摘要： [Display omitted] •The influence of surface roughness on contact angle hysteresis is studied.•Surface roughness is systematically altered on some polymeric substrates by mechanical roughening.•The wettability on the substrates is also modified by vapor-phase deposition of PFOTS.•Three types of the receding contact angle behavior are identified identified as roughness increases.•A mechanism based on the stability of air pockets is proposed to explain experimental findings. Contact angle hysteresis plays a paramount role in anti-smudge surfaces. In this study, surface roughness is systematically altered on some polymeric substrates such as polystyrene and poly(methyl methacrylate) by roughening and its effect on contact angle hysteresis is investigated via measuring advancing and receding contact angles of water. The wettability on these substrates is also modified by vapor-phase deposition of perfluorooctyltrichlorosilane, while the surface morphology is kept the same. As surface roughness is increased, the advancing contact angle grows but three types of the receding contact angle (θr) behavior have been identified: (i) monotonic reduction of θr, (ii) monotonic enhancement of θr, and (iii) presence of a minimum of θr. A plausible mechanism based on the stability of air pockets is proposed to explain our experimental findings. The manipulation of receding contact angles can be achieved based on our findings. 出版者： Elsevier B.V 出版日期： 2015-11-15 出處： Applied surface science, 2015-11, Vol.355, p.127-132 版權： 2015 Elsevier B.V. 識別號： ISSN: 0169-4332 識別號： EISSN: 1873-5584 識別號： DOI: 10.1016/j.apsusc.2015.07.078
