A comparison of crystallization behaviors of laser spot welded Zr-Cu-Ag-Al and Zr-Cu-Ni-Al bulk metallic glasses

NCUIR > Engineering College > Institute of Materials Science and Engineering > journal & Dissertation > Item 987654321/103309

Please use this identifier to cite or link to this item: https://ir.lib.ncu.edu.tw/handle/987654321/103309

Title:	A comparison of crystallization behaviors of laser spot welded Zr-Cu-Ag-Al and Zr-Cu-Ni-Al bulk metallic glasses
Authors:	鄭憲清;Wang, Huei-Sen;Su, Yan-Zong;Shian-Ching Jang, Jason;Chen, Hou-Guang
Contributors:	工學院材料科學與工程研究所
Keywords:	Composite materials;Electron microscopy;Microstructure;Welding
Date:	2013-04-15
Issue Date:	2026-04-23 11:27:37 (UTC+8)
Publisher:	Elsevier BV;Elsevier B.V
Abstract:	摘要： A novel Ni-free Zr–Cu–Ag–Al ((Zr48Cu36Ag8Al8)Si0.75) and a Zr–Cu–Ni–Al ((Zr53Cu30Ni9Al8)Si0.5) bulk metallic glass (BMG), for comparison, were employed for Nd:YAG laser spot welding with three pre-selected energy inputs, including a low (6.2 J), a medium (8.0 J) and a high (9.2 J) energy input. After the welding process, the microstructure evolution, glass-forming ability (GFA) and mechanical properties of the welded samples were determined by a combination of scanning electron microscopy (SEM), transmission electron microscopy (TEM), differential scanning calorimetry (DSC) and the Vicker's microhardness test. The results showed the Zr–Cu–Ag–Al BMG has better weldability than the Zr–Cu–Ni–Al BMG. No crystallization was observed in the weld fusion zones (WFZs) or heat-affected zones (HAZs) of the welds under three pre-selected energy inputs. Therefore, the GFA indices of ΔTx (ΔTx = Tx − Tg, Tx is the crystallization temperature and Tg is the glass transition temperature), γ (γ = Tx/(Tg + Tl), Tl is the liquidus temperature) and γm (γm = (2Tx − Tg)/Tl), and the mechanical properties of the Zr–Cu–Ag–Al BMG welds did not differ significantly in comparison to the parent material (PM). For Zr–Cu–Ni–Al BMG, HAZ crystallization was unavoidable when a lower energy input was used; therefore, the GFA indices and mechanical properties of the weld were affected. Furthermore, when the GFA indices, ΔTx, γ and γm, were used to predict the thermal stability of the BMG HAZs, ΔTx seemed to correspond more directly to the HAZ crystallization behaviors in this study. It was observed that the ΔTx value of Zr–Cu–Ag–Al BMG was about 26% higher compared to that of Zr–Cu–Ni–Al BMG. ► A Zr–Cu–Ag–Al BMG and, for comparison, a Zr–Cu–Ni–Al BMG, were laser spot welded. ► The results showed the Zr–Cu–Ag–Al BMG has better weldability. ► For the Zr–Cu–Ni–Al BMG, HAZ crystallization was unavoidable. ► However, no crystallization was observed in the Zr–Cu–Ag–Al BMG welds. ► GFA index, ΔTx, is directly corresponded to the BMG HAZ crystallization behaviors. 出版者： Elsevier B.V 出版日期： 2013-04-15 出處： Materials chemistry and physics, 2013-04, Vol.139 (1), p.215-219 版權： 2013 Elsevier B.V. 識別號： ISSN: 0254-0584 識別號： EISSN: 1879-3312 識別號： DOI: 10.1016/j.matchemphys.2013.01.025
Appears in Collections:	[Institute of Materials Science and Engineering] journal & Dissertation

Files in This Item:

File	Description	Size	Format
index.html		0Kb	HTML	14	View/Open

社群 sharing

Loading...