English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 94201/94201 (100%)
造訪人次 : 81663423      線上人數 : 4049
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋


    請使用永久網址來引用或連結此文件: https://ir.lib.ncu.edu.tw/handle/987654321/103519


    題名: Effect of partial crystallisation on mechanical properties of (Cu 42Zr 42Al 8Ag 8) 99.5Si 0.5 bulk metallic glass
    作者: 鄭憲清;Tsai, P H;Wang, S K;Jian, S R;Lee, I S;Chang, Y Z;Lin, Y Z;Jang, J S C;Li, C
    貢獻者: 工學院材料科學與工程研究所
    關鍵詞: Bulk metallic glass;Crystallisation;Isothermal annealing;Mechanical properties
    日期: 2012-02-01
    上傳時間: 2026-04-23 11:32:04 (UTC+8)
    出版者: Maney Publishing;London: Taylor & Francis
    摘要: 摘要: The (Cu 42 Zr 42 Al 8 Ag 8 ) 99·5 Si 0·5 bulk metallic glass (BMG) rods, 3 mm in diameter, with different fractions of nanocrystalline phase were prepared by isothermal annealing the as cast BMG rods at the temperature within the supercooled temperature region for different time periods in vacuum respectively. The result of hardness and compression test revealed that the hardness and yield strength of compression test all exhibit an increasing trend with crystallisation fraction. The maximum 1990 MPa yield strength, 2100 MPa fracture strength and 5% failure strain occur at the 50% crystallised BMG sample (with an average size about 60 nm). This suggests that these homogeneous distributed nanocrystals embedded in the amorphous matrix may act as a network obstacle in the glassy matrix to restrict the propagation of highly localised shear banding, avoiding catastrophic shearing-off through the whole sample and result in improving the plasticity.
    出版者: London: Taylor & Francis
    出版日期: 2012-02-01
    出處: Materials science and technology, 2012-02, Vol.27 (1), p.43-45
    版權: 2012 W. S. Maney & Son Ltd. 2012
    版權: (©) 2012 W. S. Maney & Son Ltd.
    識別號: ISSN: 1066-7857
    識別號: ISSN: 0267-0836
    識別號: EISSN: 1753-5557
    識別號: EISSN: 1743-2847
    識別號: DOI: 10.1179/175355511X13240279341083
    識別號: CODEN: MSCTEP
    顯示於類別:[材料科學與工程研究所 ] 期刊論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbHTML12檢視/開啟


    在NCUIR中所有的資料項目都受到原著作權保護.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明