Effect of cooling rate during solution heat treatment on the microstructure and mechanical properties of SP-700 titanium alloys

NCU Institutional Repository > 工學院 > 材料科學與工程研究所 > 期刊論文 > Item 987654321/103490

請使用永久網址來引用或連結此文件: https://ir.lib.ncu.edu.tw/handle/987654321/103490

題名:	Effect of cooling rate during solution heat treatment on the microstructure and mechanical properties of SP-700 titanium alloys
作者:	李勝隆;Nieh, Jo-Kuang;Wu, Chih-Ting;Chen, Yen-Lin;Wei, Chao-Nan;Lee, Sheng-Long
貢獻者:	工學院材料科學與工程研究所
關鍵詞:	EI;heat treatment;martensite;mechanical properties;SCIE;Scopus;titanium alloy;TSCI
日期:	2016-01-01
上傳時間:	2026-04-23 11:31:31 (UTC+8)
出版者:	National Taiwan Ocean University;台灣: 國立臺灣海洋大學
摘要:	摘要： The relationship between the microstructures and the me-chanical properties of solution-treated SP-700 titanium alloys, as obtained with different cooling rates, was investigated. The results indicate that the water-quenched alloy contains the primary a(ap), a”-martensite and residual B(Br) phases. Aging heat treatment can convert both a”-martensite and the Br phases to the fine-grained a + B equilibrium phases, resulting in a significant increase in tensile strength and hardness. Both the air-cooled and furnace-cooled alloys consist of the ap, a and B phases. The air-cooled alloy containing the fine-grained a phase has relatively higher hardness. Aging heat treatment causes only a slight enhancement in tensile properties because it cannot convert the phases in both alloys. Stress-induced martensitic phase transformation occurs in the water-quenched alloy under applied stress, after which the alloy exhibits higher tensile strength, higher ductility, and lower yield strength. 出版者：台灣: 國立臺灣海洋大學出版日期： 2016-04-01 出處： Journal of Marine Science and Technology, 2016-04, Vol.24 (2), p.099-106 資源來源： Airiti Library 識別號： ISSN: 1023-2796 識別號： DOI: 10.6119/JMST-015-0409-1
顯示於類別:	[材料科學與工程研究所 ] 期刊論文

文件中的檔案:

檔案	描述	大小	格式	瀏覽次數
index.html		0Kb	HTML	16	檢視/開啟

在NCUIR中所有的資料項目都受到原著作權保護.

社群 sharing

資料載入中.....