A study on the application of newly developed magneto-elastic abrasive to improving the surface roughness of the bore

NCU Institutional Repository > 工學院 > 機械工程學系 > 期刊論文 > Item 987654321/108247

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://ir.lib.ncu.edu.tw/handle/987654321/108247

题名:	A study on the application of newly developed magneto-elastic abrasive to improving the surface roughness of the bore
作者:	顏炳華;Chen, Wei-Chan;Wu, Kun-Ling;Yan, Biing-Hwa
贡献者:	工學院機械工程學系
关键词:	CAE) and Design;Computer-Aided Engineering (CAD;Engineering;Flux density;Industrial and Production Engineering;Magnetic flux;Mechanical Engineering;Media Management;Original Article;Parameters;Polishes;Polishing;Surface roughness;Turning (machining);Workpieces
日期:	2014-01-01
上传时间:	2026-04-23 14:40:22 (UTC+8)
出版者:	Springer London;London: Springer London
摘要:	摘要： Spiral polishing mechanism refers to the technology of applying a high-speed turning screw rod in the process of workpiece surface polishing. For the purpose of increasing the machining effect, a powerful ring magnet was installed around the workpiece. In this study, the new self-developed magneto-elastic abrasive would be used to polish the inner wall of the bore, the so-called workpiece surface, under the attraction of the surrounding magnet and the drive of the turning rod. The new magneto-elastic abrasive not only eased the polishing force by its flexibility but also avoided deep scratches on the workpiece surface. The control of machining parameters on surface roughness and material removal were discussed to look for the best combination of the parameters; at the same time, the effects of each parameter on the workpiece surface topography after the polishing were also examined. The results of the experiment indicated that magnetic flux density and magneto-elastic abrasive concentration affected the surface roughness the most. In addition, the newly developed magneto-elastic abrasive significantly improved the polishing effect of the workpiece surface, at the rate of 94 %. 其他題名： Int J Adv Manuf Technol 出版者： London: Springer London 出版日期： 2014-08-01 出處： International journal of advanced manufacturing technology, 2014-08, Vol.73 (9-12), p.1557-1566 資源來源： EBSCOhost Academic Search Premier 版權： Springer-Verlag London 2014 版權： The International Journal of Advanced Manufacturing Technology is a copyright of Springer, (2014). All Rights Reserved. 識別號： ISSN: 0268-3768 識別號： EISSN: 1433-3015 識別號： DOI: 10.1007/s00170-014-5942-0
显示于类别:	[機械工程學系] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	16	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing

数据加载中.....