MDPI Multidisciplinary Digital Publishing Institute;Switzerland: MDPI AG
摘要:
摘要： In this study, a polarization-control setup for intensity-resolved guided mode resonance sensors is proposed and demonstrated experimentally. The experimental results are in good agreement with the simulation data based on rigorous coupled wave approach calculations. The proposed intensity-resolved measurement setup transfers polarization ellipses, which are produced from guided mode resonance to a linear polarization state under a buffer solution condition, and then suppresses the signals to dark using a polarization-control set. Hence, any changes in the refractive index results in an increase in the intensity signals. Furthermore, no wavelength-resolved or angular-resolved measurement is needed in this scheme. According to the experimental results, a wide linear detection range of 0.014 refractive index units is achieved and the limit of detection is 1.62E-4 RIU. 其他題名： Sensors (Basel) 出版者： Switzerland: MDPI AG 出版日期： 2014-03-12 出處： Sensors (Basel, Switzerland), 2014-03, Vol.14 (3), p.5198-5206 資源來源： Publicly Available Content Database 版權： Copyright MDPI AG 2014 版權： 2014 by the authors; licensee MDPI, Basel, Switzerland. 2014 識別號： ISSN: 1424-8220 識別號： EISSN: 1424-8220 識別號： DOI: 10.3390/s140305198 識別號： PMID: 24625743
