 摘要: An optimized method for the determination of five synthetic polycyclic: celestolide (ADBI), phantolide (AHMI), traseolide (ATII), galaxolide (HHCB), tonalide (AHTN), and two nitro‐aromatic musks: musk xylene (MX) and musk ketone (MK), in water samples is described. The method involves a dispersive micro solid‐phase extraction (D‐μ‐SPE) plus ultrasound‐assisted solvent desorption (UASD) prior to their determination by gas chromatography‐mass spectrometry (GC‐MS) using the selected ion storage (SIS) mode. Factors affecting the extraction efficiency of the target analytes from water samples and ultrasound‐assisted solvent desorption were optimized by a Box‐Behnken design method. The optimal extraction conditions involved immersing 10.1 mg of a typical octadecyl (C18) bonded silica adsorbent (i.e., ENVI‐18) in a 50 mL water sample. After 10.4 min of extraction by vigorously shaking, the adsorbent was collected and dried on a filter, and the target musks were desorbed by ultrasound‐assisted for 38 sec with n‐hexane (200 μL) as the desorption solvent. A 10 μL aliquot was then directly determined by large‐volume injection GC‐MS. The limits of quantitation (LOQs) were 1.2 to 5 ng/L. The precision for these analytes, as indicated by relative standard deviations (RSDs), were less than 11% for both intra‐ and inter‐day analysis. Accuracy, expressed as the mean extraction recovery, was between 74% and 92%. A preliminary analysis of the effluents from municipal wastewater treatment plants (MWTP) and river water samples revealed that HHCB and AHTN were the two most commonly detected synthetic musks; their concentration were determined to range from 88 to 690 ng/L for effluent samples, and 5 to 320 ng/L for river water samples. This is a simple, low cost, effective, and eco‐friendly analytical method. A simple and reliable D‐μ‐SPE plus UASD method was developed and optimized to quantitatively determine seven commonly used synthetic musks in environmental aqueous samples. This method does not require the acquisition of dedicated instrumentation and low volumes of organic solvents are used, it is easy and rapid, thus making it a candidate for use in routine analysis in monitoring programs.
    其他題名: Jnl Chinese Chemical Soc
    出版者: Weinheim: WILEY-VCH Verlag
    出版日期: 2014-09
    出處: Journal of the Chinese Chemical Society (Taipei), 2014-09, Vol.61 (9), p.1031-1038
    版權: Copyright © 2014 The Chemical Society Located in Taipei & Wiley‐VCH Verlag GmbH & Co. KGaA, Weinheim, Germany
    識別號: ISSN: 0009-4536
    識別號: EISSN: 2192-6549
    識別號: DOI: 10.1002/jccs.201300666
    顯示於類別:[化學學系] 期刊論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbHTML16檢視/開啟


    在NCUIR中所有的資料項目都受到原著作權保護.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明