Design and fabrication of multiplexer driver for InP-laser arrays with waveguide

NCU Institutional Repository > 資訊電機學院 > 電機工程學系 > 期刊論文 > Item 987654321/106933

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://ir.lib.ncu.edu.tw/handle/987654321/106933

题名:	Design and fabrication of multiplexer driver for InP-laser arrays with waveguide
作者:	龔存雄;Liou, Jian-Chiun;Gong, Cihun-Siyong Alex;Yang, Cheng-Fu;Fang, Yen-Hsiang
贡献者:	資訊電機學院電機工程學系
关键词:	Characterization and Evaluation of Materials;Computer Communication Networks;Electrical Engineering;Lasers;Micro/Nano Photonics for the International Year of Light 2015;Optical Devices;Optics;Photonics;Physics;Physics and Astronomy
日期:	2016-02-01
上传时间:	2026-04-23 13:49:18 (UTC+8)
出版者:	Springer New York;New York: Springer US
摘要:	摘要： To reduce the noise interference, we designed multiplexer-drive circuit used in InP laser array. This system is the use of D-Filp Flop circuit architecture do digital operations. It controls two adjacent InP laser systems, two InP laser is not functioning at the same time and will not cause interference. In order to investigate the micro-disk laser under the band at 1310 nm, this system using 2 mm × 2 mm InP laser chips bonding through the DVS-BCB to 2 cm × 2 cm hybrid laser processes, including SOI wafer waveguides, processing approach and chip architecture photo investigations. The I–V curve measured under the needle was found operating under current of approximately 30 mA at 1.5 V. The maximum optical power is about 2.2 μW at 40 mA. 其他題名： Opt Quant Electron 出版者： New York: Springer US 出版日期： 2016-02-01 出處： Optical and quantum electronics, 2016-02, Vol.48 (2), Article 97 版權： Springer Science+Business Media New York 2016 識別號： ISSN: 0306-8919 識別號： EISSN: 1572-817X 識別號： DOI: 10.1007/s11082-016-0401-9
显示于类别:	[電機工程學系] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	17	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing

数据加载中.....